Question about 2005 GMC Envoy
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
one, five, three, six, two, four
The plastic intake should have this sequence molded into it somewhere, and even the corresponding cylinder numbers in front of their respective holes. Have fun, and thanks for posting on Fixya.com
Posted on Mar 20, 2009
SOURCE: firing order for a 1986 gmc s15
To avoid confusion, ALWAYS replace spark plug wires one at a time.
The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.
Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise
Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise
Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise
I hope help you with this (remember rated this help) Good luck.
Posted on Oct 05, 2009
Tips for a great answer:
Aug 20, 2016 | GMC Sonoma Cars & Trucks
Jan 06, 2016 | GMC Cars & Trucks
Jun 07, 2014 | 2006 Dodge Grand Caravan
Jul 21, 2011 | 2003 GMC Envoy
Jun 02, 2011 | 1993 GMC Sierra
Apr 18, 2010 | GMC Sierra 2500 Cars & Trucks
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: