Question about 2002 Mitsubishi Lancer
Drivers side door lock will not lock the car with the key or from the inside of car either. Also NONE of the windows go down or up with ANY of the window buttons.(right now windows are up& will not go down) I can lock the car from the passengers side door though.I had the car checked out & i was told the fuses & relay switch were working fine. That it was the circuit board in drivers side door window controller. I bought a used one & tried putting it on & it also did not work. I was told it could possibly be the wire harness that connects to the circuit board. Could this be it & how would i go about fixing this in an affordable manor?? Please help me!
Posted by Anonymous on
does the master switch have a other door lock button
so central locking and windows dont work as they should
driver side window motor faulty
individual door lock actuator motors not getting power
it is possible the central locking module wont work unless reset to the other cars electronics with the correct scanner
Posted on Apr 05, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem with my driver side window, so I just replaced the power window motor. It took less than an hour, cost about $35 or $40 and it works perfectly now.
Posted on Aug 17, 2008
the switches need cleaning ,they have contacts in them that get dirty you can spray contact cleaner on them or use emery paper to file them, they are not to hard to pull apart
Posted on Jan 16, 2009
You'll need to replace the solenoid (motor) that doesn't work. Not hard once you get the door panel off. I suggest you buy the correct part, not a universal one.
Posted on Jul 14, 2009
Check your fuses first. Then check for power at the switches, and power from the switches to the respective solenoid and motor. Most likely it's fuses. Also check where the wiring runs through the door into the car for bare spots in the wiring that might have blown the fuses.
Posted on Jan 21, 2010
Tips for a great answer:
Mar 06, 2016 | 2007 Opel Corsa Utility
Mar 16, 2014 | Volkswagen Jetta Cars & Trucks
Apr 18, 2013 | 1998 Lincoln Town Car
Apr 07, 2013 | 2000 BMW 3 Series
Nov 07, 2012 | Cars & Trucks
Apr 21, 2011 | 1996 Oldsmobile Aurora
Aug 09, 2008 | Kia Rio Cars & Trucks
Aug 02, 2008 | 2000 Dodge Durango
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: