Question about Cars & Trucks

Open Question

Need to insyall an autopage rf-225a,motion sensor, and siren on a 2001 dodge ram 3/4ton

Installation

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 512 Answers

SOURCE: 2001 dodge ram 1500 v8 spark plug wire diagram

the firing order is 1 8 4 3 6 5 7 2 clockwise around the cap

Posted on Jan 03, 2009

Ad
  • 14 Answers

SOURCE: thermostat in 2001 dodge ram 1500

the thermostat is located where the upper radator hose comes off the engine there are two bolts or nuts remove hose and remove housing you will see the thermostat when you do clean old gasket material off block and reverse removal procedure

Posted on Apr 07, 2009

  • 701 Answers

SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?

Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

Posted on Jul 07, 2009

  • 20 Answers

SOURCE: autopage car alarm install wiring diagram for the

here is a link for the installation manual. hope this helps, dave.
http://www.autopageusa.com/resources/RF420%20INSTALL%20manual.pdf

Posted on Dec 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front tire makes a loud whining/horn like sound when it is in motion, what can be the problem?


Either bad brakes on that side or a bad wheel bearing.



HOPE THAT HELPS

Dec 16, 2014 | 2014 Dodge Avenger

1 Answer

How do I adjust the timing on a 2001 Dodge Ram


There is no adjustment for the timing on a 2001 dodge ram 1500 4x4 5.2 liter . and the most likely cause on th eother problem is the abs speed sensor on the rear differential it is bolted to the top of the differential housing with a 10mm bolt remove it slowly in a twisting motion and put new differential grease on the o-ring slide it in and bolt it down and remeber to clear all codes or the sensor will run off of old paremeters

Sep 23, 2014 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Engine code p1297 on 2001 dodge ram 1500 with 3.9


P1297 DODGE Description The Engine Control Module (ECM) detected no change in MAP sensor voltage.

- MAP Sensor harness is open or shorted
- MAP Sensor circuit poor electrical connection
- Faulty MAP Sensor
- Faulty ECM

Feb 27, 2013 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

I need to identify the sensors on a 2001 dodge dakota 4.7l auto trans.


Go to the auto supply store near you and get a Haynes manual for the 2001 Dodge Dakota...it's in there!

Jan 01, 2013 | 2001 Dodge Ram 2500 Truck

1 Answer

Where is the coolant temp.sensor located on 2001 dodge 1500


The alternator needs to be removed to easily access and locate coolant temperature sensor.For more details and ECT diagram on 2001 dodge ram click the link below and follow the details to replace the coolant sensor:-----

http://technoanswers.blogspot.com/2012/10/dodge-coolant-temperature-sensor.html
--------
These details will help.
Thanks.

Oct 21, 2012 | 1997 Dodge Ram 1500 Club Cab

1 Answer

How to undew clip on rear abs speed sensor 2001 dodge ram and remove same


if i remember that is a steel clip if so just bend open. and undo the bolt that holds in the sensor and take a screw driver and pry out the sensor

Sep 30, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

2001 dodge 3500 van cam position sensor location


Crank sensor is in the bell housing of the transmission. Cam sensor is in the distributor.

Jul 25, 2010 | 2001 Dodge Ram 3500 Truck

1 Answer

I have a ram 2500 and the abs pump will not stop running...what could be the problem?


It can either be wheel sensors abs sensors or the abs pump itself. You are going to have to diagnose the problem of these three things until you find out what your problem is. I do not recall on a 2001 dodge ram if the wheel sensors and the abs sensors are the same or not

Jun 25, 2010 | 2001 Dodge Ram 2500 Truck

3 Answers

2001 dodge ram 1500 5.9 camshaft position sensor location?


CAMSHAFT POSITION SENSOR 2001 Dodge Truck RAM 1500 1/2 ton 2WD 5.9L SFI 8cyl The Camshaft Position Sensor is located: Under hood, center, upper engine area, rear of intake manifold, mounted in distributor

If this is helpful.Please leave ositive Feedback. Thanks, SnugglePants

Oct 21, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...