Question about 1994 Acura Legend
IF YOU LOOK UNDER DRIVERS SEAT FROM BACK PASSENGER SEAT YOU'LL SEE THE CARS ECU IS MOUNTED THERE. THERE WILL BE A SMALL LITTLE "WINDOW"ON BACK EDGE THAT WHEN YOU TURN THE KEY INTO THE ON POSITION ANY TROUBLE CODES WILL CAUSE A RED LIGHT TO BLINK IS THIS WINDOW. THE SERIES OF FLASHES(LONG FLASH=10 SHORT=1) WHICH TRANSLATE INTO DTC . EXAMPLE TWO LONGS FOLLOWED BY 3 SHORTS ==DTC 23. IF THERE ARE MORE THAN ONE DTC STORED THERE WILL BE LONG PAUSE BETWEEN EACH SERIES OF FLASHES
Posted on Aug 07, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
IT IS LOCATED BEHIND THE GLOVEBOX. JUMP THE CONNECTOR AND COUNT THE FLASHES OF THE CHECK ENGINE LIGHT. HOPE THIS HELPS, LET ME KNOW. BEST OF LUCK TO YOU.
Posted on Apr 30, 2009
turn the ignition key to the acc or lock position with the odometer reading showing.
while holding the trip/reset button turn the ignition to the on position. light should flash and go out!
reset done. if you have any more issues plese ask. good luck
Posted on Sep 25, 2009
SOURCE: fuel pressure for a 89 Acura
Your fuel pressure should be 35-41 psi with your vacuum hose disconnected from pressure regulator and you can attach pressure gage at the bleeder vent on top of the fuel filter make sure your pressue gage is intended for fuel not air.
Posted on Jul 27, 2010
Tips for a great answer:
Jul 19, 2014 | 1989 Acura Legend
Dec 27, 2012 | Acura Legend Cars & Trucks
Oct 01, 2010 | 1993 Acura Legend
Jun 07, 2010 | 1989 Acura Legend
May 09, 2010 | 1989 Acura Legend
Feb 23, 2010 | 1989 Acura Legend
Sep 25, 2009 | 1992 Acura Legend
Sep 17, 2009 | 1988 Acura Legend
Apr 29, 2009 | 1994 Acura Legend
Aug 19, 2008 | 1995 Acura Legend
Feb 20, 2015 | 1994 Acura Legend
346 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: