Question about 1988 Toyota Lite-Ace

Open Question

Toyota van wiper motor remove - 1988 Toyota Lite-Ace

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2002 toyota hiace van front wiper reservoir refill point

I have the 1990 model and just so happened to stumble on its unusual location today as I was replacing the door hinges. On the passenger side open the door and look above the step, there should be a little plastic cap with the wiper icon on it. hope this helps!

Posted on Jul 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you replace windshield wiper motor on a 1997 ford e250 van


REMOVAL
  1. Raise and support the hood.
  2. Remove the windshield wiper pivot arms.
  3. Remove the cowl top vent panels.

25287270-15uk5heqgoha5mc4ejw3dmql-1-0.gif
  1. Disconnect the windshield wiper mounting arm and pivot shaft.
  1. Remove the access cover from the dash panel.
  2. Remove the mounting arm and pivot shaft retaining clip.
  3. Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.

25287270-15uk5heqgoha5mc4ejw3dmql-1-2.gif
  1. Remove the windshield wiper motor.
  1. Disconnect the electrical connector.
  2. Remove the three bolts.
  3. Remove the windshield wiper motor.
INSTALLATION

25287270-15uk5heqgoha5mc4ejw3dmql-1-5.gif
  1. Install the mounting arm and pivot shaft retaining clip on the windshield wiper mounting arm and pivot shaft.

25287270-15uk5heqgoha5mc4ejw3dmql-1-9.gif
  1. Install the windshield wiper motor.
  1. Place the windshield wiper motor in the dash panel.
  2. Install the three retaining bolts.
  3. Reconnect the electrical connector.

25287270-15uk5heqgoha5mc4ejw3dmql-1-14.gif
  1. Reconnect the windshield wiper mounting arm and pivot shaft.
  1. Press on the windshield wiper mounting arm and pivot shaft after it is aligned with the windshield wiper motor.
  2. Install the access cover in the dash panel.
  1. Install the cowl top vent panels.
  2. Install the windshield wiper pivot arms.
  3. Adjust the windshield wiper pivot arms.
This is technically for the V6 4.2L but I'm sure those Ford E250's have the same setup for windshield wiper motor. Let me know how it goes.

Nov 17, 2014 | Cars & Trucks

1 Answer

Fuse wiper washer motor 1996 plymouth


On the mini vans, its a 20amp fuse number 5.
It should be in your owners manual.

Jul 18, 2013 | Toyota Cars & Trucks

1 Answer

2003 toyota sienna van rear wiper not working


Either the linkage from the motor to the arm is broke,or a clip has came off and needs to be put back on.

Apr 26, 2012 | Toyota Sienna Cars & Trucks

1 Answer

Windshild wipers stop working


CHECK FUSE IF FUSE GOOD.HOOK A JUMPER WIRE TO GROUND AND GROUND WIPER MOTOR.TURN WIPER SWITCH ON IF WIPERS WORKS YOU HAVE TO FIX GROUND CONNECTION. IF WIPER STILL DONT WORK.REMOVE THE COWL COVER.TURN WIPER SWITCH ON TO SEE IF POWER GOING TO WIPER MOTOR IF YES.REMOVE WIPER MOTOR HOTWIRE IT.IF WIPER MOTOR DONT WORK REPLACE IT.IF WIPER MOTOR DO WORK CHECK FOR BINDING OR DAMAGE LINKAGES.IF POWER NOT GOING TO WIPER MOTOR AND FUSE GOOD.WIPER SWITCH FAULTY OR IT HAS BROKEN WIRE FROM SWITCH TO WIPER MOTOR.

Oct 04, 2010 | 2002 Toyota Avalon

1 Answer

1988 Pickup: 1988 toyota pickup wiper arm removal????...


Remove the cover located at windshield base with flatblade screw driver or other prying device. Remove retaining bolt, then while prying under wiper arm where it is attached to wiper motor shaft, wiggle wiper arm side to side and up & down. Don't be scared.

May 18, 2010 | 1988 Toyota Pickup

1 Answer

2002 toyota hiace van front wiper reservoir refill point


I have the 1990 model and just so happened to stumble on its unusual location today as I was replacing the door hinges. On the passenger side open the door and look above the step, there should be a little plastic cap with the wiper icon on it. hope this helps!

Oct 23, 2009 | 2002 Toyota Highlander

1 Answer

Wiper blades are in upright position when they pause on a venture van


the van you have has a clutching wiper park mechanism. there is a spring at the bottom of the assembly. it breaks as the van gets older, and when this happens the wipers stay up in the air. somepeople find this distracting. so they will have there mechanic realign this clutch so it only parks in the air during pulse wiper. the repair for this is to simply have your mechanic or even you if you are mechanically inclind to replace it yourself. remember though aligning it is very important for this system to work right.
this part is bolted to the motor and it is on the left side of the engine compartment, under a plastic cover that you will need to remove. you can get a new clutch assembly from your dealer. unfortunatly it doesn't come with instructions.

- to align this part start by turning key off and removing it from ignition
-no to remove old part. you will need 27T torx screw driver to remove the clutch and 5/16 socket to loosen the wiper arm latch.
-once they are removed from assembly use a hammer to lightly tap up on the part to remove it.
-before putting the new part on take the key and turn ignition switch back on. turn wipers to pulse. when motor stops moving for the pulse timer then turn off the key and remove it again. leaving the wiper switch alone, so the motor will stay in that palse position.
-now place the new clutch onto motor shaft so that the spring loaded clip at the bottom almost clips into the lip of its holder. the lip is a raised piece of steel to the left of the shaft.
-now the knob part of the assembly should be facing the drivers side. now bolt it into place.
-hookup the wiper arms and then turn key on
-turn wipers to low then off.

they should now park down at the bottom of the window.

Aug 30, 2009 | 2004 Chevrolet Venture Passanger

1 Answer

Need to change a rear window wiper motor


Remove the outer wiper arm. Remove inner tailgate coverings. Disconnect wiper electrical connector and retaining bolts to remove. Installation is reverse of removal

Apr 25, 2009 | 2003 Ford Windstar

2 Answers

Wiper motor replacement


Im looking for a way to get at the rear wiper motor.How do you get the panaling off

Jun 20, 2008 | 1997 Dodge Caravan

Not finding what you are looking for?
1988 Toyota Lite-Ace Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...