Question about Dodge Neon

Open Question

Codes po704 throwing codes po700 & po704 codes,transmission shifts ok ?

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bigc73542
  • 108 Answers

SOURCE: trns shift problem

On chrysler product vehicles that use the electrical solonoids inside the trans oil pan can usually just be removed and cleaned and they will usually function correctly again. They have a tendency to get laquered up and stick if the trans fluid has not been serviced regurarly. This happenes from the neon all the way up to the dodge 3/4 ton pickups with the gasoline engines.

Posted on May 04, 2009

skychief2001
  • 21873 Answers

SOURCE: 1997 getting code P1776 & PO700 What does this mean

The code 700 is a notice that there is a problem with the trans control module, and code 1776 could be a problem with the low-reverse solenoid inside the trans. Code 1776 can trigger the code 700.
The solenoid would need to be tested.

Posted on Sep 04, 2012

teds_repairs
  • 2101 Answers

SOURCE: i rebuilt a 41te transmission now i have codes po605/po700 does not want to shift

that is the transmission control module is not reading. did you replace it. it is in the front of the transmission

Posted on Nov 12, 2012

Hobbit_who
  • 2044 Answers

SOURCE: 2004 jeep liberty. code po750 and po700. were is the shift solenoid at and how to change

The Shift Solenoids are inside the PAN, make sure you clean the Orifice before installing the new ones

Posted on Apr 10, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the p0891 code?


My book that came with my OBD II goes to PO849 then skips to PO1103. I can tell you that PO700 is : Transmission Control System Malfunction

Apr 14, 2013 | 2005 Chrysler PT Cruiser

1 Answer

2004 jeep liberty. code po750 and po700. were is the shift solenoid at and how to change


The Shift Solenoids are inside the PAN, make sure you clean the Orifice before installing the new ones

Apr 10, 2013 | Jeep Liberty Cars & Trucks

1 Answer

How to fix po700 & po755 related codes


IT'S YOUR SHIFT SOLENOID LOCATED IN THE PAN UNDER FILTER WITH 2 WIRES GOING TO IT NEEDS REPLACED OR YOU WILL RUIN YOUR TRANSMISSION THE SOLENOID CODE IS PO755 YOUR PO700 IS WHAT MAKES YOUR LIGHT LUMINATE UNTIL PROBLEM IS RESOLVED

Jan 03, 2013 | 2005 Dodge Ram 1500

1 Answer

P1782 po700 codes what are they?


2000 caravan with codes p1782 and po700,this is transmission codes, i will tell you this, with out a good scan tool to check the problem correctly you will be just throwing money at it.

this may be due to a bad shift solenoid pack or wiring or internal transmission problems. sorry to say but these transmission are junk.
I would have a transmission shop or dealer check it, maybe the dealer unless you know a good transmission shop that will not try to sell you a rebuilt ******.

Dec 08, 2012 | 2000 Dodge Grand Caravan

1 Answer

I rebuilt a 41te transmission now i have codes po605/po700 does not want to shift


that is the transmission control module is not reading. did you replace it. it is in the front of the transmission

Nov 11, 2012 | 2001 Dodge Caravan

1 Answer

I have a doge gran carvan 2000 or 2001 3.3v6 i have cods coming up as falows p1775 p0732 p1788 p0700 p0456 can eny buty tell me wher to start got it today at an auction dont know much


CODE P1775 - A / T OR AUTOMATIC TRANSMISSION SWITCH LATCHED IN TCC POSITION. CODE PO732 - A / T ADDITIONAL GEAR RATIO ERROR IN SECOND GEAR. CODE PO700 - AUTOMATIC TRANSMISSION CONTROL SYSTEM MALFUNCTION CODE PO456 - EVAP SYSTEM SMALL LEAK DETECTED.POSSIBLE CAUSE FUEL TANK CAP LOOSE OR DAMAGED , SMALL LEAK PRESENT SOMEWHERE IN EVAP SYSTEM. I DID NOT SEE CODE P1788. BUT CODES P1775, P0732 , PO700 , YOU HAVE INTERNAL TRANSMISSION PROBLEMS TRANSMISSION SHOP HAS TO HOOK DIAGNOSTIC EQUIPMENT TO CHECK TRANSMISSION PRESSURE SOLENOIDS AND SHIFT SOLENOIDS. TRANSMISSION VALVE BODY HAS MANY SOLENOIDS PRESSURE SWITCH AND SENSORS COST TOO MUCH REPLACE THEM ALL LET GARAGE SCANNED TRANSMISSION BE MUCH CHEAPER.

Nov 07, 2010 | Dodge Caravan Cars & Trucks

1 Answer

Transmission problems???


The electronic shift solenoids are serviced as an assembly that is quite easy to replace. Your fault codes are all related to shift solenoid faults.

Feb 24, 2010 | 2000 Dodge Caravan

2 Answers

PO700 PO740, check engine light on. Run a test on


PO700 is a code telling you there are codes in the TCM of some late model cars where the Transmission control module has lost connection to the PCM the vehicals main computer , And basically it happens when the TCM has a issue within itself or the transmission that sets a code and it sends a request for the PCM to illuminate the SES or CHECK engine light.
PO740 is a chrystler specific code that involves your Tourqe Converter Clutch Circuit (specifically The TCC solenoid) this code if not repaired quickly could cause major transmission problems....slipping out of gear....not shifting from first to second properly and just all around trans problems...eventually leading to no shifting at all...I highly recommend fixing it soon.

Feb 22, 2010 | 2001 Dodge Caravan

3 Answers

2005 pacifica p0700 touble code problem


The P0700 refers to a Transmission Control System Malfunction. It's a generic code in that it's a warning to have your transmission computer scanned to get the precise codes in order to diagnose the problem further. Apparently, transmission issues are common in all Chrysler products in the mid 2000's . Have the car scanned for a more specific code and post back your results for further instruction.

Oct 28, 2009 | 2005 Chrysler Pacifica

1 Answer

My 1998 dodge avenger automatic will not shift out of second what will cause this the computer i hooked it up to just gave me these codes po733, po700, po734 the motor is a 2.5


code po700 is what the pcm gets from the tcm when there is a problem with the transmission-anywhere from fluid level, sensor, solenoid, tcm problem, or mechanical problem.
the situation you have with the car being in 2nd gear is called "limp-in" mode. so you can limp-in to a repair center.

Mar 02, 2009 | 1998 Dodge Avenger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...