Question about 1995 Nissan Quest
No click from starter at all? Check charge on battery , check voltage at solenoid on starter when trying to start. Could also be faulty ignition switch. Remember this unit is more of a ford product than a Nissan.
Posted on Jul 09, 2009
Does it work in neutral, or if you move lever (wiggle)?
Is shifter loose? A bolt sometimes comes loose under steering column.
go here for expert villager & quest help.
read files and see pics on loose shifter. ask questions too.
Posted on Aug 05, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Interesting problem, on the starter is a "trigger" wire that originates from the ignition (may run to the power distribution center). When the truck is started 12 volts runs down that wire and activates the solinoid on the starter. Put a 12 volt test light on the trigger wire by the starter, have someone hit the key to start, test light should come on, if not chase wire back and look for a break in the wire or replace trigger wire.
Posted on Jan 09, 2009
The click you hear is the starter relay. Check for continuity thru relay with battery negative cable disconnected and switch in start position. If no continuity, it probably has burned contacts. Sometimes these can be taken apart and contacts filed/sanded cleaned.
Posted on May 02, 2009
Tips for a great answer:
Aug 19, 2014 | 1996 Nissan Quest
Apr 23, 2011 | 1997 Nissan Quest
Jun 15, 2010 | 1995 Pontiac Grand Prix
Mar 14, 2010 | 1996 Nissan Quest
Jan 21, 2010 | 1995 Nissan Quest
Aug 24, 2009 | 1995 Nissan Pickup
Jan 15, 2009 | 2001 Ford F350 Super Duty SuperCab
727 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: