Question about Hyundai Excel
Changed timing belt didnt move any thing will it still be in time hyundai excel 1998
You need to have it reset if it's not running correctly with a strobe light. A garage should be able to help you with this.
Posted on Apr 13, 2014
Check this by turning the crank shaft and seeing if all the timing marks line up
Posted on Apr 12, 2014
You need to make sure it is on top dead center on the crank gear, then align the marks on the cam gear
Posted on Apr 12, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I would go to auto zone and get a diagram and the timing belt and do it yourself and the water pump (no it does not have to be changed everytime the timing belt is changed but if the car has over 60,000miles then it is best to change them both) it is not that hard especially if the car is not out of time just make sure you disconnect the negative side of the battery
Posted on Jan 21, 2009
Sign up for an account on hmaservice.com. Once you do so, log in and click on "Shop". You can then enter your year/make/model and you will find the info under, engine mech. system>timing system>timing belt>repair procedures. Very detailed, and best of all, FREE.
Posted on May 27, 2009
hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers
Posted on May 28, 2009
these plugs should be NGK BKR5ES-11 or PK16PR11 ND and plug gap at .044". hope this helps. cheers.
Posted on Dec 03, 2009
Testimonial: "Thank you mate.Thanks a lot"
Timing mark on cam is 20 past [as a clock face]
Pin mark on cam lines up with head casting mark
Crank mark 5 past,line up pin marks
Posted on Mar 20, 2010
Tips for a great answer:
Jun 07, 2014 | 1994 Hyundai Excel
Mar 21, 2011 | Hyundai Excel Cars & Trucks
Sep 09, 2010 | Hyundai Excel Cars & Trucks
Mar 01, 2010 | 2001 Hyundai Sonata
Nov 15, 2009 | Hyundai Motor 1993 Excel
Jun 30, 2009 | 1998 Hyundai Tiburon
Jun 24, 2009 | Hyundai Motor 2003 XG350
Dec 28, 2008 | 1990 Hyundai Excel
Aug 23, 2008 | Hyundai Motor 1993 Excel
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: