Question about 2001 Ford Explorer Sport

Open Question

How to replace the body mount bushings on a 2001 Ford Explorer Sport

Need to know if anyone knows how to change the body mount bushings on a 2001 Ford Explorer Sport? If so, please let me know the procedure.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 508 Answers

SOURCE: How to replace '96 Ford Explorer driver side exterior door handle

You will need to remove the door panel to gain access to the handle. Roll the window up or down as needed to get to the nuts that attach the handle to the door. You will also need to remove a rod the goes to the door lock. You will see the rod after the door panel is removed. Good luck.

Posted on Feb 18, 2009

Ad
chuck943
  • 783 Answers

SOURCE: 2007 FORD EXPLORER SPORT TRAC 4X4 Change oil light on

Press and hold the SELECT/RESET
control switch to select SYSTEM
CHECK when “SYSTEM CHECK /
HOLD RESET” is displayed in the
message center. Selecting this
function from the SETUP MENU
causes the message center to cycle through each of the systems being
monitored. For each of the monitored systems, the message center will
indicate either an OK message or a warning message for two seconds.
Pressing the SELECT/RESET control switch cycles the message center
through each of the systems being monitored.

The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL LIFE RESET
2. CHARGING SYSTEM
3. WASHER FLUID
4. DOOR AJAR
5. EXTERIOR LAMP
6. BRAKE SYSTEM
7. PARK BRAKE
8. MILES TO EMPTY
9. FUEL LEVEL LOW (will only display if 50 miles or less to empty)
To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
following:
1. Enter SYSTEM CHECK to display
“OIL XXX% RESET IF NEW”.
2. Press SELECT/RESET control
switch to display “HOLD RESET IF
NEW OIL”.
3. Press and hold the
SELECT/RESET control switch for
more than 2 seconds. Oil life is set
to 100% and “OIL CHANGE SET TO
100%” is displayed.

Posted on Apr 02, 2009

ourhowse
  • 2007 Answers

SOURCE: how do I replace starter on 2001 Ford Explorer sport trac

Disconnect negative battery cable, remove starter bolts, pull starter out and down to remove connections. Pay attention to how they are situated. Attach connections to new starter exactly the same way, install, and re-connect your battery cable, and you should be off!

Posted on May 15, 2009

  • 104 Answers

SOURCE: where is the location of a 2001 ford explorer sport starter?

Follow the heavy positive battery wire which is connected to the starter; starter is bolted to the bottom back of engine.

Posted on Jun 18, 2009

  • 65 Answers

SOURCE: need fuse panel diagram for 2001 ford explorer

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

free from ford

Posted on Jul 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix my headlights


Search Results

    Explorer Headlight Problem and Interior Stuff - YouTube

    ? 10:53
    https://www.youtube.com/watch?v=f1j-H1dGT4o
    Jan 1, 2011 - Uploaded by justhes
    Explorer Headlight Problem and Interior Stuff ... Thank's to your movie I fix my car. .... 2001 Ford F150 Headlight Switch Replacement - Duration: 5:05. Jon Olson 10,273 views. 5:05. 2003 Ford F-150 4X4 Repair Part #3 The GEM Module ... EXCLUSIVE: 2016 Ford Explorer Sport with Mark Mills at Athens ...

    Replace 2001-2005 Ford Explorer Headlight / Bulb, How to ...

    ? 4:49
    https://www.youtube.com/watch?v=cQJrO0L_tSM
    Sep 16, 2013 - Uploaded by Go-Parts
    Replace 2001-2005 Ford Explorer Headlight / Bulb, How to Change Install ... How To Install Replace Headlight Ford Explorer Sport Trac 01-05 ...

    How To Install Replace Headlight Ford Explorer Sport Trac ...

    ? 4:28
    https://www.youtube.com/watch?v=NzMVcCsZ860
    May 11, 2010 - Uploaded by 1A Auto Parts
    How To Install Replace Headlight Ford Explorer Sport Trac 01-05 1AAuto.com .... I did this on my wifes 2003 Explorer only difference was the screw was a ... Replace 2001-2005 Ford Explorer Headlight / Bulb, How to Change ...

    2001 Ford F150 Headlight Switch Replacement - YouTube

    ? 5:05
    https://www.youtube.com/watch?v=l84h2PUHS0E
    Mar 1, 2014 - Uploaded by Jon Olson
    Headlamp Switch was purchased through Auto Parts Warehouse: ... to help me with my 2001 Ford Explorer Sport-HeadlightSwitch, but the .... Ford F150 Explorer 2000 2001 2002 Overhead Console Repair - Duration: 6:38.




Jan 10, 2016 | 2001 Ford Explorer Sport

1 Answer

How to repalced bad cv axle on 2001 explorer sport


get a Haynes repair manual,it will show you everything you need to know,its not an easy job

Mar 03, 2013 | 2001 Ford Explorer Sport

1 Answer

Which fuse 2001 ford explorer sport trac


The one that says instrument panel,check those fuses.

Feb 25, 2013 | 2001 Ford Explorer Sport Trac

1 Answer

Need to know how to remove fuel pump on a 2001 ford sport track


Go to this link. http://www.mysporttrac.com/MySportTrac/projects/FuelPumpReplacement.pdf

Oct 12, 2012 | 2001 Ford Explorer Sport Trac

1 Answer

I replaced valve body gasket on my 2001 ford explorer now it wont go in gear at all what could be the problem


Check your transmission fluid level. If you changed out the gasket more than likely you had to drain alot of fluid. Most people say 7-8 quarts but it takes more than that.

May 04, 2012 | 2001 Ford Explorer Sport

1 Answer

How do i replace the bushings on my windshield wipers on a ford explorer? Drivers side wipers bushing is wore and needs replacing. having a hard time putting the arm and new bushing back on the ball of the...


the parts in order for this wiper system has 4 items involved.
the wiper motor, the wiper transmission, the wiper arms, and the wiper blades
if the bushing is too hard to install its destroyed and it will jamb up on you
replace the transmission unit is the best option to do

Mar 06, 2010 | 2001 Ford Explorer Sport

1 Answer

How to to change body mounts on 2002 explorer sport ,and where to buy them?


First, count how many mounts there are. Then make your way to your local Auto Parts store, or search online. You may be able to buy a complete set, but if not, you know how many you need. Usually they are all the same P/N, but some cars might have different size mounts in the front than compared to the back. Get your tools together and be prepared to pull up some carpet and seats to get access to the bolt heads, usually under a rubber grommet/cap. Its a good idea to soak the nuts/bolts down with a good penetrating oil. If you live in the rust belt, you may need to buy new hardware (nuts and bolts) as your old ones will probably be seized. Be prepared with a grinder or impact wrench in case the old bolts are hard to remove. Work one side at a time. Remove all the nuts on one side. Use a bottle jack and a piece of wood (to spread the load) and jack up the body (not the frame) near the mount. Slip out the bolt (usually from the top) and pull out the old rubber. Insert the new rubber with sleeve (if used) and repeat for each mount. Wait to install the nuts until the whole side is done. Torque will be somewhere from 40 to 75ft/lbs. Consult a manual or call the dealer to find out torques. Do the next guy a favor and use a bit of anti-seize on the bolts and threads when installing! Rubber is softer and will ride smoother. Poly bushings will last forever, but will transmit more road noise and vibrations. Have fun.

Dec 27, 2009 | 2002 Ford Explorer Sport

1 Answer

Where is 2001 Ford Explorer overdrive solenoid located?


inside the transmission, mounted on the transmission shift control valve body. There are four solenoids located on this valve body, it is difficult to explain which one does what, you can measure each one with an OHM meter, the OHM valve is hard to specify, but there should be an OHM value, it should not be shorted or open, hope this helps, let me know

Nov 20, 2009 | 2001 Ford Explorer Sport

1 Answer

NOISY RIDE IN REAR, 2001 EXPLORER SPORT


I don't know why you would replace the bar itself unless it is damaged. There are bushings that the bar is mounted on that are fairly easy to replace. As well, links on the ends that tend to wear. Any auto parts store can sell you these fairly cheaply.

Mar 14, 2009 | 2001 Ford Explorer Sport

1 Answer

Fuse keeps blowing in 2001 ford explorer sport.


ok put in a 20 if that blows put in a 25 do NOT go over 25A fuse if it keeps going out let me know

Dec 27, 2008 | 2001 Ford Explorer Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...