Question about 2010 Cadillac SRX Luxury

Open Question

Rear hatch door will not open on my cadillac srx

Rear hatch door will not open

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Replacing front turn signal bulb on 2006 Cadillac SRX

wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.

Posted on Jan 25, 2009

  • 156 Answers

SOURCE: Front turn indicators don't work, on 04 Cadillac SRX

you may want to check the fuse for the signals and asfor the locked windows, it sounds like your window lock has either seized or the button is off track. In any case, replacement would be the best option.

Posted on Feb 23, 2009

techbuster
  • 5081 Answers

SOURCE: rear liscese plate bulbs on 05 cadillac srx

First you have to take out the one and only screw in the rear hatch door - it's where the hand pull down is you use to close the hatch.
Then you have to pop all the plastic clips all the way around the plastic door panel, trying not to pull them out from the frame . If you do pull out the white plastic plugs from the frame you better make certain you take them off the plastic housing and insert them back into their frame holes - or you will never get the housing back on.

Once you have the housing loose disconnect the inside tail gate light wire to remove the whole thing. Then you have to remove 7 to 8 nuts from the back of entire License plate, back up bulb housing using a deep socket to get in there. Work it loose from the rear of the car and it will come out just enough to work on the lights.
This is tricky since the screw mounts don't give you much room to work with.

Once you have the license plate and back up bulb frame loose you will see the two housings for the license plate bulbs on top.

Slide out the license plate bulb lens and twist the bulb connection to remove the bulbs.
Replace both of them - you don't want to do this again in a month when the other one blows.

OPTIONAL:
Once you take out the bulbs you might see that the housing is melted where the bulb wanted to burn through. Drill two small holes one is each end of the housing before I put everything back together to release some of the heat.


Reverse the whole process to put everything back together. It's not easy.
Make sure you insert the cables through the opening for the hatch handle or it will kink and not work properly.

The bulbs come in a two pack of cost $4.95 .

Posted on Nov 24, 2009

  • 396 Answers

SOURCE: Wiring diagram for 2009 Cadillac SRX

Try your dealer parts counter.

Posted on Jan 16, 2010

  • 4336 Answers

SOURCE: how to replace rear shocks on a 2006 cadillac srx

Your car should have different shocks from most cars, with the magnetic, electrical charge viscosity change. Be sure that the shocks are actually not functioning correctly.

Posted on Sep 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear gate will open but not close srx 2007


Could be the remote(have it checked) or the receiver in the vehicle. Have the codes checked.

Jul 10, 2016 | 2007 Cadillac SRX

1 Answer

2011 CADILLAC SRX WILL NOT START. LIGHTS AND REAR HATCH WILL OPEN SO DOESN'T SEEM TO BE THE BATTERY???


Try jump starting it from another car. or that thing should have a volt gauge while trying to crank it if it drops lower then 11volts it wont start. or if you can hook up a volt gauge to the battery if not just try jump starting it.

Dec 12, 2014 | 2011 Cadillac SRX

1 Answer

The rear hatch, seats and sun roof don;t work


Need factory service manuals to follow
trouble charts to find a problem

A wiring diagram would be were I would start,
to learn those circuits.

Aug 05, 2014 | 2008 Cadillac Srx

1 Answer

My 2004 Cadillac Escalade rear hatch won't open. No key hole so what do I do?


Double Click the DOOR OPEN BUTTON... (or 3-4 times) and that should work. If it does not, then you have an Internal Mechanical Issue.

If you can not get it open (Unlocked, You are going to have to take the Panel off and unlock it from the Inside.

Be careful NOT to break the Panel, it is a Tight Fit. But you can do it...

Apr 04, 2013 | Cadillac Escalade EXT Cars & Trucks

1 Answer

I have a 2005 escalade and rear door hatch lock is locked and will not unlock. how do I open hatch


Hi, my 2005 Cadillac SRX rear hatch is locked and will not unlock, do anyone have an idea or have come across the same proble. Thanks

Nov 05, 2010 | 2005 Cadillac Escalade Ext

1 Answer

When i unlock the srx all the doors open but the hatch stays locked on my 2005.


check the aouto motor four the lock on back tes it on the battery to se if it works if not that check youre fuse box four a blown fuse or its a security system and if so speek to a dealer

Feb 28, 2010 | 2005 Cadillac SRX

1 Answer

Rear liscese plate bulbs on 05 cadillac srx


First you have to take out the one and only screw in the rear hatch door - it's where the hand pull down is you use to close the hatch.
Then you have to pop all the plastic clips all the way around the plastic door panel, trying not to pull them out from the frame . If you do pull out the white plastic plugs from the frame you better make certain you take them off the plastic housing and insert them back into their frame holes - or you will never get the housing back on.

Once you have the housing loose disconnect the inside tail gate light wire to remove the whole thing. Then you have to remove 7 to 8 nuts from the back of entire License plate, back up bulb housing using a deep socket to get in there. Work it loose from the rear of the car and it will come out just enough to work on the lights.
This is tricky since the screw mounts don't give you much room to work with.

Once you have the license plate and back up bulb frame loose you will see the two housings for the license plate bulbs on top.

Slide out the license plate bulb lens and twist the bulb connection to remove the bulbs.
Replace both of them - you don't want to do this again in a month when the other one blows.

OPTIONAL:
Once you take out the bulbs you might see that the housing is melted where the bulb wanted to burn through. Drill two small holes one is each end of the housing before I put everything back together to release some of the heat.


Reverse the whole process to put everything back together. It's not easy.
Make sure you insert the cables through the opening for the hatch handle or it will kink and not work properly.

The bulbs come in a two pack of cost $4.95 .

Nov 24, 2009 | 2005 Cadillac SRX

1 Answer

Front turn indicators don't work, on 04 Cadillac SRX


you may want to check the fuse for the signals and asfor the locked windows, it sounds like your window lock has either seized or the button is off track. In any case, replacement would be the best option.

Feb 23, 2009 | 2004 Cadillac SRX

Not finding what you are looking for?
2010 Cadillac SRX Luxury Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...