Question about 1991 Oldsmobile Toronado

1 Answer

91 olds toronado won't start battery has full charge.key may need programmed?

Reprogram key to ignition?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Only reprogram if you know it needs programming otherwise you are wasting your money. Take the key to a main dealer and ask them if the programming is still working as you are having trouble starting your car.

They should be able to tell you if it needs programming or not.

Posted on Apr 12, 2014

Testimonial: "could it be the starter?"

  • andrewdai Apr 13, 2014

    dont think it ur key, it may be ur starter is bad. also check if ur spark plugs are good, fuel is good or not.

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: my keys was stolen in robbery so i replaced the

You must get a new ignition at dealer, then your dealer will have to program the key it will never start without that chip..

Posted on Jun 06, 2009

cooper0365
  • 347 Answers

SOURCE: Mid 70's GM Ignition Lock won't turn to run or start with key

try sparying wd forty in it and work it back in foward and put powder giffite in it should come loose

Posted on Oct 24, 2009

honeymokey
  • 3113 Answers

SOURCE: LEFT TURN SIGNAL WON'T CANCEL OUT ON 91

Return spring is broken on turn signal switch.

Posted on Oct 15, 2011

redds55
  • 2620 Answers

SOURCE: I have a 91 olds supreme 3.1 v6 it shut off and

Check the coils that have been replace for bent or broken prongs that plug into the ignition control module and if nothing looks damaged then i would think the ignition control module is faulty.Replace ignition control module.

Posted on Jan 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

11 Answers

Changed ignition switch now security light stays on and truck starts and kills


You need to relearn the passlock system (security). There are 2 ways. One is with a scanner, which most diy'er wont own an expensive one to do it this way, here is the manual way. Start the truck and let it run until it dies. The security light should then be flashing. Leave the key in the run position until the security light stops flashing (about 10-15mins). After the light stops flashing turn the key off. Try to start the truck again. It should do the same thing (run for a few seconds and then die with the security light flashing). Again wait for 10-15 mins for the light to stop flashing and then turn the key off and repeat the process one last time. That's a total of 3 times. Once you finish the process the 3rd time. Let the truck sit for a minute with the key off. It should now be programmed and start and run normally.

Jun 02, 2014 | 1999 Chevrolet Silverado 1500

1 Answer

Ignition lock cylinders


Have you had the system reprogrammed? The security system is locking you out.

Mar 12, 2014 | 2002 Dodge Caravan

3 Answers

I accidentaly broke my key for my 2000 Ford Explorer,and I changed out the ignition and collumn the car turns over but it wont start.But my anti theft is activated .How do I disable or turn off the an


The old key may have an induction chip in to deactivate the anti theft system. Does it have a red insert (chip) in the key handle? Get the old key and place it as close to the ignition barrel as possible. Seen this done on a number of occasions to save paying for a key reprogram.

Jan 01, 2014 | 2000 Ford Explorer

1 Answer

2005 ford 500, won't start a lock light is


need to reprogram ignition key security system when battery disconnected. turn ignition key to the on position for 3 to 10 seconds until the lock light goes out then start vechicle.if lock light dont turn off turn ignition switch to on position 30 seconds until lock light turn off.

Jun 12, 2013 | Cars & Trucks

1 Answer

Hi, I have a suzuki swift 2000 model, the key has snapped in the ignition, i have a used replacement ignition barrel and key. When fitted the engine turns over but won't start. I'm guessing th


This car has a chip key, you can't just put any old key in it it must be programmed to not turn on the security system and disable starting, which is what you have now, the system has locked you out.

Feb 10, 2012 | Suzuki Swift Cars & Trucks

1 Answer

I have an '87 Olds Toronado and my problem is the battery goes dead over night while parked and shut off. I have had the GENERATOR light come on and also ELECTRICAL light come on. Any suggestions?


Sounds like the battery is not holding a full charge...or not being fully charged by the alternator...(may be a corroded connection) Both of these are free tests at your local parts store...if both test fine...(unlikely) the starter has to be shorting out to drain the battery overnight...Hope this helps.

Feb 01, 2011 | 1987 Oldsmobile Toronado

1 Answer

No crank security on


security on means your passlock sensor is probably at fault.. you will need the who key barrel and sensor to be changed and reprogrammed. can be done yourself but not easy.

first remove old system and replace new assembly. might be easier to replace the whole column switch and all. once you have changed the parts you now have to reprogram cylinder into computer.
now you might want to hookup a battery charger for this next step
now turning key to crank then leave key on to ignition security light will flash
after 10 minutes the light will stop flashing and then stay on.
now turn key off wait 5 secs.
then turn key to start again then again leave key in ignition.for 10 minutes

you will repeat these steps three times. the fourth time the engine shold turn over and start.

cylinder sensor is now programmed

Aug 25, 2009 | Chevrolet C1500 Cars & Trucks

1 Answer

Wont start


i have a 91, this happens to me but it says STARTER DISABLED on the display. If the 90 is the same, it is an anti theft feature. On the ignition key there is a black square thing after the teeth of the key. The system needs to recognize the black square to start the car, so if it is warn down you will have this problem. Get a spare made with that special key only some key copier places have it. But on mine if you wait 3 minutes after the message shows up, you can then start it successfully.

Good luck!

Jun 26, 2008 | 1990 Oldsmobile Toronado

3 Answers

Stumped can get this car to start


if its auto check inhibitor switch also check ignition switch and all fuses

May 26, 2008 | 1995 Pontiac Bonneville

Not finding what you are looking for?
1991 Oldsmobile Toronado Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...