Question about 2005 Nissan Murano

1 Answer

Windshield wiper hose leak

Crack in hose. Is that something I can fix myself?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Yes..
Remove the cracked hose and take it to parts store and buy a new hose get it about 1 inch longer than old one. Replace 1 end and put hose back in clips and measure how much you need to connect on the end and cut excess off put hose on fitting. This should have water flow agaig and no cracked hose.
B. J.

Posted on Apr 12, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

lebones337
  • 152 Answers

SOURCE: Windsheild Wiper Fluid will not squirt on windshield

most likley just some dirt. disconnect the rubber hoses going from the bottem of the resivoir to the hood and either blow thru them or use compressed air. if not the hose, check the hard plastic junctions that connect the hoses by running a neddle through them. and if needed check the thing that squirts the fluid with the needle or air. hope this works for ya

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My windshield wiper fluid will not go thru to windshield,how can i fix the problem


Your line runs from the reservoir in the fender well, up through the hose around the strut plate on top, through the bezel to the wipers. If you have no leaks, Replace the washer motor. If you fill it and it leaks, fix the leaks. To access the reservoir. Remove the tire and inner fender well on the passenger side.

Oct 05, 2014 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Windshield wiper fluid runs straight out of the reservoir. How do I fix this issue by myself?


Find out where its leaking from. A broken hose or a cracked tank. Find the leak and fix the leak. Have someone spray the washers as you look for the leak. Should be easy to spot and then repair....If it a cracked and leaking tank ....replace the tank???

Jul 16, 2011 | 1993 Honda Accord

1 Answer

Can I take out and install the windscreen myself at home..Is there a step by step how to do it process?


its a good idea to just call a glazier, usually the installation is included in the cost and they guarantee the window for up to 2 years from leaks and some types of crack damage.

If you still are decided on going hte self installation route you will need the following tools;

Glazier's knife
Flat head screw driver
Philips head screwdriver.
RTV compound or some kind of window adhesive
1/4in. socket set with driver
the process.
1. remove the windshield wiper arms.
2. remove window trims around the windshield
3. using the glazier's knife cut the old window adhesive around the windshield.
4. clean the adhesive off the windshield perch (that is the area around the windshield on the car)
5. carefully apply new adhesive to the windshield perch.
6. set the new windshield in place and press firmly around the borders of the new windshield you can tell when the windshield is set by the 'squished down' appearance of the adhesive.
7. replace the window trim and wiper arms. allow the adhesive to set for a few hours before allowing the windshield to take on water.
8. not necessary but i like to do this confirm the windshield does not leak by allowing a hose to run freely over the windshield.

***BE WARNED THE EDGES OF TEH WINDOWS ARE SHARP AND CAN CUT YOU VERY SEVERELY, ALSO THE GLAZIER'S KNOW IS SHARP AS WELL***

Apr 18, 2011 | Hyundai Excel Cars & Trucks

2 Answers

My windshield wipers don't work


To troubleshoot car windshield wiper problems, you need to thoroughly investigate problems with any of its operating parts. Here are some of the things that you need to check to determine why are your car windshield wipers not working.

Check Wiper Motor
The wiper motor is the driving force of the windshield wiper. Feel the motor and listen to a humming sound. If there is no humming, the motor is the problem. Check if the motor is working properly and see to it that its electrical connections are made properly. If you find that the motor is dead and beyond repair, get it replaced immediately.

Check For Break in Connecting Wires
The connecting wires of the motor sometimes go loose and that may cause the windshield wipers to stop working. Also check the battery plug connection which the motor has. Connecting the loose wires properly or fixing/replacing the plug might solve your problem.

Check Wiper Switch
Another wiper assembly part that can malfunction is the wiper switch itself. Check for switch malfunction and if you find that is indeed the problem, get it replaced from a mechanic.

Check for Bent Wiper Arms
Bent wiper arms can cause the operation of the wipers to be hampered. If the wiper arms are bent beyond repair, get them replaced immediately.

Check For Blown Out Car Fuse
A blown up car fuse could be the culprit that has stopped the windshield wipers from working. Check the fuse assembly under the dashboard of the car. Replacing a blown fuse might fix the problem of windshield wipers not working.

Windshield Wiper Sprayers Not Working - Things to Check

Sometimes the windshield wiper sprayer stops working which can be very annoying. The washer mechanism is a self cleaning mechanism for the windshield. Here are some of the things that you need to check in case it is not working.

Check Windshield Washer Motor
The windshield washer mechanism might have been impaired due to the malfunctioning of the wiper washer motor. Check if its working and get it replaced if it is beyond repair.

Check Windshield Washer Fluid Level
Sometimes the washer doesn't work because the washer fluid levels are not filled to requisite levels. Filling in fluid might restore normal functioning.

Check For Broken Washer Hose
The connecting washer hose that connects the reservoir to the nozzle, might be broken or worn out stalling the overall operation. Check the hose for leaks and get it replaced.

Check Washer Nozzle For Clogging
Last thing to check is the nozzle of the washer for clogging. An obstruction in the washer nozzle might be the reason for windshield wiper sprayers not working. Using a pin, clean the clogged nozzle. This might restore the sprayer to the normal working condition.

Jan 16, 2011 | 2004 Chevrolet Tahoe

1 Answer

Winshield wipers dont work


To troubleshoot car windshield wiper problems, you need to thoroughly investigate problems with any of its operating parts. Here are some of the things that you need to check to determine why are your car windshield wipers not working.

Check Wiper Motor
The wiper motor is the driving force of the windshield wiper. Feel the motor and listen to a humming sound. If there is no humming, the motor is the problem. Check if the motor is working properly and see to it that its electrical connections are made properly. If you find that the motor is dead and beyond repair, get it replaced immediately.

Check For Break in Connecting Wires
The connecting wires of the motor sometimes go loose and that may cause the windshield wipers to stop working. Also check the battery plug connection which the motor has. Connecting the loose wires properly or fixing/replacing the plug might solve your problem.

Check Wiper Switch
Another wiper assembly part that can malfunction is the wiper switch itself. Check for switch malfunction and if you find that is indeed the problem, get it replaced from a mechanic.

Check for Bent Wiper Arms
Bent wiper arms can cause the operation of the wipers to be hampered. If the wiper arms are bent beyond repair, get them replaced immediately.

Check For Blown Out Car Fuse
A blown up car fuse could be the culprit that has stopped the windshield wipers from working. Check the fuse assembly under the dashboard of the car. Replacing a blown fuse might fix the problem of windshield wipers not working.

Windshield Wiper Sprayers Not Working - Things to Check

Sometimes the windshield wiper sprayer stops working which can be very annoying. The washer mechanism is a self cleaning mechanism for the windshield. Here are some of the things that you need to check in case it is not working.

Check Windshield Washer Motor
The windshield washer mechanism might have been impaired due to the malfunctioning of the wiper washer motor. Check if its working and get it replaced if it is beyond repair.

Check Windshield Washer Fluid Level
Sometimes the washer doesn't work because the washer fluid levels are not filled to requisite levels. Filling in fluid might restore normal functioning.

Check For Broken Washer Hose
The connecting washer hose that connects the reservoir to the nozzle, might be broken or worn out stalling the overall operation. Check the hose for leaks and get it replaced.

Check Washer Nozzle For Clogging
Last thing to check is the nozzle of the washer for clogging. An obstruction in the washer nozzle might be the reason for windshield wiper sprayers not working. Using a pin, clean the clogged nozzle. This might restore the sprayer to the normal working condition.

Jan 05, 2011 | 1999 Mercury Mystique

1 Answer

2000 Pontiac Sunfire: Windshield washer hose line leaks, and no spray from either wiper. Is this something I can do myself... or should I take it to a mechanic? Thank you!


Sounds like you have found the problem...you can trace the leaking hose to both connection points...you can take the old hose in to your auto parts store to match the diameter...should be able to re-install without any clamps...(yes the leak probably reduces the pressure, and no fluid will go through...:)

Dec 20, 2010 | Pontiac Sunfire Cars & Trucks

1 Answer

Wipers don't work on my 2006 Colorado. They drag and sometimes don't come on at all


Windshield Wipers Not Working - Things to Check
To troubleshoot car windshield wiper problems, you need to thoroughly investigate problems with any of its operating parts. Here are some of the things that you need to check to determine why are your car windshield wipers not working.
Check Wiper Motor
The wiper motor is the driving force of the windshield wiper. Feel the motor and listen to a humming sound. If there is no humming, the motor is the problem. Check if the motor is working properly and see to it that its electrical connections are made properly. If you find that the motor is dead and beyond repair, get it replaced immediately.
Check For Break in Connecting Wires
The connecting wires of the motor sometimes go loose and that may cause the windshield wipers to stop working. Also check the battery plug connection which the motor has. Connecting the loose wires properly or fixing/replacing the plug might solve your problem.
Check Wiper Switch
Another wiper assembly part that can malfunction is the wiper switch itself. Check for switch malfunction and if you find that is indeed the problem, get it replaced from a mechanic.
Check for Bent Wiper Arms
Bent wiper arms can cause the operation of the wipers to be hampered. If the wiper arms are bent beyond repair, get them replaced immediately.
Check For Blown Out Car Fuse
A blown up car fuse could be the culprit that has stopped the windshield wipers from working. Check the fuse assembly under the dashboard of the car. Replacing a blown fuse might fix the problem of windshield wipers not working.
Windshield Wiper Sprayers Not Working - Things to Check
Sometimes the windshield wiper sprayer stops working which can be very annoying. The washer mechanism is a self cleaning mechanism for the windshield. Here are some of the things that you need to check in case it is not working.
Check Windshield Washer Motor
The windshield washer mechanism might have been impaired due to the malfunctioning of the wiper washer motor. Check if its working and get it replaced if it is beyond repair.
Check Windshield Washer Fluid Level
Sometimes the washer doesn't work because the washer fluid levels are not filled to requisite levels. Filling in fluid might restore normal functioning.
Check For Broken Washer Hose
The connecting washer hose that connects the reservoir to the nozzle, might be broken or worn out stalling the overall operation. Check the hose for leaks and get it replaced.
Check Washer Nozzle For Clogging
Last thing to check is the nozzle of the washer for clogging. An obstruction in the washer nozzle might be the reason for windshield wiper sprayers not working. Using a pin, clean the clogged nozzle. This might restore the sprayer to the normal working condition.

Nov 09, 2010 | Chevrolet Colorado Cars & Trucks

1 Answer

I have a 20063 Kia Sportage that was recently serviced. Since I got it back I also moved out of state and noticed that when I tried to spray my windshield wiper fluid I could hear the motor but nothing...


You are on the problem from what I read. The fluid goes from the tank, through the motor you hear, and out through small tubing to the "nozzles" that spray your windshield. I'm sure one end fell off, but you will have to search it down. Follow the hose if you can, as you may have to move some covers or parts, but look close and you may see the problem.

Aug 28, 2010 | Kia Sportage Cars & Trucks

1 Answer

Rain water enters car above foot pedal


Water is a tricky problem sometimes. If your A/C drain is plugged water can't drain from you air plenum you were looking into, so check the drain located below the heater motor and make certain no debris has blocked it.
Next, if the windshield sealer has deteriorated it can cause a leak. ( you haven't had the windshield replaced lately?).
The brake vacuum booster has a weather proof seal between the booster and the firewall, it may have deteriorated.
Anything that goes through the front of the dash should be suspect.
A good way to check is to use a garden hose and place it in particular spots and check inside for leaks. That way, you can narrow down the area that is leaking.
Good luck, let me know.
Regards,

Mar 26, 2009 | 1990 Chevrolet Corsica

Not finding what you are looking for?
2005 Nissan Murano Logo

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...