Question about Nissan 200

Open Question

Nissan np200 problems

Why is there no power

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pal03246
  • 705 Answers

SOURCE: Np200

if the engine light doesn't light up, when the key is turned on to accessories position, along with other lights, that means that the cars computer is not turned on, powered up. that's why its not starting. the car is not seeing the computer. could be blown fuse, ground side for computer is broken, could be harness issue and it could be the computer itself. start with checking fuses first. check all of them. you may find one burned.

Posted on Jul 01, 2013

adrian51037
  • 1 Answer

SOURCE: Np200

I've got a np200 not 3 months yet , drove 6584km, drove the other day and dash caught on fire ,they say the radio is at fault , I say they fitted it, they stumped. now they looking for a reason why they can replace or repair.

Posted on Jan 19, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan np200 keeps cutting power, I don't know there is a problem with petrol supply.


U need to do check ur cable plug or can be ur air intake system is no balance with ur fuel.

May 31, 2016 | Nissan Cars & Trucks

1 Answer

Fitted new clutch kit on a Nissan np200 1.6 and it drove for 3 days then the clutch got spongy again #any specific way to bleed the system on this car ?


Nissans have a problem with bleeding clutches as would normally be done
I suggest that you take it to a brake shop and have it bleed using a pressure bleeder

Mar 14, 2015 | Nissan Cars & Trucks

1 Answer

Nissan NP200 started jerking whilst driving and cutting out completely and not wanting to start. If you wait a while, it starts as normal, but does the same thing a few kms later.


#1 if your engine light is on, you need to go to autozone and have it scanned. if you get code po420 or po430, your cat. converter is bad. If this is the code also should change spark plugs. Misfire causes cat. converter to melt inside.

Mar 09, 2015 | Nissan Pickup Cars & Trucks

1 Answer

Nissan Np200 1.6 8 valve Cam belt Timing settings


need the torque setting for head gasket replacement. nissan np200 1.6 8 valve

Jul 31, 2014 | Cars & Trucks

1 Answer

Replace a serpentine belt on a Nissan NP200


Nissan NP200 Using a short socket of appropriate metric value, and a pry bar; Push the pry bar toward the firewall to loosen the tension on the belt. It's not that hard once you buck the initial spiral spring pressure of the tensionor. I have even pryed against the tensionor with a blunt heavy bar and moved it enough to free a Belt.

Oct 03, 2013 | Nissan Cars & Trucks

2 Answers

Np200


if the engine light doesn't light up, when the key is turned on to accessories position, along with other lights, that means that the cars computer is not turned on, powered up. that's why its not starting. the car is not seeing the computer. could be blown fuse, ground side for computer is broken, could be harness issue and it could be the computer itself. start with checking fuses first. check all of them. you may find one burned.

Jul 01, 2013 | Nissan Cars & Trucks

1 Answer

Passenger door rattle on np200 nissan ldv


Can anybody help ,i have the same prob with my 2013 np200 ,how did this guy fix his rattle?

Jun 29, 2013 | Cars & Trucks

1 Answer

Could you please send me the torque setting for a Nissan NP200, 2009 model. The head has been done and we need the torque setting in order to do replace the head. Its a 1.68 Valve.


need the torque setting Haley, Check the attached links,instruction and guides down load pdf. torque settings and get yourself a manual. Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

Nissan Repair Manuals

Jan 20, 2012 | Nissan Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...