Question about 1998 Chrysler Sebring

Open Question

Valve cover gasket oil leak , V-6 Chrysler Sebring

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 323 Answers

SOURCE: 1999 Chrysler Sebring Coupe 2.5 oil in spark plug

It is possible the tubes are leaking at the bottom but highly unlikely. There is next to 0 oil pressure in that area so the tubes would actually drain if leaking. I would start with the tube seals and gaskets as you have already planned and check it again later down the road like at the next oil change interval. You're on the right track for the repair, just be patient with the intake plenum and you'll do fine.

Posted on Jul 28, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone.tell me the Torqe specs for a 2004 or cruiser


Head and Cam Bolt Torque specs? - PT Cruiser Forum

www.ptcruiserlinks.com > ... > Tech & Performance Forum

Nov 5, 2012 - 2 posts - ‎2 authors
I am putting everything back on after replacing the head gasket. I was wondering what the Torque Specs and Sequences are for both the Head ... Torque Specs
10 posts
Jul 28, 2012
Valve cover torque specs
5 posts
Jul 4, 2011
Timing Repair Project - Bolt Torque Specs
7 posts
Jun 16, 2011
torque specs?
9 posts
Mar 20, 2006
More results from www.ptcruiserlinks.com

Dodge Stratus / Chrysler Pt Cruiser / Sebring Camshafts ...

? 5:07
https://www.youtube.com/watch?v=2wB2o27eWgo
Aug 20, 2015 - Uploaded by World Mechanics
Dodge Stratus / Chrysler Pt Cruiser / Sebring Camshafts Install and Torque Specs 2.4 Engine. ... 2004 Chrysler PT CruiserCamshaft Install

Dodge Stratus / Chrysler Sebring / Pt Cruiser 2.4 Head ...

? 6:08
https://www.youtube.com/watch?v=7rY7tDbye-8
Aug 16, 2015 - Uploaded by World Mechanics
... Stratus / Chrysler Sebring / Pt Cruiser 2.4 Head gasket Install and torque specs We took this video to ... 2004 Chrysler PtCruiser head gasket

Jan 18, 2016 | Cars & Trucks

1 Answer

How to change and replace valve cover gaskets in a 2004 Chrysler Sebring Convertible 2.7L DOHC V6


You first have to remove the ignition coils or plug wires and then remove the bolts holding the cover to the cylinder head. Discard old gasket. Clean gasket channel of any oil and install new gasket to cover taking care during assembly not to disturb gasket when placing cover back on cylinder head. The rear gasket is much harder to change as the upper plenum must be removed to access this cover. You should have some knowledge of engines if you are going to atempt this repair on your own

Apr 05, 2015 | Chrysler Cars & Trucks

1 Answer

My 1999 Town n Country limited is dripping oil near front passanger tire.


more than likely you have a valve cover leak its common you will need to re move the cover
1 take out the bolts 6 i believe 7/16 socket remove the small bolts
2 pry the valve cover off
3 clean the old gaskets off the valve cover and motor
4 clean the valve cover and paint the valve cover light blue so you can see any leaks
that may happen // i dout if you will have any
5 put a small amount fo permatex (BLACK) it works well with oil and it will hold the gasket in place
once you put the gasket on the on the valve cover put a small amount on the bottom of the
gasget/// you will have permatex on both sides of the gasket
6 now you are ready to in stall tha valve cover back on the motor and put in all the bolts finger
tight once all the bolts are in you want to snug the bolts don't try to tighten the bolts to much
or you will cut the new gasket
7 now that every thing is back in check your oil level and run the engine for ten min this will set up
the new gasket and give the permatex a chance to cure

done deal

hope this helps you
good luck
bob

May 07, 2011 | 2002 Chrysler Town & Country

1 Answer

The dealer said my 2004 Chrysler oil sending unit was leaking around the vent tube. I paid $259.00 to have it fixed because the oil light came on too. The light is fixed, but it is leaking again. What is...


it's probably your valve cover gasket leaking. I would take it back to dealership and have them repair under warranty. If they want to charge you for something new, DON'T let them fix anything, look on the internet for a shop close to you with GOOD reviews and have them double check the cause.

Feb 05, 2010 | 2004 Chrysler Sebring

2 Answers

2002 chrysler sebring 2.4l leaking water is it water pump


Yes you are correct the water pump is driven by the timing belt so if it leaks it will run down the back side of the engine from behind the timing belt cover :)

Jan 31, 2010 | Chrysler Sebring Cars & Trucks

1 Answer

Is it difficult to change the spark plugs on a 2004 Chrysler Sebring Convertible V6


Yes. Yopu must remove the plenum, which means a new gasket.

The plug wires go down into the valve covers. The circular gaskets there often leak, so I would replace the wires and gaskets around them at the same time because it is all exposed.

Dec 01, 2009 | 2004 Chrysler Sebring

1 Answer

1999 Chrysler Sebring Coupe 2.5 oil in spark plug tubes. Replacing valve cover gaskets and spark plug tube seals at top of tubes. Concerned about bottom of tube. Is that an area that might also be...


It is possible the tubes are leaking at the bottom but highly unlikely. There is next to 0 oil pressure in that area so the tubes would actually drain if leaking. I would start with the tube seals and gaskets as you have already planned and check it again later down the road like at the next oil change interval. You're on the right track for the repair, just be patient with the intake plenum and you'll do fine.

Jul 27, 2009 | Chrysler Sebring Cars & Trucks

1 Answer

Random Misfire


yes disbuter buddie is bad nad its form oil getting in plugs form bad gaskets on valve covers ok so u need new disbuter then gaskets redone stop oil geting in ther i have one these i know it all on this car

Oct 07, 2008 | 2000 Chrysler Sebring

Not finding what you are looking for?
1998 Chrysler Sebring Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...