Question about Ford Fusion

Open Question

TAC system stuck closed and system forced idle on a 2008 ford fusion

What can I have done to find out what exactly is the problem if I am getting those codes ?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: my key is stuck in my ford fusion

Bad switch, yeah right.. remove the sleeve around the button. I had a friend make one at a machine shop for super glued it in place not one problem since! Easy fic friend!~! Ford is making a killing off this problem!!!! LOL The other guy must be a service tech!

Posted on Jul 06, 2009

Ad
  • 1779 Answers

SOURCE: 2008 ford fusion alerts on dashboard

You can download a free owners manual from this site, it will identify all the dashboard alerts:
https://www.fleet.ford.com/maintenance/owners_manuals/results.asp

Posted on Aug 13, 2009

  • 3 Answers

SOURCE: 2005 Ford F 150 throws p2104 tac system forced

Remove the throttle body and clean the carbon off the throttle plate being carefull not to harm any coating that may be applied from the manf. I use P.B Blaster and a piece of scotch brite pad. spray pleanty P.B on the pad after words clean with a soft cloth. Disconnect the battery to completly clear the code.

Posted on Feb 19, 2010

  • 4875 Answers

SOURCE: how do i remove radio from 2008 ford fusion radio ...

http://www.fitaudio.com/index.php?CategoryID=13

Posted on May 26, 2010

ZJLimited
  • 17970 Answers

SOURCE: What is the best way

P2112 - Throttle Actuator Control (TAC) System - Stuck Closed.

The fix is a new throttle body assembly.

Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford five hundred replaced battery went into engine failsafe mode n will only idle no throttle response I replaced throttle body assembly just sits and idles


try using the scan tool to reset the ECM program
code p 2104 refers to throttle actuator control(TAC) system---forced idle mode ===causes ---wiring--TAC motor ---APP ensor--ECM
code p 2112 refers to throttle control actuatorTAC system---actuator stuck closed ===causes ---throttle body, throttle valve tight/ sticking
or TAC system--circuit malfunction===causes wiring short to positive ---short to ground ---throttle position sensor--- ECM

Feb 21, 2016 | Ford Cars & Trucks

1 Answer

Need to know what code 2110 ford fusion 2006 se


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection help.png Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mV0SayWu

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

What does 2110 code on 2006 ford fusion mean


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection > Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mUz73ACP

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

Start and dies, codes p061f, p2106,p2104,p2111


code p2106 refers to throttle actuator control (TAC) system--limited power mode===causes ---wiring---TAC motor---APP sensor---ECM

code o2104 refers to TAQC systems ---forced idle mode===causes wiring---TAC motor--APP sensor--ECM

code p2111 refers to TAC system --actuator stuck open ==causes ---throttle body--throttle valve tight/ sticking

code p2111 also refers to TAC system --circuit malfunction==causes wiring---short to positive--short to ground---TP sensor---ECM

code p2111 also has a 3rd section---brake vacuum---implausible signal===causes---wiring---vacuum sensor--mechanical fault

Dec 21, 2013 | 2005 Ford Crown Victoria

2 Answers

I got codes P 2104 & P 2112 - what is this and how can it be sloved?


P2104 - Throttle Actuator Control (TAC) System - Forced Idle
P2112 - Throttle Actuator Control (TAC) System - Stuck Closed.
P2104 was set because the pcm had to step in to set the idle. The TAC system is in the failure mode effects management (FMEM) mode of forced idle. P2104 is just an informative code, set because of P2112. P2112 possible causes: Binding throttle body, stuck closed or
Damaged PCM

tell your dealer technician to follow pinpoint test DV1 in the workshop manual. (but also to reference test QE1) DV1 deals with him/her checking the throttle position voltages, if these voltages are not within spec, proceeding with checking for obstructions in the throttle body, then if this passes, he/she checks the wiring to the TAC assembly. there are many steps in this test and since the truck isnt here i can't tell you where the test will go (throttle body assembly, PCM, etc.) most likely it will be the throttle position sensor which is a part of the throttle body assembly or a simple connector coming unplugged or wiring being cut, but once again since i dont have the truck in front of me i can't be 100% sure. good luck. hope this helps.

Aug 18, 2011 | Ford Fusion Cars & Trucks

3 Answers

Can anyone tell me what does the following codes mean for my 2006 Ford F-150 Pick up 4.6 litre The codes are as follows: P210406, P2111, P2112, and P2135.


code p2111 throttle actuator control system actuator stuck open. throttle actuator control system circuit malfunction. brake vacuum implausible signal. code p2112 throttle actuator control system actuator stuck closed.throttle actuator control system circuit malfunction. code p2135 accelerator pedal position sensor switch a b voltage correlation. throttle position sensor switch a b voltage correlation. electronic throttle position sensor switch 1 implausible signal. did not see code p210406 that code too long.

Apr 15, 2011 | Ford F-150 Cars & Trucks

1 Answer

2005 F150 5.4 Cuts off when driving at constant speed and show "Engine Fail Safe Mode" on display. It will crank back up and run for several hundred miles before doing it again. P2112 Throttle Air...


unfortunately no ! Your best bet take it to the dealer . The P0420 always ends up being the catalytic converter ! P2104 isn't throttle air control . P2112 - Throttle Actuator Control (TAC) System - Stuck Closed. Description: This powertrain control module (PCM) fault status indicates the throttle plate is at a lower angle than commanded. Possible Causes:
  • Binding throttle body, stuck closed.
  • Damaged PCM.
Diagnostic Aids: Application Key On Engine Off Key On Engine Running Continuous Memory All GO to DV1
P2104 - Throttle Actuator Control (TAC) System - Forced Idle Description: The TAC system is in the failure mode effects management (FMEM) mode of forced idle. Possible Causes:
  • Open or short in multiple accelerator pedal position (APP) sensor circuits.
  • Damaged APP sensor.
  • Damaged powertrain control module (PCM).
Diagnostic Aids: This DTC is an informational DTC and can be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to QE1
P0506 - Idle Air Control (IAC) System RPM Lower Than Expected For Vehicles With Electronic Throttle Control (ETC) Description: This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. Possible Causes:
  • Air intake restriction.
  • Exhaust restriction.
  • Engine mechanical fault.
  • Damaged electronic throttle body (ETB).
  • Damaged PCM.
Diagnostic Aids: This DTC is informational only and it may be accompanied by other DTCs. Diagnose other DTCs first. If other DTCs are not present inspect the intake air system for air restrictions and damage. If no concerns are present, clear the DTC and retest. For All Others Description: This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. Possible Causes:
  • IAC circuit open.
  • Air inlet is plugged.
  • B+ or VPWR to IAC solenoid open.
  • Damaged or incorrect IAC valve.
  • IAC valve stuck closed.
  • VPWR to IAC solenoid open.
  • IAC circuit shorted to PWR.
Diagnostic Aids: Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve. Application Key On Engine Off Key On Engine Running Continuous Memory Vehicles With Electronic Throttle Control (ETC) Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. All others GO to KE1

Jul 03, 2017 | 2005 Ford F-150

1 Answer

2006 ford f150 codes 2104 and 2112


2104 Throttle Actuator Control (TAC) System - Forced Idle
2112
Throttle Actuator Control (TAC) System - Stuck Closed

sounds like you need a throttle body
the pcm is seeing the
throttle plate is at a lower angle than commanded

Oct 17, 2009 | 2006 Ford F-150

5 Answers

Engine goes to idle while driving


P2104 Throttle Actuator Control System - Forced Idle
P2106 Throttle Actuator Control System - Forced Limited Power
P2111 Throttle Actuator Control System - Stuck Open
P2112 Throttle Actuator Control System - Stuck Closed
P2135 Throttle/Pedal Position Sensor/Switch “A” /"B" Voltage Correlation
I looked it up and I will give you a web site I got it from http://www.f150online.com/forums/v8-engines/280570-p2104-p2106-p2111-p2112-p2135.html I hope this helps

May 25, 2009 | 2004 Ford Explorer

2 Answers

My check engine light has come on for my 2006 Ford Fusion and 3 codes came up...P0010, P2104, and P2112. Any ideas what these mean?


Fuel and Air Metering and Auxiliary Emission Controls P2104 Throttle Actuator Control System - Forced Idle
P2112 Throttle Actuator Control System - Stuck Closed
If it's not the pedal, it has to be throttle body, senor or harness related.

Jan 16, 2009 | 2006 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...