Question about 2005 Chrysler Town & Country

1 Answer

LR DOOR WILL ONLY OPEN TO A POINT AND STOP

Electric Sliding on right side will only open to a point and stop when opening. WHEN CLOSING IT GOES TO THE SAME SPOT AND STOPS. THEN IT HAS TO BE MANUALLY OPENED OR CLOSED. I cannot fine an obstruction. the other doors wok fine.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had a similar problem with my 2007 Town and Country. It would start to open and stop but then nothing. There is a plastic linkage track that houses some wires and one of the black wires was broken about 5 links from the door. After I repaired it everything worked fine.

Posted on Jul 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Why isn't my right sliding door not opening or closing


If sliding door is electric, that's where I would start, check the electrical circuits for voltage and ground. If that checks out, the issue may be mechanical?
Your owners manual should give you some operational info for the sliding door.

Mar 06, 2015 | 2001 Ford Windstar

1 Answer

Dodge caravan sliding door


be looking at the control relay switches for that door..also look for the door to be off track,, this may be putting it in a bind..

Dec 23, 2013 | 2008 Dodge Grand Caravan

1 Answer

The power side passenger door for a 2001 Chevy Venture van works every so often. The door doesn't move when the button is pressed on the panel in the headliner. The key remote doesn't work most of the time...


The proper way would be to look at a wiring diagram an test the electrical circuit's with a DVOM - digital volt ohm meter . Do you know how to test automotive electrical circuit's ?
Electric Testing Techniques You Need to Know
The Trainer 32 How To Read An Automotive Block Wiring Diagram
Free wiring diagrams here http://www.bbbind.com/free_tsb.html
Enter the vehicle info. year , make model and engine size . Under system click on body & accessories ,then under subsystem click on power sliding door . Click the search button then the blue link. Looking at the diagram you will see a control module is used .
Also reading factory service info. on how it works would be a good idea.

Rear Side Door Actuator Control Module
The rear side door actuator control module is capable of on-board diagnostic functions described in On-Board Diagnostic Features . The rear side door actuator control module monitors the door position at all times including during manual operation. After activating the on-board diagnostic modes, loosing battery voltage, or ground to the rear side door actuator control module the Power Sliding Door (PSD) Re-Initialization procedure must be performed in order for the rear side door actuator control module to correctly determine the door position.
Power Sliding Door System Description
The power sliding door system(s) can operate correctly only if the power sliding door is in proper mechanical condition. Any mechanical problems will affect the power sliding door operation and must be repaired before attempting to diagnose the power sliding door system. Manually open and close the power sliding door to determine if the door moves smoothly and without excessive resistance or binding. The power sliding door must also latch and unlatch without the use of excessive force. At any time during power sliding door open or close operation, excessive resistance to the door movement will cause the power sliding door to stop and reverse the direction of travel.
The power sliding door will operate only when the power sliding door on/off switch in the overhead console is in the on position. At anytime during power sliding door operation the on/off switch may be turned to the off position and the system will quit any function in process. The power sliding door will not open unless the transmission shift lever is in the park position and the door is unlocked. When the sliding door security lock is in the locked position the power sliding door will not open from the inside. The power sliding door close function will operate when the vehicle is in gear. The power sliding door module uses the VSS signal to determine if the vehicle is moving during a power sliding door close function. The momentum of the vehicle moving forward adds resistance to the door closing operation. When the rear side door actuator control module determines the vehicle is moving forward while closing the door, current flow through the actuator motor is increased instead of being reversed. The VSS signal circuit is supplied battery positive voltage through a resistor then monitored within the rear side door actuator control module. The VSS signal circuit is then pulsed to ground, or pulled low by the powertrain control module in relation to vehicle speed. The sliding door alarm will sound repeated short tones whenever the power sliding door system is turned on and the door is open while the transmission is out of park.
When the power sliding door system is on and manual operation of the power sliding door is detected the rear side door actuator control module activates the power assist feature. When the power assist is activated the power sliding door will continue to open or close without any further manual effort.
The power sliding doors may be operated using the Remote Keyless Entry System. The keyless entry transmitter will have one OPEN/CLOSE button with a van symbol on it for each power sliding door. The power sliding door ON/OFF switches in the overhead console must be in the ON position in order to operate the power sliding doors using the keyless entry transmitter. When a right hand power sliding door OPEN/CLOSE function is activated using a keyless entry transmitter the exterior lights will flash once indicating the RKE module has received the OPEN/CLOSE command. When activating a left hand power sliding door OPEN/CLOSE function with the keyless entry transmitter the exterior lights will not flash.

On-Board Diagnostic Features
The left and right power sliding door systems operate as independent systems. The on-board diagnostic modes are entered and operate the same in both systems.
The power sliding door systems are capable of the following on-board diagnostic functions:
• Diagnostic Mode 1: An audible signal indicates the diagnostic trouble codes stored by the rear side door actuator control module.
• Diagnostic Mode 2: An audible signal indicates when inputs to the rear side door actuator control module are active.
• Diagnostic Mode 3: Performs an output test of the sliding door unlatch actuator.
Entering On-Board Diagnostics
The on-board diagnostic modes can only be entered in a sequential order from modes 1-3.
• Enter the right power sliding door system on-board diagnostics using the right B-pillar open/close switch and the right on/off switch in the overhead console.
• Enter the left power sliding door system on-board diagnostics using the left B-pillar open/close switch and the left on/off switch in the overhead console.
1. Both power sliding doors must be closed and in the latched position.
2. Place the ignition switch in the OFF position.
3. Place the on/off switch in the overhead console to the OFF position.
4. Press and hold the B-pillar power sliding door open/close switch.
5. While holding the open/close switch, operate the on/off switch through 10 ON and OFF cycles within 10 seconds stopping in the on position.
6. The sliding door alarm will sound 1 long tone indicating diagnostic mode 1 is active.
Diagnostic Mode 1
Upon activating diagnostic mode 1, DTCs will begin to be signaled by the sliding door alarm. The DTCs are 2 digit codes and the codes are represented by the number of buzzes for each digit of the code number. For example a DTC 12 is represented with the following sequence: buzz, pause, buzz, buzz, long pause. Each DTC will be signaled 3 times before proceeding to the next DTC. Refer to Diagnostic Trouble Code (DTC) List . The DTCs will continue to be repeated in this manner until the on-board diagnostics are exited or mode 2 is entered. When exiting the on-board diagnostics all stored DTCs will be erased from the rear side door actuator control module memory.

Oct 13, 2017 | 2001 Chevrolet Venture

1 Answer

The right side sliding door of my 2005 voyager is not workingat the begining trying to open it partialy worked mean the when i presed the the open/close button the door started moving but on a specific...


hi

this is because of the track in which the door slides.there is something in the path or the track got damaged which prevents the door sliding after a certain limit.
the wiring harness and the motor are seems to be in good condition becausethe door works til certian point.so the problem is with the track only.

if my answer was usefull please vote

Jun 27, 2010 | 2005 Dodge Caravan

1 Answer

Side door won't open with electric switch


Check the fuse, if it's blown, replace it. Check the switch as well. If this was at all helpful, please rate. Thanks for asking.

Jun 30, 2010 | 2005 Dodge Caravan

3 Answers

2007 Chrysler Town and Country Sliding Door Problem


The wire that provides power to your door is split in half. This is caused by normal usage and results in lose of power when the door opens or closes and causes wire to twist which splits the two ends resulting in lose of power in only one location.
You can fix it by following the post by "grimmster" and "lane" on the following web forum (scroll to the middle of the forum to see their solution). This should only cost $10 bucks (need electrical tape; soldering iron and wire from Home Depot) rather than hundreds at the dealer:

http://forum.chryslerminivan.net/showthread.php/4555-02-T-amp-C-power-sliding-door-issue?p=49202

Mar 24, 2010 | 2007 Chrysler Town & Country LX New Cars

2 Answers

Power sliding door opens part way


Replace the wire track harness in the lower door opening.

May 29, 2009 | 2005 Dodge Caravan

1 Answer

Power sliding doors on mini van opens but start closing as soon as it gets to the full open position you have to push on it to get it to stop, a small child might get stuck.


If the door opens up right away that generally means there is debris is in the bottom where the door slides on by the roller track. If the driver side door does not open electrically the fuel lid is not centered. The lid has a switch on it.

Sparky

Aug 07, 2008 | 2003 Ford Windstar

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...