Question about 2007 Saturn ION-2 Quad Coupe
Code PO304 on code reader at parts store--also says #4 cylinder multiple misfire--lite on--2days--then off 3--5days--do smell gas though!!
Best thing I can tell u is check for sensors if bad or not, most time is ur O2 sensor, or cat sensor under ur car. but do make sure ur spark plugs is not bad. any thing the engine break inside, better off buy a new car. it should the car near it age.
Posted on Apr 13, 2014
Misfires can be from the ignition circuit ( coil/s HT leads -plugs) and it can also be from injectors (low fuel pressure -faulty injectors - leaking injector washers --wiring to injectors).
Posted on Apr 12, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Random Cylinder Misfire
Get a Haynes manual for your vehicle and use the troubleshooting guide there. about $20 from amazon, auto parts store or haynes.com. This WILL save you time and shortcut this and any future diagnosis. Haynes IMHO are top notch and I like them better than some factory service manuals that fgo for $100 and more.
David, 99 Saturn, Cam position sensor codes seem to indicate a engine timing (not spark, but crankshaft/camshaft sync). Old timing belts or worn tensioners can cause belts to jump a tooth or two which can have a pretty dramatic effect. The belt could also be old/dryrot and have lost a tooth or two causing it to jump. If any of these are the case, or if the timing belt interval is near, replace timing belt, tensioner, idler roller if present and water pump. FYI, quality OEM ignition wires shold last at least 10 years. If they are really bad, you can open the engine compartment on a dark night and you will see sparks arcing between them and/or something metal nearby. We all replace wires when we are not sure what the problem is, and regardless of what anyone tells you, it only rarely solves anything unless the car is more than 10 years old.
Posted on Oct 30, 2008
The P0304 indicates the #4 cylinder is misfiring. The flashing light means the cylinder is not firing at all...It could be several things causeing it, coil, wires, plug, injector or vacuum leak. Do not drive your vehicle until you have this repaired, as it will lead to further more costly problems. Good luck, i hope this helps.
Posted on Jul 27, 2011
Tips for a great answer:
Feb 17, 2015 | 2003 Kia Sorento
Sep 21, 2014 | Cars & Trucks
Aug 05, 2014 | Honda Civic Cars & Trucks
Apr 12, 2014 | 2007 Saturn Ion
Jun 28, 2013 | Cars & Trucks
Jun 21, 2011 | 1996 Eagle Vision
May 26, 2011 | 1998 Toyota T100
P0335 Crankshaft position (CKP) sensor -
possible causes: circuit malfunction Wiring, CKP sensor, ECM
P0336 Crankshaft position (CKP) sensor - range/performance problem
possible causes: insecure sensor/rotor, air gap, wiring, CKP sensor
Is the car running? If yes, check for a loose connector on the crank sensor. You may need to take the connector off and see if there is any corrosion on the terminals. If yes, do your best to clean with a small screwdriver and/or electrical parts cleaner.
From what I can tell, the sensor is on the bottom of the engine near the idler arm, but it has a long pigtail such that the connector is on top of the engine by the fuel rail. See pictures below.
for the misfire,
Please see my tip at http://www.fixya.com/cars/r6715318-causes_gasoline_engine_misfires . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.
Dec 18, 2010 | 1998 Cadillac Catera
Nov 21, 2010 | 2002 Chrysler PT Cruiser
161 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: