Question about 2002 Pontiac Montana

Open Question

What color is the power wire for power window switch

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wire color position for 2002 Nissan Altima window switch


Normally I recommend anyone serious about working on their VEHICLES purchase the FACTORY+WORKSHOP+MANUAL.

Luckily you will find BBB Industries has your circuit drawings ... wire colors and numbered tabs... to assist in-screwing what ever is BROKEN NOW...

You have "auto" up/down and the DRIVERS DOOR get a little less use than the SAFEWAY STORES front door...

Go to bbbind.com... wade thru the registry... go to their wiring and technical service bulletins...

Re-check that you are in "WIRING DIAGRAMS"...
"BODY & Accessories" and go to "POWER WINDOWS".. you are there...
BBB Industries Premium Alternators Starters Power Steering Products

I'm good with all the "color" letters but "L"
(I'm guessing "lime" trace??)...

You tell me... Hope this helps!!

Oct 19, 2016 | 2002 Nissan Altima

1 Answer

Power windows don't work


I can provide wiring diagrams and locations however I need to know what size motor you have. The 2.0L or 2.5L.

Thanks in advance

Jul 04, 2008 | 1989 Toyota Camry

1 Answer

Where are power switch for window control 03 Aztec


I would check the wiring harness going into the driver side door, on the hinge side. The wire harness probably has a protective rubber boot covering, see if you can move cover back so you can see wire colors. The yellow wire is voltage for power window master switch. Black wire is ground. The wire harness is flexed every time the driver door is opened or closed.

I looked at info for Pontiac aztek.

Nov 25, 2015 | Cars & Trucks

1 Answer

Color coded wiring diagram 1995 gmc sierra electric windows


Google the
wiring diagram 1995 gmc sierra electric windows I found several systems offering what you require.
But what is the problem, 99% of the time in that year the window regulator was at fault, it was made from a stapped steel housing verses an cast unit. We check the left switch for power, disconnect the two wire connector at the motor, and see if the motor has power to one side or the other in the connector. If the switch has power to it, and the motor has power to it as you press the button, the motor is at fault.

Good luck.

Mar 16, 2015 | GMC Cars & Trucks

1 Answer

1987 gmc power window switch wiring diagram


I NEED TO KNOW WHAT COLOR WIRES GO WHERE TO THE POWER SWITCH FOR THE PASSENGER WINDOW I HAVE NEW SWITCH BUT NO IDEA WHERE ETHE WIRES GO TO WHAT PRONG.
AND ITS RAINING!

PS 1987 GMC SARFARI PASSENGER SIDE POWER WINDOW

Oct 06, 2012 | GMC Cars & Trucks

1 Answer

I need help with wire connections for power window switch on olds ciera front passenger door.what color wire connects it to master switch?


In the diagram, the brown wire is voltage for power windows. Goes hot when you turn on the key. Voltage comes from the power window circuit breaker. The black wires in the middle of diagram are ground. Use a testlite to check voltage on brown wire, key on. If the brown wire has voltage, to check the black wire for ground, use a testlite between brown wire and black wire. If lite comes on, you have voltage and ground.
10_15_2011_2_58_23_am.jpg

Oct 15, 2011 | Cars & Trucks

2 Answers

1997 Chevy Lumina, I replaced the passenger side power window motor due to the factory one failing, The person before me cut all the wires going to the motor and toggle switch in their attempts to fix /...


There is a wiring harness on hinge side of passenger door correct, take a look at the wiring colors. Hope you can read it. At the window switch, the outside wire on either side is voltage or ground depending on which direction, up or down, reversing motor. You don't need the window switch for testing, you should be able to operate from driver door master switch. If you get the wires reversed, the only thing that will happen is, up will be down and down will be up, if that happens, reverse the wires. Just my opinion.
At the window switch, top middle wire is lockout, so only the driver can operate the windows.
power window-jlrraf3b1gxaofzrmafkiszu-5-0.jpg

Apr 26, 2017 | 1997 Chevrolet Lumina

1 Answer

2000 pontiac grand am power window switches do not work fuse good, wire colors purple brown green and 2 blue which wires will allow me to bypass switch and roll up window


did you check wires between door and door jam by hinges possible broken wires you have to pull out covering (rubbercover) to get access

Apr 06, 2010 | 2000 Pontiac Grand Am GT

1 Answer

99 Trans Sport Power windows not working


Check the wiring in the door opening you likely have a broken wire or 2 in the rubber bellows.I think the wire color is orange/black stripe.

Apr 26, 2009 | 1997 Pontiac Trans Sport

3 Answers

Master power window switch


no but i alway do it like that the window that not working push button uut and jump power to different wire just quick toucht you dont whant to blow fuses it gonna go up cherrs pierre

Jun 29, 2008 | 1998 Chevrolet Malibu

Not finding what you are looking for?
2002 Pontiac Montana Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...