Question about 2011 Nissan Altima 2.5

Open Question

Altima fob manual key will not open door - 2011 Nissan Altima 2.5

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
FixurNissan
  • 61 Answers

SOURCE: key fob interference problem 2003 altima

Hello and thank you for using FixYa!

Most likely the remote has failed. If you have another remote for the car, try it. All features should work on the spare remote. You will need to get another remote and program it to correct this. Here is a link on how to program it.

http://www.ehow.com/how_4669678_program-nissan-remote.html

Thanks Jay!

Posted on Jul 17, 2009

Ad
  • 770 Answers

SOURCE: Key Fob for a 2001 Nissan Altima keeps opening the

You probably have a stuck button. If you can take apart and clean, It'll probably start workin properly. If you can't you may want to try one of those compressed air cleaners, available at best buy or office stores, used to clean keyboards and electronics. If none of that works, you may have to replace the fob...about $60.

Posted on Oct 01, 2009

  • 3 Answers

SOURCE: 2011 Nissan Altima - trunk

My wife is in San Francisco on business right now. She is driving this vehicle as a rental and found out that the trunk can be opened after you have locked the car the hard way. Her luggage and computer was taken from the trunk because of an outer trunk release button that you can access. Nicely done Nissan. Thanks. (sarcasm)

Posted on Feb 04, 2011

pctech1
  • 1940 Answers

SOURCE: I have a 2007 nissan

You can arm and disarm the alarm from the drivers door lock Cylinder by turning and holding the unlock (disarm) for two seconds alarm and headlights will stop flashing. If the drivers side lock does not work you can do this from the trunk lock Cylinder too.

Turning and holding the lock to lock also (arms) the security light and alarm.

The alarm stops only by unlocking the driver's door or the trunk lid with the key, or by pressing the Unlock button on the intelligent key.

It sounds like your battery may have died, so you may have to charge the battery before attempting to disarm the security system.

Posted on Mar 28, 2011

nebby58
  • 257 Answers

SOURCE: Sorry my car was not

You are going to need to check the power lock control moduel on the inside of the door panel. If the FOB appears to be working but the doors are not unlocking, you need to check this. I would also replace all fuses that control the locks. If both of these devices check out ok, you may need to replace your FOB. To check your power lock control moduel, manually lock and unlock your doors by pressing the lock button on the inside of the door. If it does not work, it is either the fuses or the power lock control moduel. If it works, your FOB has gone bad. Hope this helps! Please rate 4 thumbs up!

Posted on Apr 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't my 2013 Nissan Sentra recognize the FOB? Says FOB "not detected" when its in my hand. Is this a dead battery in the FOB? how do I get this fixed?


Does the key fob open the and close the door? If it does the battery is fine.

This seems to be a known problem. Move the fob closer to the Start Button.

http://www.nissanclub.com/forums/2013-nissan-altima-discussion-2-5-3-5/337333-intelligent-key-not-recognized.html

Instructions for reprogramming

http://www.nissanhelp.com/diy/common/nissan_reprogram_key_fob.php

http://www.carcomplaints.com/Nissan/Altima/2014/electrical/fob_not_recognized.shtml

Dec 02, 2015 | 2013 Nissan Sentra

1 Answer

2008 Altima with push button start. Why won't the fob unlock doors?


Insert key into and remove it from ignition more than six times in 10 seconds. When the hazards lights will flash twice insert key into ignition and turn to ACC position.
Then push any button on key fob once, the hazard lights will flash twice. Then open drivers door to END.
Should be all working again.

Jun 06, 2015 | 2008 Nissan Altima

1 Answer

1998 altima key fob won't lock doors and alarm doesn't work


More than likely the battery is dead or the remote has lost programming.

Jul 16, 2013 | Cars & Trucks

1 Answer

I changed my car battery, now my 2008 Nissan Altima key fob won't work


There is a special procedure involved in keying your fob to your car once the battery has been changed. You must lock and open the door with your key. Turn the ignition to "on"(not start) then push the fob's open and close button, then shut off ignition. This procedure is done everything the key battery is changed. Hope this can help you!
------------
Motorcycle Diagnostic Scanner

Oct 31, 2012 | Cars & Trucks

1 Answer

2009 altima doesn't recognize key all the time


Nissan been having some problem with key FOB, they don't wont to acknowledge it cause it will turn into a RECALL expensive fix for them.

Sep 21, 2012 | 2009 Nissan Altima

1 Answer

Keyless entry remote wont progam


It will not unlock the door the first time you push the button. This only registers the key fob ID into the computer. When you press the button on the key fob, press it only once and wait for the hazzard lights to flash twice again. Then open the driver's door. The key fob will not become active until you open the driver's door.

If your hazzard lights do not flash after you press the button on the key fob, there is most likely a problem with the key fob. Either it is not the correct key fob for your vehicle, or the battery is not in correctly or the key fob is defective.

The only other advice I can give you is to have it programmed with a scan tool. This way, the scan tool can verify that the computer in your vehicle is receiving the signal from the key fob.

It can be done either way, but if the "no scanner" way does not work, the rest of the system should be checked for possible problems.

Dec 12, 2011 | 2005 Nissan Altima

2 Answers

I activated alarm and car will not start,. How to deactivate alarm and start car? I have a 98 Nissan Altima


ON NISSAN MANUALLY LOCK ALL DOORS THEN UNLOCK THE PASSENGER DOOR WITH THE KEY THEN THE DRIVER DOOR THEN PRESS AND HOLD THE BRAKE PUT KEY IN IGNITION THE CAR SHOULD START NOW THIS RESETS THE ALARM

Aug 02, 2011 | 1998 Nissan Altima

1 Answer

Sorry my car was not listed so picked Altima 2003 Micra Intelligent key fob not working properly. Can drive the car but cannot open or lock the doors. Did get fob wet. Now dried out. Worked for first few...


You are going to need to check the power lock control moduel on the inside of the door panel. If the FOB appears to be working but the doors are not unlocking, you need to check this. I would also replace all fuses that control the locks. If both of these devices check out ok, you may need to replace your FOB. To check your power lock control moduel, manually lock and unlock your doors by pressing the lock button on the inside of the door. If it does not work, it is either the fuses or the power lock control moduel. If it works, your FOB has gone bad. Hope this helps! Please rate 4 thumbs up!

Apr 18, 2011 | Nissan Altima Cars & Trucks

Not finding what you are looking for?
2011 Nissan Altima 2.5 Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...