Question about 2003 GMC Sierra 1500

1 Answer

Remove center armrest from 2003 GMC

How do you remove the center [between the front seats] armrest/storage area. the top section has broken loose [ the part that covers the storage area and serves as an armrest when closed]. I need to know how to remove the rest of the folding section to replace it.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 3,904 Answers

These are usually a combination of Velcro, screws and snap latches. The screws have concealment caps that can be removed with a small screwdriver. The other place is under the rubber liner mats for the "catch all" area and in the bottom of the storage compartment itself. If you have any lighters, ashtrays or power points you will have to remove those first as well. Small screws usually hold those in.

Posted on Apr 14, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 334 Answers

SOURCE: 1990 gmc vandura. need to remove armrest from front seats

some are and some are not .call a big junk yard and ask them what the inner change is.

Posted on Mar 22, 2009

  • 5 Answers

SOURCE: i need too know to

you will have to remove the seat, completely dissasemble the seat frame from underneath, its alot of stuff to remove, all the lumbar switch cover on the drivers seat also, check also to make sure if you have heated seats that it isnt shorted out around the plug area

Posted on Dec 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the lower center console on a 2000 Olds Intrique


Item Part Number Description 1 060024 Floor console armrest 2 06010 Floor console storage bin 3 04338D Floor console finish panel (front) 4 044D90 Floor console finish panel (center) 5 - Floor console cup holder screws (2 required) 6 13562 Floor console cup holder 7 - Floor console front screws (2 required) 8 - Floor console rear screws (3 required) 9 - Floor console nut 10 045A36 Floor console Removal and Installation
  1. Position the seats as needed to remove the console.
  1. Disconnect the battery. For additional information, refer to Section 414-01 .
  1. Remove the floor console storage bin.
    1. Remove the 3 screws and the armrest.
    1. Remove the floor console storage bin screw.
    1. Remove the pin-type retainer.
    • Disonnect the electrical connectors.
  1. Remove the floor console front finish panel.
    • Pull upward from the front of the trim panel to release the retainers.
    • Disconnect the electrical connectors.
  1. Remove the floor console center finish panel.
  1. If necessary, remove the 2 screws and the floor console cup holder.
  1. Remove the 2 floor console front screws.
  1. Remove the 3 floor console rear screws.
    • To install, tighten to 4 Nm (35 lb-in).
  1. NOTE: Lift the console from the rear and slide it rearward to release the rear seat heater ducts from the instrument panel. Remove the nut and the floor console.
    • Disconnect the electrical connector.
    • To install, tighten to 8 Nm (71 lb-in ).
  1. To install, reverse the removal procedure.

Jun 10, 2015 | 2000 Oldsmobile Intrigue

1 Answer

How do I remove armrest storage between front seats?


Unbolt it there are about 15 bolts that r torx style

Oct 02, 2014 | 1999 Ford Taurus

1 Answer

How to replace armrest latch


If you are talking about the center armrest between the two front seats, the repair is easy. The plastic latch can be ordered for about $10 and replaced by taking apart the top lid assembly. I did it and it is not hard at all. Now if you are talking about the armrest compartment, that is one the I have not had any luck figuring out and have not found a solution to from anyone else.
If anyone knows how to reattach the armrest please let me know. My e-mail is pvd3@yahoo.com. Thanks, Pete

Jul 31, 2012 | 2003 Lincoln Town Car

1 Answer

Need to remove center console to replace seat belt. After removing 12 screws, console is still firmly in place. What else has to be done?


  1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest from the floor console.
  2. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
  3. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
  4. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
  5. Lift the floor console from the front and rear console panel mounting brackets.

Feb 27, 2011 | 1996 Ford Explorer

1 Answer

I need too know to remove the armrest from both front buckets seats in my 2001 gmc sierra, so that i can replace the seat covers.. can you give me some insight?


you will have to remove the seat, completely dissasemble the seat frame from underneath, its alot of stuff to remove, all the lumbar switch cover on the drivers seat also, check also to make sure if you have heated seats that it isnt shorted out around the plug area

Dec 20, 2010 | 2002 GMC Sierra 1500

1 Answer

Ford explorer no heat clicking in dash


NO NEED TO REMOVE WHOLE DASHBOARD!!! REMOVE TWO7MM SCREWS FROM THE BOTTOM OF STEERING PANEL & PRY AND REMOVE PANEL.
NEXT REMOVE TWO 7MM SCREWS ON BLACK PLASTIC STRIP THAT YOU SEE AFTER REMOVING STEERING PANEL....PRY THIS STRIP OF PLASTIC OUT JUST A LITTLE AND CUT IN THE MIDDLE .
NEXT REMOVE TWO 7MM SCREWS FROM AROUND TOP OF INSTRUMENT PANEL (BY GAUGES ) PRY PANEL STARTING FROM AROUND VENT ON LEFT BY DRIVERS DOOR ""THIS PANEL WILL STAY IN PLACE LOOSE... NO NEED TO REMOVE!""
NEXT YOU WILL SEE 0NE 7MM SCREW BY GEAR SELECTOR AREA.. BEHIND THE LOOSE PANEL REMOVE THIS SCREW.. ALSO IN SAME AREA BUT LOWER THERE IS ONE 7MM SCREW THAT NEEDS TO BE REMOVED THAT HOLDS LOWER DASH PAD ITS FOUND BEHIND LOWER CORNER OF DASH PAD.( LOWER DASH PAD GAS PEDAL AREA )
"DON'T"!!! REMOVE THE FOUR 10MM BOLTS!!!! IN SAME AREA
NEXT REMOVE RADIO /AC CONTROL TRIM WITH THIN SCREW DRIVER OR PANEL TOOL IT HELD IN BY SIX CLIPS...NO NEED TO DISCONNET ANYTHING IT WILL STAY THERE HANGING!!
NEXT REMOVE TWO CENTER CONSOLE LOWER LARGE PLASTIC CLIPS BY FLOOR MATS. NEXT UNDER SQUARE BLACK RUBBER AT CENTER CONSOLE REMOVE ONE SILVER SCREW. MOVE SEATS FOWARD AND REMOVE TWO 8MM SCREWS FROM SIDES OF CENTER CONSOLE FROM BACK SEAT.
PRY CUP PANEL SECTION THAT WAS HELD DOWN BY SILVER SCREW ...PRY UP TOP HALF OF CONSOLE STARTING FROM SECTION WHERE ARMREST DOOR IS.. DISCONNECT LIGHTER PLUG AND REMOVE PANEL .
NOW YOU WILL SEE SIX SCREWS STARTING FROM BELOW RADIO TRIM WORKING BACK TO ARMREST DOOR

Dec 04, 2010 | 2004 Ford Explorer

1 Answer

Center console disasembly instructions . we are trying to remove the center console


Base Console, Floor, Ranger, Explorer Removal and Installation
  1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest (644A22) from the floor console.
  1. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
  1. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
  1. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
  1. Lift the floor console from the front and rear console panel mounting brackets.

c758709.gif

Apr 01, 2010 | 1996 Ford Explorer

1 Answer

1990 gmc vandura. need to remove armrest from front seats


some are and some are not .call a big junk yard and ask them what the inner change is.

Mar 22, 2009 | 1990 GMC C2500

4 Answers

Heating


"Blend door stuck and clicks on your 2003 Ford Explorer?\" FIRST BUY OEM BLEND DOOR MOTOR $57.00 + UP TOOLS NEEDED : PANEL TOOL OR FLAT BLADE SCREWDRIVER ,1/4 SOCETS 7 & 8MM ....1/4 HANDLE...1/4 SMALL EXTENTION...1/4 RATCHET NO NEED TO REMOVE WHOLE DASHBOARD!!! REMOVE TWO7MM SCREWS FROM THE BOTTOM OF STEERING PANEL & PRY AND REMOVE PANEL. NEXT REMOVE TWO 7MM SCREWS ON BLACK PLASTIC STRIP THAT YOU SEE AFTER REMOVING STEERING PANEL....PRY THIS STRIP OF PLASTIC OUT JUST A LITTLE AND CUT IN THE MIDDLE . NEXT REMOVE TWO 7MM SCREWS FROM AROUND TOP OF INSTRUMENT PANEL (BY GAUGES ) PRY PANEL STARTING FROM AROUND VENT ON LEFT BY DRIVERS DOOR ""THIS PANEL WILL STAY IN PLACE LOOSE... NO NEED TO REMOVE!"" NEXT YOU WILL SEE 0NE 7MM SCREW BY GEAR SELECTOR AREA.. BEHIND THE LOOSE PANEL REMOVE THIS SCREW.. ALSO IN SAME AREA BUT LOWER THERE IS ONE 7MM SCREW THAT NEEDS TO BE REMOVED THAT HOLDS LOWER DASH PAD ITS FOUND BEHIND LOWER CORNER OF DASH PAD.( LOWER DASH PAD GAS PEDAL AREA ) "DON'T"!!! REMOVE THE FOUR 10MM BOLTS!!!! IN SAME AREA NEXT REMOVE RADIO /AC CONTROL TRIM WITH THIN SCREW DRIVER OR PANEL TOOL IT HELD IN BY SIX CLIPS...NO NEED TO DISCONNET ANYTHING IT WILL STAY THERE HANGING!! NEXT REMOVE TWO CENTER CONSOLE LOWER LARGE PLASTIC CLIPS BY FLOOR MATS. NEXT UNDER SQUARE BLACK RUBBER AT CENTER CONSOLE REMOVE ONE SILVER SCREW. MOVE SEATS FOWARD AND REMOVE TWO 8MM SCREWS FROM SIDES OF CENTER CONSOLE FROM BACK SEAT. PRY CUP PANEL SECTION THAT WAS HELD DOWN BY SILVER SCREW ...PRY UP TOP HALF OF CONSOLE STARTING FROM SECTION WHERE ARMREST DOOR IS.. DISCONNECT LIGHTER PLUG AND REMOVE PANEL . NOW YOU WILL SEE SIX SCREWS STARTING FROM BELOW RADIO TRIM WORKING BACK TO ARMREST DOOR .REMOVE ALL SIX..THESE HOLD THE BOTTOM PORTION OF THE CONSOLE ALSO DISCONNET ONE BLACK PLUG AND PULL ALL THE WIRES CLIPPED DOWN...PULL BOTTOM PORTION OF CONSOLE TO BACK SEAT. PULL LOWER DASH PAD GIVE A NICE TUG.. IT SHOULD MOVE OUT A LITTLE ..DID YOU REMEMBER ONE SCREW BEHIND CORNER DASH..!.STARTING FROM AREA BY GAS PEDAL LOOK UP IN THIS AREA YOU WILL HAVE ENOUGH ROOM TO GET A LONG EXTENTION WITH AN 8MM SOCKET TO REMOVE 3 SCREWS HOLDING MOTOR TO BLACK PLASTIC SECTION.. REMOVE SCREWS DISCONNECT SMALL BLACK PLUG AND PULL MOTOR FROM SOCKET GOING TOWARD DRIVERS DOOR DIRECTION. ALIGN NEW MOTOR SHAFT WITH SOCKET TIP.......IF NEED BE..... YOU COULD PLUG MOTOR HARNESS INTO NEW MOTOR THEN TURN IGNITION ON AND MOVE HEATER/AC CONTROLS TO GET THE SHAFT LINED UP..DONT MOVE ANY OTHER WAY!!!!!! NOW PUT SHAFT INTO SOCKET MAKE SURE YOU CONNECTED THE PLUG IF YOU HAVEN'T ALREADY!! INSTALL 8MM SCREWS AND TRY IT OUT YOU SHOULD HAVE HEAT NOW NOW INSTALL EVERTHING BACK IN REVERSE ORDER

Sep 29, 2008 | 2003 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...