Question about 2006 Infiniti G35

1 Answer

How to reset tire light

Low pressure tire light comes on but pressure is correct in the tires

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Infiniti Expert
  • 473 Answers

Could have a bad sensor

Posted on Mar 08, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
pingman37
  • 58 Answers

SOURCE: Tire pressure light is on

You cannot reset them,Make sure that you check the pressures in the tires. The Infiniti Tire Pressure Monitoring System is designed to trip the warning light anytime the pressure in any of the tires drops below 29 psi. At 29 psi it really won't look like the tires are low. You could have one tire at 29 or 28 causing the light to stay on all the time. Check your pressures, set at 34 or 35 to be safe, or whatever pressure the tire is recommended to be. Not all infiniti vehicles with TPMS have the display that shows the pressure in each tire. If the pressures are above 29 psi, Then there could be an issue with one or more of the sensors. If you have the tires replaced you will have to have the sensors relearned at the dealer. Tire rotations do not require the same. 

Posted on May 08, 2009

  • 190 Answers

SOURCE: Tire pressure light remains on

Unhook negative battery cable for about 30 seconds and that'll reset it

Posted on Jul 02, 2009

  • 49 Answers

SOURCE: A dash light indicates something

This is your tire pressure monitoring system. Check the spare tire also. Some cars have a full size spare tire with a sensor in the tire as well. If all tires have the correct pressure then drive the car for a few minutes and see if the light goes out. if not then the vehicle will have to checked in a repair shop for further problems in the system.

Posted on Dec 20, 2010

  • 2926 Answers

SOURCE: what is the recommended tire pressure on the 05 fx

Too much air pressure (cold tire temp) when filling, will cause center tire wear. The pressure recommendations and recommended tire sizes are located on the inside driver side door panel.

Posted on Feb 24, 2011

Testimonial: "so, should we disregard the recommendations on the tires and only go with the label on the inside of the door for the proper psi ? thank you"

  • 867 Answers

SOURCE: Warning tire pressure light keeps coming on in my

Your car has pressure sensors inside the wheels, If you have checked the pressures and they are ok then the fault is with the pressure sensor in one of the wheels, Unfortunately you will need to see the dealer for help if the pressures are ok.

Posted on Mar 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low tire pressure light keeps coming on, even when tires are at correct pressure


First, check the tire pressure of the spare. If all tires are properly inflated, then one of the sensors are bad and must be replaced.

Mar 16, 2015 | 2006 Jeep Liberty

3 Answers

How do you reset the low tire pressure light?


To reset the tire pressure system, do the following:

(NOTE!....Do not reset the check tire pressure system without first
correcting the cause of the problem and checking
and adjusting the pressure in all four tires. If you reset
the system when the tire pressures are incorrect,
the check tire pressure system will not work properly
and may not alert you when a tire is low or high.)

1. With the engine off, turn the ignition to ON.
2. Press the MODE button until the DIC reads LOW
TIRE PRESSURE HOLD SET TO RESET.
3. Press and hold the SET button until you hear a
chime, and TIRE PRESSURE RESET is displayed.

You will hear three chimes, then the LOW TIRE
PRESSURE message will go off and the DIC will return
to TIRE PRESSURE NORMAL. If the LOW TIRE
PRESSURE message comes back on, the check tire
pressure system has not reset. Repeat the procedure.
The system completes the calibration process during
driving. The system learns the pressure at each tire
throughout the operating speed range of your vehicle.
The system normally takes between 30 and 60 minutes of
driving to learn the tire pressures. The system normally
takes 10 to 20 minutes of driving in each speed range to
learn tire pressures. The speed ranges are 20 to 40 mph
(32 to 64 km/h), 40 to 60 mph (64 to 96 km/h), and above
60 mph (96 km/h). This time may be longer depending on
your individual driving habits. The learning process does
not need to be completed during a single trip. Once
learned, the system will remember the tire pressure until
the system is reset.

Jun 02, 2014 | 2004 Buick Rendezvous

1 Answer

Tyre pressure warning light showing when pressures are correct


Hi, the tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You can re-initialize the system by following these steps:

1. Check and make sure that your tires are inflated to the correct pressure

2. Turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (in the glove box) until the warning light turns off and then release the switch.

3. Now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. Initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

May 13, 2011 | Renault 18I Cars & Trucks

1 Answer

We got the car a few months ago. Low tire pressure light came on during the first cold snap. One tire was couple lbs low. We reset it. Few days later the light came on again. Tires were fine. We reset it....


Hello: If the tires are programmed to the correct position on the truck the the tire that is showing low may have a bad sensor. The battery in the sensor only lasts so long (maintence item) When the light?message comes on is a tire actually low?

Jan 11, 2011 | 2005 Buick Rendezvous

1 Answer

Changed right front tire now reads zero on dash light is on


Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 24, 2009 | 2008 Chevrolet Tahoe

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

3 Answers

The check tire pressure light and ABS auto traction sensor light keep coming on. Tire pressure is good


The tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You should be able to re-initialize the system by following these steps:

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 11, 2009 | 2004 Cadillac Deville

1 Answer

What does it mean when you reset the low tire sensor on a 2002 toyota Sienna and comes back on? The tire pressure has been checked and its fine.


You have to "Teach" the tire sensors to the correct pressure. The 02 Sienna does not measure the actual PSI tire pressures, it measures the RPM of the tires. with the tires set to specs, the rotation RPM is "x". If a tire goes low, the rotation RPM would bt "y", and that will light the light.

The proceedure: Set the tires to specs with a known good pressure gauge. The ones that you can put in your pocket, that looks like a pen, are alway sincorrect. Get one with a needle reading. Set the tires correctly. Now, press the reset button, hold it until the light blinks 3 times. Drop it into gear, and DRIVE IT. 8-12 miles, above 19 MPH, and UNDER 61 MPH. This will re-teach the ABS computer the correct values.

Apr 01, 2009 | 2002 Toyota Sienna

2 Answers

Low tire pressure idiot light


Your nissan also has a tire monitor on your spare tire if your spare has low pressure and the other 4 tires have correct pressure the light will stay on . after you ajust the spare also the light should go away.

Mar 24, 2009 | 2007 Nissan Pathfinder Off Road

1 Answer

Low Tire Pressure Indicator


I took my car to the dealer and they solved it for me, I am not sure what exactly they did, but I know it involved me changing some tires.

Oct 05, 2008 | 2005 Scion tC

Not finding what you are looking for?
Cars & Trucks Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...