Question about 2005 Nissan Pathfinder

Open Question

Cam sensor A bank 2

I have an error code P0345 on my 05 Nissan Pathfinder 4.0. Where is the Cam shaft position sensor A - Bank 2 on the engine?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 56 Answers

SOURCE: O2 Sensor Bank 1 on a 2004 Nissan Pathfinder

ON THE EXAHST

Posted on Jan 22, 2010

Ad
  • 111 Answers

SOURCE: nissan 2006 sentra cam shaft

I would google the code and see what other owners did to correct the problem. It may be an electrical short or lose connection in harness.

Posted on Dec 13, 2010

  • 56 Answers

SOURCE: Hello, Where is the Cam

3.5litre V6 Front wheel drive, the cam position sensor is in the back of the cylinder head above the transmission. bank one is the front bank, nearest to the grill. the cam sensor is held into the head with a 10mm bolt, has one wireing connector with 3 wires in it. the sensor is sort of round with a leg off one side for the bolt the secure.
may need to remove the engine cover to see it. it is held down with allen key bolts.

Posted on Mar 26, 2011

  • 228 Answers

SOURCE: I have a 2002 Nissan

Bank two is towards the Radiator. You should check with a nissan dealership. call them up and give them your Vin # and have them run it for any recalls. There is a old recall that Nissan will replace both cam sensors for free if your car falls under the Vin range.

Posted on Jul 02, 2011

bowtie352
  • 1209 Answers

SOURCE: Where is Bank 2 on a 2000 Pathfinder

The easiest way to tell which is bank one and which is bank 2 is stand to the side of the engine and look directly across the front. one of the cylinder heads will be slightly more to the front than the other as the cylinders are offset. the leading head is where cylinder no 1 in located and that is bank one, the trailing head will be bank 2. Sensor number 2 will be the one located by the catalytic converter. Sensor no 1 is the one in the exhaust manifold close to the engine and no 2 is downstream towards the cat.

Posted on Apr 20, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Nissan Altima crank shaft censor located bank 2


there is only one crankshaft sensor so you will be looking for a CAM shaft sensor for it to be on bank 2
go google and type in --location of cam shaft sensors on nissan altima engine ---

Dec 18, 2016 | Nissan Cars & Trucks

2 Answers

Pcm?


PCM= Powertrain Control Module. It is the brains of the car, it reads the sensor in put from all sensors including the cam shaft position sensor

May 14, 2014 | 2004 Toyota 4Runner

1 Answer

P0017 WHICH IS SENSOR B-BANK 1 ?


code p0117 refers to crankshaft/camshaft position bank 1 sensor A--correlation. It also refers to control modules, cooling fan---no signal
I seeing this as a twin cam engine of either 4 or 6 cylinders . . Both sensors on the cams are sensor A so by banks I take it that it is the LH cam (from front of engine) bank 1 and RH cam is bank 2
correlation means that both cams have to read at the same time to indicate a cam has not broken

Apr 26, 2014 | 2002 Volvo S80

1 Answer

Camshaft position sensor correlation bank 1 code


timing belt is off by a tooth or two. you probably didn\'t have to replace the coolant sensor; that code sets whenever the sensor is disconnected and the ignition is turned on; and it needs to be reset by disconnecting the battery or with a code reader. anyway, the crank/ cam sensors are out of sync. if you\'ve got the twin cam engine, they are a royal pain to get the belt to lay properly on the two cams.

Apr 15, 2013 | 2007 Chrysler PT Cruiser Touring Hatchback

1 Answer

I have the code p0340 for slip n tcs is telling me is a sensor but it show2


I am not sure what "slip n tcs" means but on the 2005 nissan maxima the code P0340 is for the camshaft position sensor circit on bank 1, which is in the rear of the engine compartment. Code P0345 is for camshaft position on bank 2, which is in the front of the engine compartment. The images show the Cyl banks and a cam sensor.6_29_2012_3_38_07_am.gif6_29_2012_3_40_48_am.gif

Jun 29, 2012 | 2005 Nissan Maxima

1 Answer

I have a 2002 Nissan Maxima 3.5 With code PO345 Bank 2. I understand this to be the cam shaft sensor. Which censor is bank 2? The one towards the radiator , or the one towards the Firewall?


Bank two is towards the Radiator. You should check with a nissan dealership. call them up and give them your Vin # and have them run it for any recalls. There is a old recall that Nissan will replace both cam sensors for free if your car falls under the Vin range.

Jul 01, 2011 | Nissan Maxima Cars & Trucks

1 Answer

Hello, Where is the Cam position sensor located on a 2004 Nissan maxima bank 1 located?


3.5litre V6 Front wheel drive, the cam position sensor is in the back of the cylinder head above the transmission. bank one is the front bank, nearest to the grill. the cam sensor is held into the head with a 10mm bolt, has one wireing connector with 3 wires in it. the sensor is sort of round with a leg off one side for the bolt the secure.
may need to remove the engine cover to see it. it is held down with allen key bolts.

Mar 25, 2011 | 2004 Nissan Maxima

2 Answers

05 kia amanti with diagnostics codes p0350,p0320,p0300,p0302,p0303,p0304,p0305,p0306.skipping at times.when it does skip & misfire the rpm gauge goes crazy.this problem is not consitant


Generic OBD II Diagnostic Trouble Codes

DTC CODES P0300 to P0399

P0300....Random/Multiple Cylinder Misfire Detected

P0301....Cylinder 1 Misfire Detected

P0302....Cylinder 2 Misfire Detected

P0303....Cylinder 3 Misfire Detected

P0304....Cylinder 4 Misfire Detected

P0305....Cylinder 5 Misfire Detected

P0306....Cylinder 6 Misfire Detected

P0307....Cylinder 7 Misfire Detected

P0308....Cylinder 8 Misfire Detected

P0309....Cylinder 9 Misfire Detected

P0310....Cylinder 10....Misfire Detected

P0311....Cylinder 11 Misfire Detected

P0312....Cylinder 12 Misfire Detected

P0313....Misfire Detected with Low Fuel

P0314....Single Cylinder Misfire (Cylinder not Specified)

P0320....Ignition/Distributor Engine Speed Input Circuit

P0321....Ignition/Distributor Engine Speed Input Circuit Range/Performance

P0322....Ignition/Distributor Engine Speed Input Circuit No Signal

P0323....Ignition/Distributor Engine Speed Input Circuit Intermittent

P0324....Knock Control System Error

P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor)

P0326....Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)

P0327....Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

P0328....Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0329....Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0330....Knock Sensor 2 Circuit (Bank 2)

P0331....Knock Sensor 2 Circuit Range/Performance (Bank 2)

P0332....Knock Sensor 2 Circuit Low Input (Bank 2)

P0333....Knock Sensor 2 Circuit High Input (Bank 2)

P0334....Knock Sensor 2 Circuit Input Intermittent (Bank 2)

P0335....Crankshaft Position Sensor A Circuit

P0336....Crankshaft Position Sensor A Circuit Range/Performance

P0337....Crankshaft Position Sensor A Circuit Low Input

P0338....Crankshaft Position Sensor A Circuit High Input

P0339....Crankshaft Position Sensor A Circuit Intermittent

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

P0341 Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor)

P0342....Camshaft Position Sensor 'A' Circuit Low Input (Bank 1 or Single Sensor)

P0343....Camshaft Position Sensor 'A' Circuit High Input (Bank 1 or Single Sensor)

P0344....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or Single Sensor)

P0345....Camshaft Position Sensor 'A' Circuit (Bank 2)

P0346....Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2)

P0347....Camshaft Position Sensor 'A' Circuit Low Input (Bank 2)

P0348....Camshaft Position Sensor 'A' Circuit High Input (Bank 2)

P0349....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 2)

P0350....Ignition Coil Primary/Secondary Circuit

Nov 17, 2010 | Kia Amanti Cars & Trucks

2 Answers

Ml350 replaced a/b cam position sensor reset computer & and erra codes p0016/p0016 check engine ligth is reset car drives with light off when engine is turn off and started the light goes out if you...


P0010....'A' Camshaft Position Actuator Circuit (Bank 1)

P0011....'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

P0012....'A' Camshaft Position - Timing Over-Retarded (Bank 1)

P0013....'B' Camshaft Position - Actuator Circuit (Bank 1)

P0014....'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

P0015....'B' Camshaft Position -Timing Over-Retarded (Bank 1)

P0020....'A' Camshaft Position Actuator Circuit (Bank 2)

P0021....'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

P0022....'A' Camshaft Position - Timing Over-Retarded (Bank 2)

P0023....'B' Camshaft Position - Actuator Circuit (Bank 2)

P0024....'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

P0025....'B' Camshaft Position - Timing Over-Retarded (Bank 2)

I think your sensors are pattern parts and the readings /resistances are not the same as the original parts ,try some bosch units is my first suggestion ,

Nov 02, 2010 | Mercedes-Benz ML350 Cars & Trucks

1 Answer

CODES PO0011 AND PO0021


pooo11 is camshaft position actuator A- bank 1 timing over advanced. pooo21 is the same as above but it is bank 2. this means that the cam shaft sensor is bad. and needs to be changed.

Jan 21, 2010 | 2004 Nissan Quest

Not finding what you are looking for?
2005 Nissan Pathfinder Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...