Question about 1987 Ford F 150

Open Question

Fixing a headlight switch on a Mazda B2500

Do I have to remove the dashboard to get at the switch?

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 508 Answers

SOURCE: remove dashboard on a 88 ford bronco 2

You don't need to remove the dash. Look under the dash where the switch is located. on the side of the switch you will see a small button to push in. While pushing in on the button pull the knob as though you were going to turn the lights on. At this time the stem should release from the switch. Undo the bezel and drop the switch down so you can see to unplug the wires. Replace wires to new switch and reverse the procedure to install. You don't need to push the button in when replacing the stem.

Posted on Feb 07, 2009

Ad
emissionwiz
  • 76051 Answers

SOURCE: Need fuse diagram for mazda b2500

go to the link below and choose the 1998 ford ranger as the truck, they are the same, then follow the link to ford site and download the 1998 ranger owners manual, the fuse diagrams are in there
http://www.edmunds.com/ownership/howto/articles/120189/article.html

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights and dash lights do not turn on


I would go with the simplist of solutions and suggest that the switch is bad.

Feb 10, 2013 | 1997 Mazda 626

1 Answer

My daughter has bought a mazda 2 during the month of october of last year. after about a month, the dashboard lights has gone very very dim. any solution for this problem


Check the dimmer switch position or possibly you have a bad dimmer for your instrument panel lights could be found with headlight switch knob or a separate adjustment on dash.

Feb 06, 2011 | Mazda MAZDA2 Cars & Trucks

1 Answer

Half the dash lights are out on my mazda b2500


There are several small screws to remove. It doesn't take long once you've done it and know where they are located. First you must remove the center console--there are two screws (i think 7mm or 8mm) underneath the middle part kind of hidden from view on the center console. Then remove the lower plastic panel under the steering wheel. Then a metal panel must be at least loosened enough to reach the lower screws on the dash panel you're trying to get at. Then there are three more screws along the top ledge that must be removed. Then you can get to the bulbs. I think there are 5 in there, and two in the center console. It sounds difficult and time consuming, but it only took me like 15 minutes start to finish

Apr 25, 2010 | 2008 Mazda B Series Pickup

1 Answer

The dashboard lights do not turn on with the


operate your instrument panel dimmer switch. If this does not rectify the problem replace dimmer switch

Mar 21, 2010 | 1992 Mazda 323

1 Answer

Need to know if 1999 mazda b2500 has a transponder


if the head of the key is made of black plastic covering it is

Feb 06, 2010 | 1999 Mazda Pickup

1 Answer

Mazda 2 Dashboard Lights


Just rotate the small knob at the left of your dashboard to the right. This will increase the lights of the dashboard.

Apr 07, 2009 | 2007 Mazda 3

1 Answer

Looking for the fuel pump shut-off switch for 1998 Mazda Pickup


The fuel pump shut-off switch is
located in the passenger’s foot well,
behind the kick panel. There is an access hole.

Mar 27, 2009 | 1998 Mazda Pickup

1 Answer

Dashboard Lights will not go on Mazda Pickup B2500 1999


As long as all fuses are good, you need to check the light switch its self. Remove the light switch assembly from the dash. With a 12 volt circuit tester, check the wiring coming out of the switch. The dash lights will be powered along with the side marker lights.

Probe each wire that joins the switch, turning the switch on and off. If you don't have any loss of power here, it can be at the printed circuit board at the dash.
Bill

Nov 19, 2008 | 1999 Mazda Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...