Question about Saab 9 7X

1 Answer

P0128 Can I still drive it with this check engine code?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saab Master
  • 1,121 Answers

Old post, but YES you can still drive it. Replace your thermostat will fix this problem. With this code, your engine isn't getting up to temp within a certain time frame is all. I've cleared that code so many times, until I finally replaced the thermostat. You might as well replace the temperature sensor while you're in there. Some years it's right above the thermostat, others it's on the passenger side, way in the back of the engine.

Posted on Feb 28, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 77 Answers

SOURCE: Error Code P0128 service engine light comes on intermediately

replace the thermostat.

Posted on Apr 30, 2009

motor1258
  • 6674 Answers

SOURCE: P0128 Code for a 2004 trailblazer with service engine soon light

Replacing it is the only fix. Sounds like it may be sticking open slightly.

Posted on May 27, 2009

  • 155 Answers

SOURCE: 2003 Toyota Avalon error code p0128 thermostat location

Follow your upper radiator hose to the motor. It will be clamped to your thermostat housing. Unscrew the 2 or 3 bolts holdng the housing down and your thermostat will be right there. Replace thermo. and gasket then reaffix housing and hose. LET MOTOR COOL DOWN BEFORE CHANGING and hour+!!

Posted on Jun 12, 2009

  • 14036 Answers

SOURCE: What can keep causing Check engine code P0128

CODE P0128- THERMOSTAT MALFUNCTION. POSSIBLE CAUSES 1. ECT SENSOR IS OUT OF CALIBRATION. 2. CHECK THE OPERATION OF THE THERMOSTAT IT MAY BE STUCK OPEN.3.INSPECT FOR LOW COOLANT LEVEL OR FOR AN INCORRECT COOLANT MIXTURE.

Posted on Jan 06, 2010

  • 97 Answers

SOURCE: 2008 Tucson with engine light on - ran service

coolant temp out of range.

Posted on Mar 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does error code p0128 mean


This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat

Read more at: http://www.obd-codes.com/p0128
Copyright © OBD-Codes.com

Feb 04, 2015 | Cars & Trucks

1 Answer

2004 trailblazer code po128


P0128:
P0128 OBD-II Trouble Code
Technical DescriptionCoolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

What does that mean?This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

CausesA code P0128 may mean that one or more of the following has happened:

Low engine coolant level .
Leaking or stuck open thermostat .
Faulty cooling fan (running too much) .
Faulty coolant temperature (ECT) sensor.
Faulty intake air temperature (IAT) sensor .Here's a link on replacing your thermostat.

Feb 06, 2013 | 2004 Chevrolet TrailBlazer

2 Answers

Eror code: PO128 Code


This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125
In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.
Symptoms You will likely not notice any drivability problems other than the MIL illumination.
Causes A code P0128 may mean that one or more of the following has happened:
  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor
Possible Solutions Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
  • Verify coolant strength & level
  • Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
  • Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
  • Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
  • If the above items check out good, replace the thermostat
  • If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code
Other ECT sensor and circuit related DTCs: P0115, P0116, P0117, P0118, P0119, P0125

Feb 08, 2011 | Buick Rendezvous Cars & Trucks

1 Answer

I have a 2004 Chevy Impala. As I was driving home yesterday I had the heater on full blast - temp outside appx. 60. The check engine light came on and I had a P0128 code. Could this be due to keeping...


This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.


A code P0128 may mean that one or more of the following has happened:

  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor

Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:

  • Verify coolant strength & level
  • Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
  • Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
  • Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
  • If the above items check out good, replace the thermostat


REFERENCE: http://www.obd-codes.com/p0128


I hope this helps a bit!

Jan 11, 2011 | 2002 Chevrolet Venture Passanger

1 Answer

Error code po128


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms: You will likely not notice any drivability problems other than the MIL illumination.

Causes: A code P0128 may mean that one or more of the following has happened:
* Low engine coolant level
* Leaking or stuck open thermostat
* Faulty cooling fan (running too much)
* Faulty coolant temperature (ECT) sensor
* Faulty intake air temperature (IAT) sensor

Possible Solutions: Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
* Verify coolant strength & level
* Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
* Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
* Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
* If the above items check out good, replace the thermostat
* If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code


Hope helps (remember to rate this answer).

Jan 07, 2011 | 2002 Chevrolet Venture Passanger

1 Answer

The check engine light goes on and then off. Had Autozone scan code and it read P0420 and P0128. Any ideas what this means?


You don't mention any vehicle specific info, but the codes read as follows:

P0420 - "Catalyst Efficiency Below Threshold (Bank 1)"

P0128 - "Coolant Temp Below Thermostat Regulating Temp"

I'd guess you basic problem is the engine isn't getting hot enough in normal operation.

Try replacing the thermostat. Do be aware that you have to purge the cooling system of any trapped air for proper cooling system function. Some vehicles have 1 or more air bleed screws in the system to aid in this process.

I suspect that if you resolve the P0128 DTC, the other will go away (might have to clear the code and go thru requisite drive cycle.

Jan 02, 2011 | Chevrolet TrailBlazer Cars & Trucks

2 Answers

P0128 coolant temp below thermostat/regulating temp


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms: You will likely not notice any drivability problems other than the MIL illumination.

Causes: A code P0128 may mean that one or more of the following has happened:
* Low engine coolant level
* Leaking or stuck open thermostat
* Faulty cooling fan (running too much)
* Faulty coolant temperature (ECT) sensor
* Faulty intake air temperature (IAT) sensor

Possible Solutions: Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
* Verify coolant strength & level
* Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
* Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
* Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
* If the above items check out good, replace the thermostat
* If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code

Hope helps (remember to rate and comment this).

Sep 27, 2010 | 2006 Dodge Caravan

1 Answer

Dtcdescriptionp0128andrepair


DTC P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

What does that mean?
This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms:
You will likely not notice any drivability problems other than the MIL illumination.

Causes:
A code P0128 may mean that one or more of the following has happened:
* Low engine coolant level
* Leaking or stuck open thermostat
* Faulty cooling fan (running too much)
* Faulty coolant temperature (ECT) sensor
* Faulty intake air temperature (IAT) sensor

Possible Solutions:
Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
* Verify coolant strength & level
* Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
* Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
* Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
* If the above items check out good, replace the thermostat
* If Nissan vehicle, check for a TSB such as this one. The ECM may need to be reprogrammed to correct the P0128 code


Hope helps (remember rated this).

Jul 01, 2010 | 2004 GMC Envoy

3 Answers

What can keep causing Check engine code P0128


CODE P0128- THERMOSTAT MALFUNCTION. POSSIBLE CAUSES 1. ECT SENSOR IS OUT OF CALIBRATION. 2. CHECK THE OPERATION OF THE THERMOSTAT IT MAY BE STUCK OPEN.3.INSPECT FOR LOW COOLANT LEVEL OR FOR AN INCORRECT COOLANT MIXTURE.

Jan 06, 2010 | 2004 Kia Spectra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...