Question about Cars & Trucks
After 871. worth of work on my car it sits.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Did they Replace the Fuel Filter???? It sounds like the Fuel Filter has a Minor Clog and needs to be Replaced. Please Rate My Response! Thanks!
Posted on Jan 31, 2009
You either have had the wrong valve seals installed, they are physically missing, or the valves are incorrect (too loose in the guides/stem too thin). The rocker arm seals will not contribute to your issue. If it did not have the oil smoke before you took the head off, the issue is with whatever the machine shop did. Valve seals have to fit TIGHT, or oil will go down the valve stem into the intake.
Take the head back to the machine shop & tell them to fix it. For free.
Posted on Sep 27, 2008
I think you have ruled out the engine with all the parts you have replace. The transmission torque convertor is in lock up mode all the time. The engine is having to hard of a time to stay at the normal idle. The over drive clutches and soleniod are most likely damaged in the transmission.
I think you should take the vehicle to a trasnmission shop , The can check the torque convetror soleniods and pressure control soleniod.
The oil light coming on bothers me. I know you have the rebuilt engine in the vehicle but I think the oil pump in the engine is starting to go out or could be weak. The lower bearings connected to the crank shaft might be starting to leak. Have the oil pressure checked .
Posted on Mar 19, 2009
This could be a number of things but i think that your problem sounds like a vacuum leak or an EGR problem. Try listening for leaks and try un-plugging the EGR solenoid valve one time.
Posted on Apr 17, 2009
Tips for a great answer:
Apr 15, 2014 | 1991 Toyota Celica
Mar 09, 2013 | 1996 Ford Thunderbird LX
Sep 21, 2012 | Toyota Cars & Trucks
Sep 05, 2011 | 1991 Toyota Celica
Sep 30, 2009 | 1994 Toyota Celica
Dec 17, 2008 | 1989 Chevrolet Cavalier
33 people viewed this question
Usually answered in minutes!