Question about 1996 Ford Thunderbird LX

Open Question

Size brake lines - 1996 Ford Thunderbird LX

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake Line


Cut the damaged section off with a line cutter and take it to the parts store for sizing, and brass compression fittings to attach it to the lines in the car.

Feb 24, 2014 | Cars & Trucks

1 Answer

1999 Olds intreage steel brake line size


No one actually answered the question. What size it is??

Aug 12, 2012 | 1998 Oldsmobile Intrigue

1 Answer

What size brake line does a 1997 honda passport have?


It depends on WHICH brake lines in the 1997 Honda Passport you are talking about. The easiest way to find out is to MEASURE the brake line that you want to know about. A caliper-type measring device is a good tool for this. Sometimes I use an adjustable (crescent) wrench and adjust it to the size of the line, then measure the distance between the wrench jaws with a ruler.

May 26, 2012 | 1997 Honda Passport

1 Answer

The brake line needs to be replace but don't know what size to get


3/16" Brake line. It can be bought in 3'-5' lengths with fittings or in 25-50' spools. The straight lengths come with fittings. Make sure to purchase the japanese/metric style. This makes a difference in the threads of the fittings.

Feb 08, 2012 | 1995 Nissan Maxima

1 Answer

1988 Dodge Dakota brake line size question


they should be 3/16" but if you want to be sure, take a quarter inch wrench and put the open end over the line if it is sloppy on the line it is 3/16" , if it fits nicely, it is 1/4" . that is the only two sizes they could of used.

Jun 06, 2010 | 1988 Dodge Dakota

1 Answer

Where can i find a manual on how to replace the brake line on a 02 chevy s10 xtreme?


I'm not aware of a particular Manual that specifically addresses Brake Line for your Specific Vehicle.
However I have replaced several "complete" and "partial" Brake Lines in my years of experience.
Specific/Pre-Contured Brake Lines for your Truck are available at most auto parts stores. Calt them for availability and prices.
However these are somewhat expensive. YOU CAN 'MAKE' YOUR OWN LINES!
Also available at these auto parts stores are two (2) tools you can buy.
1) A Brake Line Bending/Shaping Tool.
2) A Brake Line Cutting/Flaring Tool.
These tools are very easy (and fun) to use.
The auto parts stores carry "Straight" "Bulk" Brake Lines in different sizes (lenght and diameter). They also carry Brake Line "male" and "female" Brake Line Connectors. Make sure you purchase the correct diameter size Brake Line and the correct Connectors to fit these Brake Lines.
If the original Brake Line that you are replacing has viable (usable) sections and/or connectors you can use, then use them.
Take the old Brake Line off using a flare wrench.
Check your Brake Line Connectors to see if they will properly connect to your remain system.
Measure this piece with a material measuring tape (don't tell momma!). Measure the straight Brake Line and using the Brake Line Cutting Tool, cut the straight bulk Brake Line. Using the old Brake Line as a reference: use the Brake Line Bending Tool to shape the straight bulk Brake Line into the desired shape, matching as close as possible to the original Brake Line.
BEFORE USING THE BRAKE LINE FLARING TOOL:
Place the proper "male" or "female" connectors onto the line, FACING the proper directions.
Using the Brake Line Flaring Tool: Flare the ends of the Brake Line.
Connect the "new" Brake Line using the flare wrench.
Make sure you Bleed the entire Brake System.
Let me know if this helped, or if you have any additional information or questions. Feel free to contact me at FixYa.com!
ps: Make sure you clean, roll-up and put away that material measuring tape!!

Feb 12, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

Flare nut wrench size?


try metric size. a flare wrench is an closed end wrench with a little **** in big enough to to slide over the line and then around the bolt its grabs mor of the bolt than a regular wrench

Dec 13, 2008 | 1992 GMC Sierra C3500

1 Answer

Brake line replacement


what i usually do if the money is available is purchase the brake lines in all sizes from the auto parts store and return any unused parts to the auto parts store,for a refund. they usually know the sizes you need ; you could also do the front first then the rear, or replace one line to get the size, also need a tubing bender to bend the brake lines, 'bleeder screws are usually three choices or go to ford or mercury, once you get started its not too bad, beware of compression fittings (unsafe to do it that way) Good Luck .

Sep 09, 2008 | 1996 Mercury Cougar XR7

2 Answers

Brake line for a ford taurus gl 3.0 v-6


most brake lines are 1/8"(0.125) suprised parts store couldnt cross reference for you generally you can buy the line prefab with all fittings the right bends and length alot easier to install hope this helps

Aug 31, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
1996 Ford Thunderbird LX Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...