Question about 1989 Honda Accord 4 Door

1 Answer

How to instsll power sreering oump

Trying to install power steering pump

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 27 Answers

I highly recommend YOUTUBE! My daughter actually changed her motor watching youtube videos! Good luck How to Remove Replace Power Steering Honda Accord

Posted on Nov 13, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Ford Thunderbird, power steering semi hard, makes whining noise in power steering system when wheel is turned


fords are notorious for this problem . the noise your hearing is air trapped inside the pump . try to bleed the system by slowly turning the sreering wheel from stop to stop . if you still have a problem it might just need a new pump . very inexpensive easy fix

Aug 27, 2013 | 2002 Ford Thunderbird

1 Answer

My 2005 buick rendezous makes a whinning noise when turning the steering wheel


CHECK THE POWER STEERING FLUID.iF THE FLUID IS NOT LOW CHECK THE BELT. IF IT IS TIGHT THEN THE OWER SREERING PUMP IS FAILING

Feb 21, 2012 | 2005 Buick Rendezvous

1 Answer

Trying to locate the fuse that is for the power steering for a 2007 Chevy Equinox....battery needed to be jumped and lost the power steering


Before continuing with your power sreering problem, please review these articles:
Where's The Fuse?
What Else Could Be Wrong?

The fuse for the Electronic Power Steering (EPS) is marked "EPS" and is located in the underhood fuse block on the left side of the engine compartment. It is an 80 Amp fuse. If this fuse was blown as a result of jump-starting the engine, something must have gone terribly wrong! Like - maybe the cables got hooked up backwards or something? You probably have some serious computer system damage...I would get prepared to spend some BIG BUCKS!

Apr 12, 2011 | Chevrolet Equinox Cars & Trucks

2 Answers

I need to find out how to remove the power steering pump on a 2006 pontiac grand prix 3.8L


Power Steering Pump Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Disconnect the power steering pressure hose from the power steering pump.
5. Disconnect the power steering return hose from the power steering pump.
6. Disconnect the harness connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
8. Remove the power steering pump from the engine.
9. Remove the power steering pump pulley from the power steering pump.
10. Remove the power steering pump reservoir from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Connect the power steering pressure hose to the power steering pump.
6. Connect the power steering return hose to the power steering pump.
7. Install the harness connector (1) to the power steering pump (4).
8. Install the accessory drive belt.
9. Fill the power steering system with fluid.
10. Bleed the power steering system.
11. Operate the power steering system and inspect for power steering system leaks.

d2ff628.jpg
949e18c.jpg
a9ee201.jpg
*This originally came from abauto

Mar 24, 2011 | 2006 Pontiac Grand Prix

1 Answer

I have 1996 pontiac bonneville i need to known where the power steering fluid goes


on the pump for the sreering should be a cap to take off for filling

Mar 12, 2011 | Pontiac Bonneville Cars & Trucks

1 Answer

The power steering fluid pump is leaking from my 1997 toyota camry (six cylinders). Should I replace the pump or keep refilling the fluid?


HI,
check and see if it is the hose or connection that is leaking. Sometimes a clamp will loosen or a hose crack. If the fluid is leaking from the sreering box /rack, then the best thing to do is replace it with a rebuilt / new unit.

If you just keep adding fluid to compensate for the loss, you might have a very unpleasant surprise one day, and find yourself with little if any, steering.

Really, it's a safety issue, and you should have the problem rectified A.S.A.P.


Good luck.

Jan 31, 2011 | 1997 Toyota Camry

1 Answer

HOW TO REPLACE A POWER STEERING HOSE


FIRST OF ALL YOU HAVE TO REMOVE POWER STEERING FLUID.USING A SUCTION GUN OR LARGE SYRINGE.REMOVE MUCH FLUID AS POSSIBLE.WHEN DONE REMOVING POWER STEERING FLUID.YOU NEED A INLINE WRENCH AND OPEN BOX END WRENCH TO REMOVE THE POWER STEERING HOSE.YOU HAVE TO REMOVE POWER STEERING LINE FROM THE RACK.UNDER THE CAR SAFELY RAISE AND SUPPORT VECHICLE. THEN REMOVE THE TIRE OR WHEEL.THEN REMOVE THE INNER FENDER SPLASH SHIELD.ITS GOING TO BE A TIGHT FIT AND HARD PLACE TO GET YOUR HAND TO REMOVE THE POWER STEERING LINE FROM BOTTOM.WHEN DONE.MAKE SURE NEW POWER STEERING HOSE OR LINE HAS NEW O RINGS.WHEN INSTALLING THE THE NEW STEERING HOSE.WHEN ALL IS DONE BLEED POWER STEERING SYSTEM. FILL UP POWER STEERING PUMP TO CORRECT FLUID LEVEL.THEN LET IT SET FOR 2 MINUTES UNDISTURBED.THEN START THE ENGINE RUN IT FOR 2 TO 3 SECONDS.ONLY CHECK THE RESERVOIR AND ADD MORE FLUID AS NECESSARY.REPEAT THE OPERATION UNTIL THE FLUID LEVEL REMAIN CONSTANT.NOW RAISE FRONT OF THE CAR UNTIL THE WHEELS CLEAR THE GROUND START THE ENGINE AND INCREASE THE SPEED TO ABOUT 1500 RPM.NOW TURN THE STEERING WHEEL GENTLY FROM STOP TO STOP CHECK THE FLUID LEVEL.LOWER THE VECHICLE TO THE GROUND WITH ENGINE STILL RUNNING MOVE THE CAR FORWARD SUFFICIENTY TO OBTAIN FULL RIGHT LOCK FOLLOWED BY FULL LEFT LOCK BUT DONT HOLD THE SREERING WHEEL FIRMLY AGAINST THE STOPS.RECHECK THE FLUID LEVEL IF THE FLUID IN THE RESERVOIR IS EXTREMELY FOAMY ALLOW THE CAR TO STAND FOR A FEW MINUTES.WITH ENGINE OFF.WHEN JOB IS FINISH. WARNING DONT DRIVE CAR ON ROAD IF YOUR FLUID STILL FOAMY OR POWER STEERING PUMP MAKE NOISES.REBLEED THE SYSTEM AND CHECK FLUID LEVEL AND CHECK FOR LEAKS.DONT DRIVE CAR UNTIL YOU START FEELING NORMAL STEERING.IF YOU HAVE TROUBLE DONT DRIVE.HAVE IT TOWED TO THE NEAREST GARAGE.

Oct 05, 2009 | 1999 Oldsmobile Alero

1 Answer

I need to remove the power steering rack on my toyota land cruiser colorado 3.0litre diesel


1. Lift the front of the vehicle, support on axle stands and remove wheels..
2. Loosen tie rod ends from hubs andremove them from rack ends.
3. Remove presure pipe from steering pump, and return pipe on reservoir, drain oil in suitable container.
4. Remove bolt on steering shaft universal and remove from rack by slightly tapping with suitable drift .
5. Remove 4 bolts securing rack to chassis.
6. Remove brackets securing pipes on rack *** well as chassis, slide rack to opisite side of sreering
shaft, remove pipes from rack.
7. Remove rack

Jun 26, 2009 | 1998 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...