Question about 2011 Chevrolet Camaro

Open Question

Which wires do i hook my g-force chip on 2012 camaro

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What wires do I use on my 2012 chevy hook up my gforce performance chip

G-force has what wires to hook to on the air inlet temp sensor, didn't help much on my Chevy truck. Seems to have a little more power but mileage didn't improve much.

Oct 25, 2013 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

How to drain diesel out oa 2012 camaro

Best to unhook the fuel line and either let the fuel pump run it out or use something like vacula brake bleeder to draw it out

Jan 26, 2013 | 2012 Chevrolet Camaro

1 Answer

Hooking up g-force chip & need to know what 2 wire of three from maf sensor to use

That is no chip it is a 10 cent resistor and a real rip off. The signal is altered from the MAF and this can result in severe detonation and engine damage.

Oct 19, 2012 | Cars & Trucks

1 Answer

I need to know where the battery is located on my new 2012 SS Camaro

My first guess would be under the rear seat, but call the dealer and they can tell you for sure.

Aug 17, 2011 | 2012 Chevrolet Camaro

1 Answer

I replaced the ignition in my 92 camaro because the key broke off inside it. I got a new igition and new key and it wont start. It would turnover, but nothing more

did u check .to make sure all the wires on the bottom of the steering cloum are hooked up. and make sure the ignition switch is the correct on ,if it has the fuel security chip on the key some gm models have a chip in the key this controls the fuel pump ,,whit out it the fuel pump will not turn on

Nov 12, 2009 | 1992 Chevrolet Camaro

3 Answers

1990 camaro was bought 3 weeks ago has a

I believe it is electrical, and someone,
1.Has tried to bypass the use of the correct ignition key,
2.Or a fusible link for the starter is blown.

Does the ignition key have a chip on the side of it? The 1990 Camaro uses an ignition key with a resistor on the side of it. (Chip)

I had a guy install a radio, cut many wires, then wired it up wrong.
I found fusible links in the engine compartment that were blown, and wires that weren't hooked up correctly.
Took a couple of days, plus the wiring schematic for the engine compartment, and interior, to figure out what he had done!

My suggestion would be to find out if the ignition key fits THAT car first. (Dealer info)
Find out if it's the correct steering column.
Then look under the engine compartment to check out the starter wiring. You'll need 1990 Camaro wiring diagrams.

The prior owner bypassed the ignition switch with that push button momentary switch, because either/or a fusible link has melted through, or it is the wrong ignition key. (And maybe a different steering column complete with key switch!)

The 'Chip' on the key is a resistor, and THE correct resistance is needed to bypass the theft deterrent system.

Sep 04, 2009 | 1990 Chevrolet Camaro

1 Answer

88 Camaro bogs when accelerating.

the fuel pressure regulator is not getting enough vacuum,its located under the plenum attached to the fuel rails,its a little round thing with a vacuum line on it.

Jun 04, 2009 | 1988 Chevrolet Camaro

Not finding what you are looking for?
2011 Chevrolet Camaro Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides