Question about 2004 Toyota Sienna

Open Question

Reset the error message - 2004 Toyota Sienna

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the displayed messages in the EVIC for a 2011 Jeep Grand Cherokee$


sCAN IT
GET THE DTC errors
the read the FSM for that error and do the tests for that problem and correct it,
then using in scan tool reset it. bam down.

but wait no messages stated. could be just be the normal service messages.? like change oil?
or tires low. or? the glove box. operators guide.
open it and read the page on EVIC errors. bingo, its all covered there.
if it is serious error, see my first paragraph here.

Oct 19, 2014 | 2011 Jeep Grand Cherokee

1 Answer

Reset error code


Hi Lucky, I suggest that you have a technician come around and carry out a diagnostic scan on your vehicle. It may be a safety fail safe system stopping the vehicle from starting if there is a problem with the steering. The read out and error message means there is a problem which needs attending to and simply canceling the code will not solve the problem which has caused the warning. Regards John

Jul 20, 2013 | Audi Cars & Trucks

1 Answer

How to reset error messages in 06 ridgeline


do you have button to reset or need OBDII scanner.

Feb 26, 2013 | 2006 Honda Ridgeline

2 Answers

How do i get rid/ reset message xc90 "transmission service urgent" i have already taken to volvo dealer about six months ago. they could not pin point issue on diagnostic. Cheers


You first have to retrieve fault codes from your computer network then you have to diagnose the systems/circuits indicated by the fault codes to determine what the cause of the failure is, then you must repair the system/circuit at fault and then reset the computer system. If the dealer cannot do this, I don't know who can. Did they tell you what fault codes they were getting? If so, we can look up the troubleshooting charts for those codes as well as do a Technical Service Bulletin (TSB) search to see if this is a known problem with a known fix. Without the codes, your guess is as good as mine.

Sep 11, 2011 | 2004 Volvo XC90

2 Answers

Hi, i have message appeared on dashboard volvo v50 2.0d 2005 "engine sistem service required", could you tell me what is that mean. thanks


Millage service message can be reset without dealer tools. However this is an error message. You need diagnostic tool to check the error code. All you can do right now is to enter hidden menu and check which module is reporting issue (DTC code).

Apr 25, 2011 | 2006 Volvo V50

1 Answer

I have a 1999 honda odyssey, the radio needs to have the reset number put in, but it says radio err.. anyway to reset it so i can put in the code??


yes if you have the code and the display reads error then you need to reset the audio unit. to reset you can disconnect the neg and pos battery cables hold them so they are touching each other for approx 30 seconds. reinstall cables and the error message on the audio unit sounds be cleared and you can now enter you code. if it still reads error then there may be internal damage to the audio unit- hope this helps

Dec 12, 2009 | 1999 Honda Odyssey

1 Answer

Bose 6 cd changer factory installed will not function.


Some people with this issue have had some sucess disconnecting the negative battery cable for 10 minutes to reset the stereo. After re-connecting the battery, the stereo should reset and the error message should clear at which point the CD player should also function. Apart from this, a service call at a dealer or a car stereo repair specialist are the only alternatives. Best of luck.
Greg

Jun 14, 2009 | 2002 GMC Envoy

2 Answers

Ford Expedition 2003 6 CD changer contianing 6CD's says CD error


Try unhooking the battery for 5 minutes to reset the stereo

Feb 25, 2009 | 2003 Ford Expedition

1 Answer

Acura TSX 2005 radio code


I had the same problem when I had my battery replaced. I guess the mechanic tried to enter the code.... and after 10 tries he failed of course, and the system locked itself and gave the ERROR message.
All you need to do is leave the system on for an hour (Yes, leave it on... meaning you most likely need to drive around for an hour... and sit in the car for an hour doing nothing....) Then the ERROR message will change back to CODE (you will hear a long beep)
Now you can enter your code. Remember do it slowly. Enter the key 1 by 1... Do not input quickly, otherwise it will not work
Hope this helps!

Feb 23, 2009 | 2005 Acura TSX

Not finding what you are looking for?
2004 Toyota Sienna Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...