Question about Cars & Trucks

Open Question

I received a Yamaha warrior three fifty I'm not sure what year can't find ID tag anyways starts and runs great Only problem is when I am accelerating harder than normal or all the way there is an extremely loud knock from the left rear I can let off and it will stop I can accelerate normal and top out no sounds I can gear down still no sound just hard acceleration the chain has slack enough to move roughly one to two inches Its either rear of motor at output shaft or back axle first ATV Ive had ever make this sound Also when accelerating and it starts knocking it slows down dramatically like a chain skipping teeth Im really not sure what going on Any help here would be appreciated

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 350 Answers

SOURCE: Loud ticking/knocking/rattling sound when I start/accelerate

hi is it miss-firing as it sounds like a knocking noise can be anything but if you can feel it on the accelerater pedal then the noise sounds like its on the inlet valve side which would transfere the noise up the throttle body where the accelerater is located it could be something as simple as a tappet come loose to a burned valve you need to have a look do a compression test and take the rocker cover off see if theres anything come loose yates210456

Posted on Oct 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I received a Yamaha warrior three fifty I'm not sure what year can't find ID tag anyways starts and runs great Only problem is when I am accelerating harder than normal or all the way there is an extremely...


Check your front sprocket for missing teeth. I have broken all of them off and it would only slip at times making a horrible sound and I have also had every other tooth go missing. This is all due to a wore out chain. You need to check you chain for wear by pulling it away from the rear sprocket. If you can pull it away from the sprocket and see a fair amount of space between the teeth, replace the chain. Also both sprockets at the same time. Repost another question if more problems

Apr 14, 2014 | Cars & Trucks

2 Answers

Noisy valve lifters


Hi, not sure from that end but how many km you have on that car, cose if it done 100,00.000-120,00.00 km You realy should pay attention or replace your timing belt, cos the noise you hearing could be from there not your valves, but if not changed in time the damage from that could escalate on that car to anywer $2-3 K, eazy. Anyway it just a thout 4 you. G/luck.
Tony

Jan 28, 2014 | BMW Cars & Trucks

1 Answer

1993 festiva replaced the throttle body gasket now will not accelerate at temp


I have a 1997 ford E 150 customize mark 3 van have driven back and forth to work 5 years ran great Christmas Day drove down to the garage and back up to house and now it will not start turns over has spark will not fire

Jan 07, 2014 | 1993 Ford Festiva

1 Answer

I keep getting engine noise on my shogun sport warrior with acceleration usually around 60mph but sometime less. The noise can be described as like the sound I had on my BMX as a kid when you stuck a...


Try getting some additives to clean your lifters...i think they are called lifter free..a nulon product ..change oil and filter and then try it or get new lifters installed and adjusted.Blocked lifters will make a sound like that and it's pretty common with mitshubishi.Also check if your idler bearings are ok.

Sep 21, 2010 | Mitsubishi Outlander Cars & Trucks

1 Answer

Instrument panel.


There is a bad connection at the cluster,remove the cluster,and check the plug in to the cluster,it is a bad connection.Also check the alternator to make sure there is enough volts present,with everything on,lights,ac/heater,on high,it should read at the battery,while engine running,13.65 volts,to 14.25 volts,if it is any lower,replace the alternator.

Jan 24, 2010 | 2003 Chevrolet Cavalier

1 Answer

My 1986 Ranger 2.9 liter is hard to start (i have to pump the gas to get it to start) once it starts it runs fine until it gets warmed up then when you step on the gas it falls flat no power will not move,...


Just taking a shot here as I have seen the same thing in the shop in that last month....I am going to throw you two scenarios as you don't say if it has a carb or F.I.
If it is Fuel Injection the filter or a weak pump would be the culprit.
If it is a carb engine there is an item called an accelerator pump. this pump pumps fuel into the throat unmixed so during startup and on acceleration it needs this raw fuel, on startup to just get fuel into the chambers and on acceleration when switching from the Idle to the venturi there is a dead spot that this pump covers for.. A 20 dollar rebuild kit for the carb is all you need. there should be a tag on the carb for the ID to give to the parts store..

Mar 08, 2009 | 1986 Ford Ranger 2WD

1 Answer

The 2000 mountianeer starts and runs fine but shuts off


CHECK THE COLD START ENRICHMENT VALVE AND OR THE IDLE CONTROL VALVE. I AM ASSUMING THAT YOUR VEHICLE IS FUEL INJECTED. ONE OF THOSE HAVE GONE BAD.

Jan 24, 2009 | 2000 Mercury Mountaineer

1 Answer

2000 Volvo s70 sedan won't run smoothly when holding it at a steady acceleration


Sounds like fuel starvation. Would suggest cleaning any filters in the fuel line or replacing.
Also check the stop idle valve. This should be inline in the air intake pipe to the intake manifold..
Remove it and clean with WD40.Make sure you note the orientation of the spring.
To reset the ECU disconnect the battery for 5 minute the reconnect. The ECU should reset to factory settings. Make sure you know radio and alarm codes!
Try petrol additive STP or Redex to clean inside the engine.
Thats as far as my knowledge goes, hope it helps.

Oct 02, 2008 | 1998 Volvo S70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...