Question about 1996 Toyota 4Runner

Open Question

Head bolt torque on a toyota land cruiser 1991 4.0

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 94 Answers

SOURCE: 2004 Toyota Land cruiser key programming

you need to take it to the dealer so they can program the key to the car which requires there software. hope this helps

Posted on Mar 09, 2009

  • 701 Answers

SOURCE: torque specs for toyota tercel

Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Posted on Apr 15, 2009

  • 4793 Answers

SOURCE: 1991 Land Cruiser owner's &/or repair manual

try ebay.....

Posted on Feb 11, 2010

  • 1 Answer

SOURCE: what are torque specifications for toyota 3a-u

70 ft/lbs

Posted on Nov 13, 2010

Suzman
  • 642 Answers

SOURCE: need to torque cylinder head on a toyota land

Refer to the diagram and torque bolts in sequence as shown in 3 passes. Bolt thread should be lightly oiled. Bolt holes clean of dirt.

suzman_49.jpg
1st pass : 39 N.m. (29ft lb)
Make a mark on the bolt with white-out/chalk or similar in the forward facing edge of the bolt.(see diagram)

suzman_56.jpg
2nd pass : turn bolt through 90 degrees
3rd pass : turn bolt through a further 90 degrees.
Using a mark on the bolt makes it easier to keep track of where in the sequence you are.

Posted on Dec 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 80 series GLX auto landcruiser 1996 need head bolt torque a nd cam shaft torque settings


Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98
Engine code: 1FZ-FE, 1HD.
Stage 1: 20 Nm (Start tightening bolts from center to outwards)
Stage 2: 39 Nm
Stage 3: Rotate each bolt by 90 Degrees.
Stage 4: Further rotate each bolt by 90 Degrees

Nov 22, 2014 | 1996 Toyota Land Cruiser

1 Answer

How many stages and what neuton meters are there for tightening head bolts?


Read this:

http://www.scribd.com/doc/52122956/Toyota-Landcruiser-Engine-Manual-2H-12HT

Aug 02, 2014 | Toyota LandCruiser Cars & Trucks

1 Answer

Fly wheel torque


I never worry about torqueing them. Just do them up very tight with a power bar and socket. You'll need to stop the motor from turning either with a bar jammed into the ring gear or a socket and bar on the front pulley nut. I use the bar in the ring gear method.

Apr 02, 2014 | 1991 Toyota Land Cruiser

1 Answer

I need to know what torque i have to use to tight head bolt


-difference car with different torque. You need to look in its repair manual.

Good Luck

Mai

Nov 12, 2013 | 2006 Toyota Land Cruiser

1 Answer

Land cruiser head bolt torque


27 FT LBS THEN GO BACK AND TURN 180 DEGREES MORE

Nov 12, 2013 | Cars & Trucks

1 Answer

I have 1991 toyota land cruiser where's the fuel


I have always known the fuel filter to be attached to the fire wall inside the engine compartment at the rear of the engine . It will be a tin can about jam tin size with 2 or 3 pipes in the head piece.

Sep 22, 2013 | Cars & Trucks

1 Answer

I need the torque settings for head bolts on a land cruiser ,it is a 1997


Hope this helps. Please dont forget to rate my advise. Thanks
Lefty64



0900c152802619a6.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. New head bolts are strongly recommended. Tighten the head bolts down uniformly using this sequence in several passes2RZ-FE and 3RZ-FE engines
  1. Tighten all bolts to 29 ft. lbs. (39 Nm).
  2. Mark the front of the bolt with paint and retighten bolts 90° in the proper sequence.
  3. Retighten an additional 90°. Check that the painted mark is now facing rearward.

Apr 09, 2009 | 1992 Toyota Land Cruiser

Not finding what you are looking for?
1996 Toyota 4Runner Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...