Question about 2006 Chevrolet Aveo

1 Answer

Engine sin appearing permanently also hold alarm light blinking what might be the issue

Engine sin appearing permanently also hold alarm light blinking

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

There is a problem with the ECU and needs to be cleared and reset by a workshop that has a diagnostic machine

Posted on Apr 13, 2014

  • Bruce Bracey
    Bruce Bracey Apr 13, 2014

    It appears your SES light is on and flashing? If that is the case, the engine fuel managment system is dumping too much fuel into the exhaust, overheating the catalytic converter and causing the light to flash. Is the engine running smooth or does it have a miss-fire problem.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset security on 94 mazda b3000


You can put it on standby mode by holding the alarm reset button down while turning the key back & forth from off to on in the ignition twice. try it its worked before

Dec 21, 2016 | Mazda B3000 Cars & Trucks

1 Answer

How can i find the anti theft reset button on 2006 taurus


this is for a 2003, might work.

1
Press the unlock button on your vehicle's key fob to deactivate the alarm. If you've misplaced your remote for the car, use the PATS programmed key to unlock the driver's side door. Then, put the key in the ignition and turn the key to the "on" position. The vehicle's battery should be on, but the engine shouldn't be running.

2
Locate the override button on the alarm box, beneath the driver's side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the anti-theft system is disabled.

3
To reset the vehicle's alarm, put the PATS programmed key in the ignition and turn the key to the "on" position. Press the override button. When the alarm resets, it chirps two times and the LED light begins blinking.

Jun 13, 2016 | 2006 Ford Taurus

2 Answers

How do I disarm anti theft device on a 2001 ford taurus


SEE THE STEPS WITH CAREFULLY AND COMMON SENSE:God bless you
Press the unlock button on your vehicle's key fob to deactivate the alarm. If you've misplaced your remote for the car, use the PATS programmed key to unlock the driver's side door. Then, put the key in the ignition and turn the key to the "on" position. The vehicle's battery should be on, but the engine shouldn't be running.

  • 2 Locate the override button on the alarm box, beneath the driver's side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the anti-theft system is disabled.

  • 3 To reset the vehicle's alarm, put the PATS programmed key in the ignition and turn the key to the "on" position. Press the override button. When the alarm resets, it chirps two times and the LED light begins blinking.



  • 7_25_2012_6_49_12_pm.gif

    Jul 25, 2012 | 2001 Ford Taurus

    1 Answer

    The check engine light is permanently on and 4LO has been blinking on my 2011 Lexus 460


    This is a warranty issue see the dealer, do not repair it yourself or touch the engine.

    May 30, 2012 | 2011 Lexus GX 460

    1 Answer

    Interior lights blinking and a clicking noise, security light as ell comes on battery light too, and outer lights aswell blink off and on , after all that we got an alernator and battery , and the car...


    Probably not. Gm had has had antitheft ssecurity issues FOREVER and never owned up to the problem. Try this link for some help on the security problem.
    http://vatspasslockpasskeysecurityhelp.yolasite.com/

    Also, GM cars from like 2000 to 2004 had problems with the radio. I just had this same kind of thing happen in my girlfriends 01 impala. The radio was draining the battery and causing the battery to keep failing. No start issues. Car alarm always going off. All sorts of lights appearing on the dash. Low tire pressure light, check engine, brake light, ABS. You get the idea. Put in an aftermarket radio and all is well now. If your radio is acting funny, you might want to look into that.

    Sep 03, 2011 | 2003 Chevrolet Impala

    1 Answer

    I bought 2000 kia automatic i installed engine car ran good till i emptied radiator and filled with water and radiator flush then i unpluged the battery to clear chk engine light ,now it wont start i have...


    you have commited the deadly sin if a motor works ok leave well alone ,you have somehow managed to bring in the factory immobilisor so its a dealer only job to reset the alarm

    Dec 19, 2010 | 2000 Kia Sportage

    2 Answers

    How can i disarm the factory security alarm.i have tried the key locks. i have no remote with the car. i didnt know it had an alarm when i bought it . 1995 chrysler cirrus


    Here is what I do on my 95 Cirrus I also do not have a keyless remote (well I do but is broke) and after frustation after frustation trying to disarm the factory alarm I find out that by unlocking the passenger front door with the ignition key from the outside will disarm it you may have to try few times before it's disarmed you need to make sure that the blinking red light stops blinking and all of the locks on all 4 door are up or unlocked, this is what I been doing for 3 years now and that's how I disarm the alarm on my car, I hope this helps.

    May 15, 2010 | 1995 Chrysler Cirrus

    1 Answer

    My 1997 Grand Cherokee laredo has a problem with the rear hatch open/closed sensor; the ''brains'' frequently thinks the door is open when it is not. This is annoying when driving, leading to blinking...


    the rear hatch issue is due to a faulty latch assembly or needs adjustment. replace that latch issue should be resolved. but u can access the wiring to it by removing the hatch panel and seperate the connector at the latch assembly , this should turn out the light, and also keep the alarm from going off!! hope that was helpful!!

    Jul 09, 2009 | 1997 Jeep Grand Cherokee

    Not finding what you are looking for?
    2006 Chevrolet Aveo Logo

    97 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8270 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...