Question about Cars & Trucks

1 Answer

Where exactly is a blower transistor located at and what does it look like

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 91 Answers

Depending on make model year of your vehicle ,,, many are located under the dash close to the blower ... many are where the wiring harness plugs into it ..... vented block like on many.... and no there is no way to go around them. for your system to work properly....

Posted on Apr 12, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where's the relay for the blower located in a 2001 suzuki xl-7 grand vitara


the car has 26 relays!@
and 1 to or 3 fans
are you saying the heater/ A.C blower is dead./ the HVAC?
or engine fan (its mech for rad)
or condenser fan, no symptoms posted, just relay hunts.


my guess is you dont know how the blower in the heater works.
so will cover that.
The HVAC.
First test is blower in high, failing is bad fuse.?
if lower speeds fail, (a top clue) then the blower resistor is bad.
but only on the manual hvac option!

lets backup,I have full parts list on your car, here, USA. spec
the car came new with 2 class type of HVAC
manual AC with blower resistor
or
full auto system that as a new brain box, and a transistor box
that controls blower, at all times, its just a transistor. (no brains)
some cars with the full auto HVAC feature
have a self test mode.
and self calibration feature (learn) all this is in the BIG BOOK.
apples and oranges, different to the extreme.
so instead of me guessing car you bought. ill tell you to RTM

just 4 bucks, and only covers that exact year, and car only.
not a clone book as the folks post here , RAG books.
the real deal here from suzuki actual....

the BIG BOOK. see chapter HVAC and read.
https://suzukipitstopplus.com/Products/1174-2001-grand-vitara-xl-7-service-manual.aspx

May 28, 2016 | 2001 Suzuki Grand Vitara

2 Answers

How to find the blower motor resister in a Rover 75 Cdti


its on the side of the blower casing on all cars with it.
its AIR cooled by the blower, in not it would burn up fast.
we dont have FSM on rovers here.
but that is the truth.
some cars dont have this. it uses a CLIMATE controler that modulates
the Blower using a PWM transistor.
so.... RTM. cars vary greatly here,

Jun 23, 2014 | 2005 Rover 75 1.8

1 Answer

The heater fan just stopped...


Check fuse #14(10amp) located in fuse box under driver steering wheel behind the lower dash cover.
Check fuse#12(40amp) located in fuse box under hood.
Replace fuse(s) if any are blow.

If fuse are good.Check blower and transisto next.
Do steps 1-3 with turn key on
1. Unplug connector and check for 12v at the blue/white wire at the blower motor(2-NAT)
-if there's no voltage you might have a bad relay or open in the wire
-if there's about 12v, go to step 2
2.Plug connector for blower motor and unplug connector for blower transistor(4-NAT). Take a jumper wire and jump the blue/black wire to body ground.
-if blower does not run, replace blower motor
-if blower motor runs, go to step 3
3.check the black wire at(4-NAT) for good ground.
-if you have good ground, then replace blower motor transistor.
good luck

k42282_34.jpg

Jan 18, 2011 | 2004 Honda Element

3 Answers

I have a 2002 Elantra. Yestreday the lower fan speeds on the air conditioner fan stopped working (positions 1,2,3). The High speed (position 4) works. Any ideas how to correct?


The blower motor resistors or fan switch itself are defective.
High speed has no resistors B+ goes straight to blower motor.

Jun 03, 2010 | 2000 Hyundai Elantra

2 Answers

I have a 2004 santa fe, the A/C blower only works on high. There is power from the control head to under the dash, but where it goes into the fan there is no power except for when it is on high


How about when the heat is on? You might have 2 reostats, one for heater one for A/C.The reostat controls blower speed Most cars only have one ,but who knows seen stranger thjngs,I have had bad blower motors only work on high.My guess would be a reostat.

Mar 15, 2010 | 2004 Hyundai Santa Fe

2 Answers

I have an 04 CRV and I need to know how to check the blower motor transitor.


That is resistor and not transistor.
They are located in the blower itself, where the air keeps them cool. Just follow the wires. If there were no resistors in the motor, it would only need a single power and a ground. When it has more than one power wire, it is because some of them go through resistors of different size, to give you different speeds.

Feb 28, 2010 | 2004 Honda CR-V

1 Answer

Replace the blower motor.


Under the glove box:

Disconnect the blower motor power transistor electric connector (the transistor is far over to the left, with a curly wire coming down to it.)

Remove the blower motor power transistor mounting screws the remove the transistor.

Disconnect the electrical connector from the blower motor (slightly to the right of the motor).

Remove the blower motor mounting screws and then remove the blower motor assembly.
(there are, I believe, 3 screws; 1 just below the connector; 1 above the connector, higher up, and slightly to the left; and 1 over to the left of the blower motor)

Remove the circlip from the blower motor shaft to release the fan from the motor.

Installation is reverse.

Hope this helps you deal with it.

Dec 16, 2009 | 2003 Honda Accord

3 Answers

AC & Heater Fan on fast spped only


Most of the time this is a bad "blower motor resistor". It is easy to replace. You will find your behind the glove box in the ac/heater (evaporator) housing. Below is a pic of the resistor as it is seen from behind the glove box. 1. resistor assembly. 2. harness 3. fasteners (2). 4. lower edge of glove box. (open).

f527558.gif

Jun 11, 2009 | 2002 Chrysler Town & Country

1 Answer

Where would I find the blower/fan relay on a 2005 Hyundai xg350L?


It would be under your glove box. if your blower motor only blows on hight you need a transistor it is in the same location under the glove box.

Mar 26, 2009 | Hyundai Motor 2005 XG350

3 Answers

Air condition fan not running


your fan transistor failed. It locates at the left corner bottom of your glove box attached by 2 small screws. cost is arround 80.00 bucks. good luck.

Jul 29, 2008 | 2003 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...