Question about 2007 Chevrolet Cobalt Coupe

Open Question

Code p0128 coolant" problems 2 Answers What can keep causing Check engine code P0128

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 79 Answers

SOURCE: 2002 Chevy Malibu - Oil in Coolant Tank

Sounds like your head gasket has a leak. I would also check your dip stick. If there is coolant mixed with the oil also. Then it is your head gasket.

Posted on Feb 03, 2009

Ad
  • 43 Answers

SOURCE: P0128 code

Unless the car is overheating you probably just have a bad temperature sensor probably located on the intake manifold....

Posted on Apr 03, 2009

Testimonial: "i replaced the coolant temp. sensor and every thing is o.k. Thank's for the help. Your advise was right on."

motor1258
  • 6674 Answers

SOURCE: P0128 Code for a 2004 trailblazer with service engine soon light

Replacing it is the only fix. Sounds like it may be sticking open slightly.

Posted on May 27, 2009

  • 1986 Answers

SOURCE: 2007 Chevy Cobalt with p0128 and "---" temp reading

The P0218 Code is primarily intended to indicate a faulty thermostat.
Have the thermostat replaced

Other possible causes that could trigger this code would be:
Low engine coolant level
faulty cooling fan
faulty coolant temperature sensor
faulty intake air temperature sensor


Posted on Sep 08, 2009

  • 599 Answers

SOURCE: is it hard to change a thermostat in 2005

no not hard to do, just make sure you get all the air out of the system,if you need more help get back to me Thanks Ray

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Po128 is the code. What's the problem


Well, I can't give you any specific information regarding your vehicle because you forgot to mention what kind of vehicle you have. (This is kinda important if you really want some help figuring out what is wrong with your car)

The "Generic OBD" of code P0128 is "Coolant Temperature Below Thermostat Regulating Temperature"

The most likely cause is a stuck-open thermostat, however, I have also seen defective Engine Coolant Temperature (ECT) sensors also cause this code.

Jun 13, 2011 | Chevrolet TrailBlazer Cars & Trucks

2 Answers

Eror code: PO128 Code


This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125
In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.
Symptoms You will likely not notice any drivability problems other than the MIL illumination.
Causes A code P0128 may mean that one or more of the following has happened:
  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor
Possible Solutions Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
  • Verify coolant strength & level
  • Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
  • Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
  • Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
  • If the above items check out good, replace the thermostat
  • If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code
Other ECT sensor and circuit related DTCs: P0115, P0116, P0117, P0118, P0119, P0125

Feb 08, 2011 | Buick Rendezvous Cars & Trucks

1 Answer

I have a 2004 Chevy Impala. As I was driving home yesterday I had the heater on full blast - temp outside appx. 60. The check engine light came on and I had a P0128 code. Could this be due to keeping...


This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.


A code P0128 may mean that one or more of the following has happened:

  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor

Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:

  • Verify coolant strength & level
  • Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
  • Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
  • Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
  • If the above items check out good, replace the thermostat


REFERENCE: http://www.obd-codes.com/p0128


I hope this helps a bit!

Jan 11, 2011 | 2002 Chevrolet Venture Passanger

1 Answer

Error code po128


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms: You will likely not notice any drivability problems other than the MIL illumination.

Causes: A code P0128 may mean that one or more of the following has happened:
* Low engine coolant level
* Leaking or stuck open thermostat
* Faulty cooling fan (running too much)
* Faulty coolant temperature (ECT) sensor
* Faulty intake air temperature (IAT) sensor

Possible Solutions: Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
* Verify coolant strength & level
* Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
* Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
* Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
* If the above items check out good, replace the thermostat
* If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code


Hope helps (remember to rate this answer).

Jan 07, 2011 | 2002 Chevrolet Venture Passanger

2 Answers

P0128 coolant temp below thermostat/regulating temp


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms: You will likely not notice any drivability problems other than the MIL illumination.

Causes: A code P0128 may mean that one or more of the following has happened:
* Low engine coolant level
* Leaking or stuck open thermostat
* Faulty cooling fan (running too much)
* Faulty coolant temperature (ECT) sensor
* Faulty intake air temperature (IAT) sensor

Possible Solutions: Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
* Verify coolant strength & level
* Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
* Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
* Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
* If the above items check out good, replace the thermostat
* If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code

Hope helps (remember to rate and comment this).

Sep 27, 2010 | 2006 Dodge Caravan

1 Answer

I have a 05 chevy trailblazer, the check engine lite is on and a hand held analyzer indicated problem codes: PO410 $ PO128 any ideas? Wayne C


P0410

Definition
Secondary Air Injection System fault
Explanation
The air injection system is monitored for faults
Probable Causes
1) Circuit relay defective or fuse open
2) Check connector and wiring
3) AIR pump defective or hoses blocked


P0128
Fault Code Definition
  • Engine temperature has not increased and/or reached the correct level within a specified amount of time after engine startup
Common Problems That Trigger the P0128 Code
As for the po128 I would replace the thermostat first. That is the problem 99% of the time.

Good Luck

Jul 12, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

Dtcdescriptionp0128andrepair


DTC P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

What does that mean?
This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms:
You will likely not notice any drivability problems other than the MIL illumination.

Causes:
A code P0128 may mean that one or more of the following has happened:
* Low engine coolant level
* Leaking or stuck open thermostat
* Faulty cooling fan (running too much)
* Faulty coolant temperature (ECT) sensor
* Faulty intake air temperature (IAT) sensor

Possible Solutions:
Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
* Verify coolant strength & level
* Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
* Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
* Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
* If the above items check out good, replace the thermostat
* If Nissan vehicle, check for a TSB such as this one. The ECM may need to be reprogrammed to correct the P0128 code


Hope helps (remember rated this).

Jul 01, 2010 | 2004 GMC Envoy

3 Answers

What can keep causing Check engine code P0128


CODE P0128- THERMOSTAT MALFUNCTION. POSSIBLE CAUSES 1. ECT SENSOR IS OUT OF CALIBRATION. 2. CHECK THE OPERATION OF THE THERMOSTAT IT MAY BE STUCK OPEN.3.INSPECT FOR LOW COOLANT LEVEL OR FOR AN INCORRECT COOLANT MIXTURE.

Jan 06, 2010 | 2004 Kia Spectra

3 Answers

2006 pont grand prix when car gets warm it starts misfiring i will scan it code po300 comes up and code po 128


P0300 is a code for multiple misfire. Which could be created to the P0128
P0128 PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat.
A code P0128 may mean that one or more of the following has happened:
  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor
Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
  • Verify coolant strength & level
  • Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
  • Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
  • Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
  • If the above items check out good, replace the thermostat
Good luck and hope this helps. keep me posted, be glad to know your car is running 100% again soon.

Nov 04, 2009 | 2006 Pontiac Grand Prix

2 Answers

Check engine light on, diagnostic code 0128 and 0410 keep coming up


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

P0410 - Secondary Air Injection System Malfunction
(has to do with exhaust system)

Note: There is a technical service bulletin (TSB) regarding code P0410 for a number of GM models. The TSB calls for the replacement of the AIR pump and the installation of a new secondary injection hose.

Oct 13, 2009 | 2005 Chevrolet TrailBlazer

Not finding what you are looking for?
2007 Chevrolet Cobalt Coupe Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...