Question about Audi A4

Open Question

Diagnosis trouble codes p0337

How do i fix it

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dsacco86
  • 1077 Answers

SOURCE: Car won't start and has 4 codes (P0337,P609,P1164,P2670)

Ignition System or Misfire
P0337 Crankshaft Position Sensor A Circuit Low Input
Computer Output Circuit
P0609 Control Module VSS Output "B" Malfunction

P1164 Air/Fuel Ratio (A/F) Sensor (Sensor 1) Range/Performance Problem

Sorry I can't find the last code for you. It seem to me the main computer (P0609) maybe the big issue here. So it would be best to have a ASE Mechanic work on this. He would have the proper computer type tools for fixing this problem.

Posted on Apr 13, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0011 jetta 04 need fix? thank you


Please click the link below for information on diagnosis and testing for this fault code and possible causes..
P0011 OBD II Trouble Code Camshaft Position Timing Over Advanced or System...

May 12, 2017 | Cars & Trucks

1 Answer

Fixed trouble codes on 2007cobalt.broken valves on


come back with the codes that are now showing to give us some idea as to where to look for a diagnosis.

Oct 01, 2014 | Cars & Trucks

1 Answer

How to fix airbag light on hyundai matrix wont go off


The seat belt and air bag problems may be connected.
You would need to get the body computer scanned for trouble codes to proceed with diagnosis. Once the problem is fixed the warning light should stay off.

Mar 03, 2013 | Cars & Trucks

1 Answer

P0337 code 2007 hyundai


the code is for a crankshaft position sensor

Jun 09, 2012 | Cars & Trucks

1 Answer

P0337 Crankshaft Position


You forgot to mention what kind of vehicle you were talking about.

However, I posted an answer for this on the other question that you posted for this same problem. So, fo the benifit of other people searching this site, I am reposting the answer I gave:


Diagnostic Test Code (DTC) P0337 is not a valid code for a 2002 Mitzubishi Lancer. However, if you are using a generic OBD code reader to get this code, there may be another "vehicle specific" crankshaft position sensor code that the code reader does not have a definition for and is rendering it as a P0337.

The generic definition for this DTC is "Crankshaft Position Sensor [A] circuit low input". This can be caused by a defective crank sensor, loose or corroded electrical connectors between the crank sensor and the PCM, defective PCM, or mechanical problems that can cause erratic crank sensor signals like timing component problems or bad crankshaft main bearings.

In your case, I would think that the noise is causing the crank sensor code. The crank sensor code is not causing the noise. There may be loose timing components that are hitting the crank sensor or something to that effect.

Dec 23, 2011 | Cars & Trucks

1 Answer

P0337 code


Diagnostic Test Code (DTC) P0337 is not a valid code for a 2002 Mitzubishi Lancer. However, if you are using a generic OBD code reader to get this code, there may be another "vehicle specific" crankshaft position sensor code that the code reader does not have a definition for and is rendering it as a P0337.

The generic definition for this DTC is "Crankshaft Position Sensor [A] circuit low input". This can be caused by a defective crank sensor, loose or corroded electrical connectors between the crank sensor and the PCM, defective PCM, or mechanical problems that can cause erratic crank sensor signals like timing component problems or bad crankshaft main bearings.

In your case, I would think that the noise is causing the crank sensor code. The crank sensor code is not causing the noise. There may be loose timing components that are hitting the crank sensor or something to that effect.

Dec 23, 2011 | 2002 Mitsubishi Lancer

1 Answer

ABS light comes on... but no noticble degradation in operation etc.


Most likely a wheel speed sensor, hopefully... The only thing that will change when the ABS light is on is that the ABS will not function as long as the indicator is on. I hope this info helps.

When the airbag system is in functioning condition, the airbag warning light will remain on for about 7 seconds and go out when the ignition switch is set to ON .

If there is any malfunction, the airbag warning light will either stay on or off continuously. In such cases, perform on-board diagnostic in accordance with the specified procedure to determine trouble codes.


  1. Turn ignition switch ON (with engine OFF ).
85091723



  1. Connect DIAG. terminal to No.2 terminal of diagnosis connector located inside lower cover.
  2. Check in accordance with the trouble code indicated by the AIRBAG warning light, and record the trouble codes.
  3. Turn the ignition switch "OFF " and remove the DIAG. terminal from No.2 terminal of diagnosis connector.
85091724


HOW TO READ TROUBLE CODES
The ABS lamp flashes a code corresponding to the faulty parts.

The long segment (1.2 secs on) indicates a "ten", and the short segment (0.3 secs on) indicates a "one".





NOTE: This is the only information provided by the manufacturer for clearing diagnostic trouble codes.

97511505


CLEAR MEMORY
After eliminating problem as per trouble code, clear memory as follows:

Make sure ignition switch is ON (and engine off). Connect one DIAG. terminal (1) on diagnosis connector (2) terminal No.1.

where warning light is flashing, connect the other DIAG. terminal (3) on terminal No. 2 for at least three seconds . After memory is cleared, normal warning light flashing rate resumes. (Warning light flashes every 0.6 seconds (ON-OFF operation.) Memory cannot be cleared if any problem exists.

After clear memory and then DIAG. terminals (1) and (3), extract from diagnosis connector (2)

Jul 27, 2011 | 1999 Subaru Legacy

1 Answer

ABS light is on. It needed a left front wheel bearing which I replaced. How do you reset the ABS light.


Here is the procedure for clearing ABS codes, the connector is up under the drivers side dash, it may be taped to another harness so just rip/cut the tape and pull down until you can see what your doing. Just FYI, the ABS module only holds 3 codes max in its internal memory even if there are 4 or more codes existing. Those other existing codes will not show up until you fix a concern, clear the codes, and if the light is still on all that means is that you just made room for another code to show up. As long as you only have the one code, you'll be fine. But if you had 3 codes, and you clear them, all the codes for the problem you fixed will be gone but now new codes may be there.
I hope this info helps!~subyguru~Clearing Memory

86430974


  1. After calling up a trouble code, disconnect diagnosis connector terminal 8 from diagnosis terminal.

86430975


  1. Repeat 3 times within approx. 12 seconds; connecting and disconnecting terminal 8 and diagnosis terminal for at least 0.2 seconds each time.
NOTE: After diagnostics is completed, make sure to clear memory. Make sure only start code (11) is shown after memory is cleared.

Jun 14, 2011 | 2000 Subaru Outback

1 Answer

P0337 Code 2001 Deawoo Lanos


its a crank sensor no signal p0337.good luck,i hope this help pls dont forget to rate me thanks

Jun 05, 2009 | 2001 Daewoo Lanos

1 Answer

Car won't start and has 4 codes (P0337,P609,P1164,P2670)


Ignition System or Misfire
P0337 Crankshaft Position Sensor A Circuit Low Input
Computer Output Circuit
P0609 Control Module VSS Output "B" Malfunction

P1164 Air/Fuel Ratio (A/F) Sensor (Sensor 1) Range/Performance Problem

Sorry I can't find the last code for you. It seem to me the main computer (P0609) maybe the big issue here. So it would be best to have a ASE Mechanic work on this. He would have the proper computer type tools for fixing this problem.

Apr 12, 2009 | Toyota ECHO Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...