Question about 2000 Pontiac Bonneville

2 Answers

Need to reset blent door actuater on 2000 ponyiac bonnevile

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Pontiac Master
  • 373 Answers

I never heard about a need to "reset" a blend door.
Are you trying to fix a condition where the passenger side blows hot or cold, but opposite the temperature of the driver side?

If a/c, you probably need some Freon recharge. If heat, check your coolant level.
My 2005 Bonneville had this problem with the a/c. I looked at the blend doors for hours, before getting a clue about the low Freon.

Posted on Sep 15, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 189 Answers

Yes, if you are working a/c and pass is colder than drivers, you are low on refrigerant. have it topped up to good pressure

Posted on Dec 08, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Air blend actuator 2000 ford explorer is not working?


First, insure you do not have a vacuum leak or bad vacuum check valve. If this is all good, you may have to change actuator and every model has a different way to access this--some require dash removal. If you must do this, get a shop manual as the air bags CAN BE VERY DANGEROUS!

Mar 28, 2016 | 2000 Ford Explorer Eddie Bauer

1 Answer

How do you remove a blent door actuater from 2001 pontiac bonnevile


I never heard about a need to "reset" or replace a blend door.

If a/c, you probably need some Freon recharge. My 2005 Bonneville had this problem with the a/c. I looked at the blend doors for hours, before getting a clue about the low Freon. You'll probably need to go to the dealer or an a/c specialist to have it checked. It may ony need 1/2 a can of Freon to fix.

Apr 13, 2014 | 2001 Pontiac Bonneville

1 Answer

Cranking several times before our 2000 pontiac bonnevile starts


The fuel pressure regulator has a check valve in it ti keep up fuel pressure when the engine is not running. There is a test port on the regulator to connect a fuel pressure test gauge.

Dec 29, 2012 | 2000 Pontiac Bonneville

1 Answer

L door dose not lock all door locks


This may be due to a bad lock actuator, i will need to ask a few questions first.Can you lock the door by hand using the button? or is the lever stuck?Is the problem that it does not work with the power locks only?
Let me try to answer these, first if the door lock does not work with the power locks then the door lock actuator may be bad, the door panel will need to be removed and test for power at actuator. While inside the door check lock linkage.If the door lock lever wont move then that may also be related to a frozen lock actuator, that is the same as above. a bad or frozen lock actuator will not allow door to lock or unlock but sometimes a bad actuator will not work with the power button but will allow you to lock and unlock with lock lever or door key, the door panel needs to be removed to check . good day.

Apr 29, 2012 | 2000 Hyundai Sonata

1 Answer

My FORD WINDSTAR 2000 SEL driver side sliding door is locked and will not allow me to unlock it even when all other doors have been unlocked.


The door lock actuator is stuck in the lock position you will need to slim jim it open meaning you will have to lose the door lock actuator on the driver sideor replace the door lock lock actuator

Aug 18, 2011 | 2000 Ford Windstar

1 Answer

I need to know the technical part name of the "door" or panel that the blend door actuator is called for my 2000 ford windstar


The door that the blend door actuator/motor moves is called the temperature blend door. Although it may not be serviced/sold separate as is the case in many applications. You may need to purchase the whole plenum chamber assembly.

Apr 05, 2011 | 2000 Ford Windstar

2 Answers

2000 impala cold passager and warm air driver side


there is an actuator for the drivers side heater that opens the temp door. this motor actuator needs changing. so it is stuck in heat mode and now motor will not move door to cold.

Jul 03, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
2000 Pontiac Bonneville Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...