- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it is located under the coolant reservoir. Remove nut and ground cable (not required, but easier access), then 2 bolts . pull relay down and remove 2 plugs from bottom of relay. Make sure and clean plugs and relay receptacles with contact cleaner and dry before reinstalling.
Im not sure what exactly you are asking about. As far as the ignition goes, the coils on those cars are known to crack down the center. Also the ignition module is located on the under side of the coil itself. If you are reffering to the cam position sensor it is the reluctor pickup in the distributor itself.
remove wipers. remove plastic covering by loosening plastic screws first. unplug wiper motor wires. there are about three 10mm nuts at the motor location and you also have to unscrew the big nuts that were below the wipers when you unscrewed them. replacement is reversal.