Question about 1988 Ford Bronco

Open Question

6 pin neutral safety switch for a 1988 ford bronco

I need the wiring diagram for a 6 pin neutral safety switch for a 1988 full size bronco with a 5.8w motor and a c6 transmission

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ford_67
  • 34 Answers

SOURCE: NEED WIRING DIAGRAM FOR 1988

Here is the info you neede728afa.jpg

Posted on Aug 07, 2008

  • 3 Answers

SOURCE: firing order for 1989 full size ford bronco 302

13726548 #1 cyl is front pass side and count to back 1234 are on pass side.5678 are on driver side.# 5 being front

Posted on Apr 22, 2009

  • 4 Answers

SOURCE: i have a 1988 ford bronco full size xlt it is ideling low when u

I just had the same issue with my 88 xlt w/351 W it wound up being the MAP sensor and the timing. I would check both of these and see if it solves your issue.

Posted on Apr 23, 2009

MrIonov
  • 1 Answer

SOURCE: Need Diagram of a C6 Transmission Valve Body for a Ford Econoline

its a 2-3 Shift valve. ball it i have picture
http://photos-h.ll.facebook.com/photos-ll-snc1/v3351/179/39/694531775/n694531775_2324791_4797721.jpg

Posted on Apr 29, 2009

canbruce75
  • 1776 Answers

SOURCE: neutral safety switch

The neutral safety/back-up light switch is located at the transmission. I am attaching a photo for reference. Hope this helps and best wishes.

08face1.jpg

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need spark plug diagram for 93 Bronco


Hi there:
You have several engine sizes there:

1993 Ford Bronco Full Size 4.9 liter L6 VIN "Z"

6_3_2012_1_09_49_pm.gif



1993 Ford Bronco Full Size 5.0 liter V-8 VIN "N"

6_3_2012_1_10_39_pm.gif



1993 Ford Bronco Full Size 5.8 liter V-8 VIN "H"


6_3_2012_1_11_20_pm.gif



Hope this hesl; remember to rating this answer.

Jun 03, 2012 | 1996 Ford Bronco

1 Answer

Can you eliminat the fuseable links at the starter solenoid? my 1988 bronco wont start replace all battery cables because the burned up and replace starter and solenoid and still wont start. where should i...


check park-neutral safety switch.

If you can jump start starter right at starter, then look at above or igntion switch. Try starting in neutral too. In case P-N switch is out of adjustment.

Aug 27, 2011 | 1987 Ford Bronco

2 Answers

Is the back up switch connected to the shifting linkage of the automatic transmission on my 1988 ford bronco II


If you have the C5 trans, here is the info:

C5 Transmission
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle safely.
  3. Remove the downshift linkage rod from the transmission downshift lever.
  4. Apply rust penetrant to the outer lever attaching nut to prevent breaking the inner lever shaft. Remove the transmission downshift outer lever attaching nut and lever.
  5. Remove the two neutral start switch retaining bolts.
  6. Disconnect the multiple wire connector.
  7. Remove the neutral start switch from the transmission.

To install:

  1. Install the neutral start switch on the transmission. Install the two retaining bolts.
  2. Adjust the neutral safety switch following the above procedure.
  3. Install the outer downshift lever and retaining nut, and tighten the nut. Install the downshift linkage rod with the retaining clips.
  4. Connect the wire multiple connector. Check the operation of the switch. The engine should start only with the transmission selector lever in N or P.

If it is the:
C3 And A4ld Transmissions
It's on the transmission....


// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 35; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> c17hydro_179.gif

Neutral start switch and its location on the C3 and A4LD transmissions

May 12, 2011 | 1988 Ford Bronco II

2 Answers

Bronco wont start 88 ford bronco just replaced tranny and now won't start. i've hooked everything back up but one of the wires to the transfer case bc i broke the plug in. any ideas why it wont start...


The neutral safety switch is located on the side of the transmission and it is usually attached behind the shifter linkage and it is secured with two small bolts that can be loosened up to allow for adjustment of the neutral safety switch.

To adjust the neutral safety switch place the transmission into neutral, (block the tires) there is a notch or and indent marker on the housing of the neutral safety switch that should be lined up with a line on the face of the collar that is around the shifter detent shaft, and if they are not in alignment then loosen the two bolts that secure the neutral safety switch and then turn the neutral safety switch until they are aligned and then tighten the securing bolts to the neutral safety switch, and then test the starter. If the starter fails to engage then either the neutral safety switch is faulty, the neutral safety switch has been by-passed all this time and the by-pass (I will usually find things like a paper clip shoved into the vehicles wire connector with electrical tape around it) has fallen out of the wire connector from the vehicle wiring harness, or the battery just went dead. if you have the neutral safety switch from the old transmission still available try using it to test the neutral safety circuit. I have provided you with an image to help assist you adjust the neutral safety switch.


0b4222e.jpg

Jun 20, 2010 | 1988 Ford Bronco

1 Answer

Removing neutral safety switch


Check out the autozone website at autozone.com and register your vehicle. It is free and will give you access to an online repair manual for the vehicle. The steps for removing the neutral safety switch can be found there. Hope this helped. Best wishes.

Aug 03, 2009 | 1992 Ford Bronco

1 Answer

Neutral safety switch


The neutral safety/back-up light switch is located at the transmission. I am attaching a photo for reference. Hope this helps and best wishes.

08face1.jpg

Aug 03, 2009 | 1992 Ford Bronco

1 Answer

Fuse for 88' Ford Bronco


Fuse #1 20amp: Headlight Flash-to-pass; Daytime running lamps ( Canada Only ) OR Fuse # 19 40 amp maxi.; Headlamps.

Jan 21, 2009 | 1988 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...