Question about 2009 Mitsubishi Pajero 3.2

Open Question

Replace fan belt nt pajero - 2009 Mitsubishi Pajero 3.2

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to replace fan belt on a Mitsubishi pajero

  1. 1 Open the bonnet of the Pajero, and turn the bolt on the centre of the tension pulley with a socket wrench two full rotations. The tension pulley is the pulley directly behind the fan in the upper portion of the front of the engine.
  2. 2 Loosen the adjuster bolt on the tension pulley bracket. This bolt is on the left-hand side, situated in a long horizontal groove.
  3. 3 Slip the fan belt off of the engine. Draw a diagram of the path of the fan belt if the factory printed sticker diagram is no longer in the front of your engine on your Pajero.
  4. 4 Insert the new fan belt, winding it through the various pulleys according to your diagram. Put it on the tensioner pulley last.
  5. 5 Place the tension belt tool on the tension pulley bolt and pull until the slack in the belt is gone. When there is no slack, keep the pressure on the pulley, and tighten the adjuster bolt with the wrench. Tighten the lock bolt on the pulley.

Jun 17, 2015 | 2006 Mitsubishi Pajero 3.2

1 Answer

How do I replace the fan belt?

Are you a DIYer? I recommend a repair manual from auto parts store. It is easy to refer to, and you will want it next time anyway.

Jun 07, 2015 | 1992 Mitsubishi Pajero

1 Answer

At,battery and temp lights come on when idling and dim when revving

Bad /loose fan belt, bad altinator, bad ground wire to the battery, bad battery, Take the car to an auto store to check these systems before you get stuck.

Aug 03, 2014 | 1994 Mitsubishi Pajero

1 Answer

Mitsubshi pajero replace front crank seal housing

Remove radiator fan,radiator, belts, pulleys, including the main pulley connected to the crankshaft. The work required is almost similar to replacing the timing belt/chain.

May 13, 2014 | 1997 Mitsubishi Pajero

1 Answer

Cannot get the ipod to connect and play in my pajero vrx-nt stereo system

I purchaced a CONNEXIA 3.5 stereo plug with 2RCA plugs from JB HIFI product No. X05139 for #9.95. Plug in to RCA sockets in glove box then find AUX[ hold disc button for more than 2 sec]. Works great , perfect sound.

Feb 14, 2013 | 2011 Mitsubishi Pajero 3.2

1 Answer

A diagram of how to fit serpentine belt to 2002 np pajero

can someone post diagram for fan belt of NM PAJERO 2000, 3.5 auto

Jun 18, 2012 | Mitsubishi Pajero Cars & Trucks

1 Answer

How do i tighten a pajero fan belt???

Normally the slack can be tightened by releasing the idler pulley and using a lever to hold back the belt to the desired level, the bolts can be tightened once again. however if this has happened once before it will be wise to get the belt replaced. Get a helping hand when the belt has to be held back.

Jan 07, 2012 | Mitsubishi Pajero Cars & Trucks

1 Answer

1991 Mitzi Pajero 2.5L Diesel has lost breaks and power steering

take the bolt out and put some locktite on the thread ,then tighten it up again with the flywheel locked up the best you can ,ie-- with a big screwdriver jammed into the ringear

Aug 30, 2009 | 1991 Mitsubishi 3000GT

Not finding what you are looking for?
2009 Mitsubishi Pajero 3.2 Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides