Question about 2004 Hyundai Santa Fe
Srs wiring diagram
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.
Posted on Apr 06, 2009
Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.
Posted on May 16, 2009
This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.
Posted on May 22, 2009
Please follow the steps to change the fuel filter. You would need to remove the left rear seat (four 14mm bolts). I think you'll need to finish cutting through the tabs on the carpet to be able to lift up the carpet. Then remove the access cover. You can then remove the fuel pump from the top of the tank.
Thank you for contacting Fixya.com
Posted on Jul 26, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
Tips for a great answer:
Jun 17, 2016 | 2008 Hyundai Santa Fe
May 11, 2016 | Hyundai Cars & Trucks
Oct 29, 2014 | 2004 Hyundai Santa Fe
Jun 03, 2011 | 2004 Hyundai Santa Fe
Apr 23, 2010 | 2004 Hyundai Santa Fe
Sep 02, 2009 | 2004 Hyundai Santa Fe
Aug 22, 2009 | 2004 Hyundai Santa Fe
Jun 29, 2009 | 2004 Hyundai Santa Fe
Jun 06, 2009 | 2004 Hyundai Santa Fe
May 16, 2009 | 2004 Hyundai Santa Fe
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: