Question about 1999 Mitsubishi Diamante

Open Question

Were is the front crash sensor - 1999 Mitsubishi Diamante

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IS THE 1994 FORD ESCORT AIRBAG CODE 34 REPAIR


Ford Airbag Fault Codes
Flash Code Component/Fault Description
- No Air Bag Indicator - Inoperative Indicator Circuit
- Continuous Air Bag Indicator - Diagnostic Trouble Code Timed Out, Diagnostic Monitor
Disconnected or Inoperative, or No Ignition Voltage to Diagnostic Monitor
12 Lost Battery Feed
13 Air Bag Circuit Shorted to Ground
14 Primary Crash Sensor Circuit Shorted to Ground
21 Diagnostic Monitor Not Mounted to Vehicle Properly
22 Safing Sensor Output Circuit Shorted to Battery Voltage
23 Memory Clear Circuit Improperly Grounded
24 System Disarm Failure or Internal Diagnostic Monitor Fault
32 Driver Side Air Bag Circuit High Resistance or Open
33 Passenger Side Air Bag Circuit High Resistance or Open
34 Driver Side Air Bag Circuit Low Resistance or Shorted
35 Passenger Side Air Bag Circuit Low Resistance or Shorted
41 Right Radiator Primary Crash Sensor Feed/Return Circuit Open
42 Left Radiator Primary Crash Sensor Feed/Return Circuit Open
44 Right Radiator Crash Sensor Not Mounted to Vehicle Properly
45 Left Radiator Crash Sensor Not Mounted to Vehicle Properly
51 Airbag diagnostic Monitor Internal thermal fuse Blown
52 Back-up Power supply Voltage Boost Fault
53 Front Crash Sensor High Resistance or Diagnostic Monitor Failure

Aug 12, 2014 | 1994 Ford Escort

1 Answer

Where is the location of front crash sensor in a 2008 ford focus?


The crash sensors should be mounted off the front horn of the frame ( on either side). The sensors will be leads and wires that go back to the "black box" located under the body towards the front firewall. This is where the information us processed and sent to the airbag deployment system and allows for for fuel delivery shutoff.

Jul 10, 2014 | 2008 Ford Focus

1 Answer

Crash senson


i think that wejerkittoo4 has the right start on this problem...maybe you can print out assembly diagram and do the tracing of wires to see which ones you may have to replace...

Apr 02, 2014 | 1999 Volkswagen Passat

1 Answer

Air bag light blinks a code 13 continuously, It doesn't come on and stay on it blinks 1---1-1-1......1---1-1-1.....etc. I have change the two sensors in the front, checked fuses(no fuses with a direct link...


The Supplemental Air Bag Restraint System consists of two basic sub-systems:
  • Driver side air bag module (043B13) and passenger side air bag module (044A74).
  • Electrical system, including RH primary crash front air bag sensor and bracket (14B004) , LH primary crash front air bag sensor and bracket (14B005) , LH kick panel safing rear air bag sensor and bracket (14B007) and air bag diagnostic monitor (14B056) .
---------------------------------------------------------------------------------------
13 Air Bag or Primary Crash Sensor Circuit Shorted to Ground
  • Inspect air bag sliding contact wiring in steering wheel , driver side air bag module , and passenger side air bag module for damaged, chafed or pinched wires.
  • -------------------------------------------------------------------------------------

    Oct 28, 2010 | 1993 Mercury Grand Marquis

    1 Answer

    I've been in a wreck the damage is fixed. I have a new airbag control module. I've been told I need to replace the "crash sensors" before installing the new airbag control module. Where are the Crash...


    The crash sensors are located inside the computer the accelarometer would of been replaced if the computer was replaced. Or the air bag control modual. The clock spring would need to be replaced but the front magnetic sensors should be fine, they don't normally wear out. they can be damaged but the air bag warning light would flash if it was bad. And the air bag would still not go off unless the other condtions are met to make the bag deploy. The air control modual would have been replaced if it was done by a shop that is part of the service when the bags deploy. The crash sensors are a magnet with a steel ball and when the right speed is reached and the ball is let go from the metal o ring that it sits in it will deploy the first trigger the next trigger would be the acelorometer in the air control module and the impact would have to be strong enought to knock that ball loose as well to trigger the air bag.

    Mar 16, 2010 | 2006 Ford Fusion

    1 Answer

    It gives a message such as : crash shut down


    Check if the leads from the shock sensor aren't loose.
    You'll find shock sensors on the inner front wings and other places in the car.
    Huge job!

    Other system, let the system be read-out by a VW dealer...

    Nov 01, 2009 | 2004 Volkswagen Touareg

    2 Answers

    1997 Escort Sdn., airbag light flashes 4 times


    Pinpoint Test R: Diagnostic Trouble Code 44 — RH Radiator Primary Crash Front Air Bag Sensor Not Mounted to Vehicle Properly Normal Operation
    NOTE: Circuit 618 (BL/W) is grounded to the side of the RH radiator primary crash front air bag sensor case, and the case is grounded through the bracket to the vehicle at its mounting point.
    The air bag diagnostic monitor (14B056) measures the resistance between pin 20 (circuit 618 [BL/W]) and pin 3 (circuit 57M [BK]), the air bag diagnostic monitor reference ground. If the air bag diagnostic monitor measures a difference of more than 2.0 ohms between pin 20 and pin 3, it will flash diagnostic trouble code (DTC) 44.
    Possible Causes
    High resistance on pin 20 (circuit 618 [BL/W]) to ground can be caused by:
    • A poor connection due to loose mounting, dirt, or corrosion at the RH radiator primary crash front air bag sensor bracket mounting location.
    • An open or damaged wire in circuit 618 (BL/W) from pin 20 of the air bag diagnostic monitor connector to the RH radiator primary crash front air bag sensor connector.
    • An open circuit inside the RH radiator primary crash front air bag sensor.

    Oct 26, 2009 | 1997 Ford Escort

    2 Answers

    How to replace front airbag sensor on 2005 nissan altima


    1 First remove Both Positive and negitive battery terminals. wait atleast 3 minutes.
    2 Remove front grille
    3 Disconnect crash sensor Plug.Crash sensor is just below the hood latch.
    4Remove crash sensor retaining nuts.
    5 Remove crash sensor.
    Installation is the reverse order

    Sep 25, 2009 | 2005 Nissan Altima

    Not finding what you are looking for?
    1999 Mitsubishi Diamante Logo

    Related Topics:

    10 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8518 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...