Question about Cars & Trucks

1 Answer

My 2000 Ford ranger wont start My 4x4 lights started flashing so I pulled and checked the fuses but all were good Then went to start the truck and all I hear is the relay click one time as I turn the key and all the interior lights and radio go out till I let go Then the 4x4 lights quit flashing and will engage but the truck wont start or even attempt to crank and there is no sound from the stereo even with it turned all the way up

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Cars & Trucks Expert
  • 226 Answers

Suggest you look at battery 1st Remove Earth cable normally + sign, check the cable connection to the battery is clean inside & wire brush the battery where the cable fits see if that is your problem, only other thing is the battery no longer holding it's charge IE: you may need new battery. Best Wishes, Malcolm Campbell.

Posted on Jul 03, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76630 Answers

SOURCE: shuts off while driving. no fuel pressure. pcm fuse blows/ fuel pump relay inserted.

Sounds like the fuel pump is shorted.

Posted on Nov 03, 2008

  • 35575 Answers

SOURCE: My 2000 Ford ranger wont start My 4x4 lights

The battery may be due for replacement.

Posted on Apr 12, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 ford ranger 3.0 flex fuel my 4x4 dont work the 4x4 hi and lo lights blink 6 times every 2 mins and i have a new shift motor on the truck idk why it wont go into 4x4 dosent ven make a noise please...


Okay, there are a few reasons that this could happen, one being the selector motor which you have replaced so lets go to the next thing which is the fuse, when the motor goes bad it will blow fuse sometimes so check all fuses even under the hood fuse box, i think its a 20 amp fuse but test all of them.

The next problem could be a bad ground, run a new ground wire from the front diff to the frame of the truck.

try these tests and let me know the out come then we can move on, good day, also there is a lot of info on this problem on the web, type in 1999 ranger blinking 4x4 lights, good day

Oct 14, 2012 | 1999 Ford Ranger SuperCab

1 Answer

2003 ford ranger cranks but will not start


That is the ignition module associated with the dist. if so equipped. If no distributor, cold be electronic spark block fro spark distribution.

May 15, 2017 | 2000 Ford Ranger SuperCab

1 Answer

After getting a jump-start, my entire radio/cd player went out in my 2000 ford ranger. It's a stock Ford unit. Won't come back on. Is it a fuse?


it sounds like it could be a fuse. double check in your owners manual where the fuse is located and double check if there is more than one fuse for the radio or it may have a fuse for the amplifier too.

Nov 19, 2010 | 2000 Ford Ranger SuperCab

1 Answer

I have a 1994 ford ranger 4x4. I can start it but i have no interior lights, power to the stereo, turn/hazard lights, but have brake and dashboard lights. no fuses are blown.


I think you'll have to revisit the fuse box (there may be more than one 1 ) The problem you describe are linked circuits and a thorough inspection of the fuse box is needed. Good luck

Dec 02, 2009 | 1994 Ford Ranger Supercab

1 Answer

2000 Ford Ranger XLT Automatic trans. 4X4 3.0L


Check your operator's manual. Make sure any and all fuses that have anything to do with the affected items are not blown and are working properly. If you can; check for loose fuse connections or wires. Hope this helps. God bless!

Nov 04, 2009 | 2000 Ford Ranger SuperCab

1 Answer

94 ford ranger blowing fuses when i turn on headlights


I would check the trailer light wiring to make sure it doesnt have any wires that are exposed or touching metal.Odds are that is what is causing the fuse to blow

Apr 23, 2009 | 2004 Ford Ranger

1 Answer

!998 ford ranger stuck in 4x4


sounds like it's the motor is going bad or has a bad connection, try cleaning the connector if there isn't any gunk in the connector, check the manual see if there is a ohmn test you can run on the motor, if not i'd replace the motor.

Mar 19, 2009 | 1998 Ford Ranger SuperCab

1 Answer

OD light flashes .


Sounds like the transmission fluid is getting too viscus. Might want to check it, or replace it. I would just get the trans fluid replaced. Costs 80 dollars or can dIY for 25-30$

Jan 12, 2009 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...