- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the anti theft system is active m try this process. Turn the key on. Do not attempt to start. Wait 10 minutes. Turn key off. Turn key on. Wit for theft light to go off. Now attempt to start.
? 10:56 https://www.youtube.com/watch?v=-XjXTVJhFLM
Nov 21, 2014 - Uploaded by ChrisFix
No heat in your car? Car not blowing hot air? This video will show you how to fix your car's heater whether ...
Dash Lights May Stay on Due to Malfunction in Ignition Switchrepairpal.com > Problems > Volvo > 850the dash lights stay on after I turn the car off, Volvo repair can't find probl ... We recently replaced the ignition switch (1996 Volvo 850) and the car starts ...Dashboard lights going berserk...even when car is off - Car ...community.cartalk.com/.../dashboard-lights-going-berserk-even-when-c...Feb 11, 2013 - Dashboard lights going berserk...even when car is off. di k .... electrical systems the power to the cluster is turned OFF with the ignition switch. ... However, the abs light is one of the lights that stays faintly lit with car on or off.Radio and dashlights remains ON when car is OFF - 2014 ...jeepcherokeeclub.com/.../16673-radio-dashlights-remains-when-car-off....Jan 15, 2014 - 10 posts - 5 authorsRadio and dashlights shuts off properly when the car is OFF. .... door handle evenwithout key with me. just stay on for a m inute. notice it when i ...Dash lights won't turn off. - TDIClub Forumsforums.tdiclub.com > VW TDI Discussion Areas > TDI 101Jun 1, 2004 - I started the car, then noticed the dash lights were on before I turned on... I fiddled with the switch--even unplugging the standard NA light switch the dash lights .... If they stay the same, is it the normal brightness or dimmer?
Sounds like you might have wire problem.
Try turning the key to the point before ignition. This is actually a dashboard test that have all lights on the dashboard turn on. Try to see if the lights are completely bright or a bit dull in the light.
You battery might be uncharging itself, instead of charging. I have tried that. even with an only 1-2 day old battery.
Check your Fuel Lines and your Fuel Pump. (I just fixed a problem with my 2001 Isuzu Rodeo Fuel Return Line).
Also remember that in Rodeos, as soon as you turn your car key to turn the ignition on (just to make the dashboard lights go on) a certain amount of gasoline gets pumped to your engine in preparation of you turning the key all the way to crank the ignition and start the car. In other words, even before you turn the key all the way to crank the ignition, the Fuel Pump will pump some gasoline through the Fuel Lines to your engine (it will pump the gasoline for about 4 seconds then stop). So when you go to start your Rodeo, remember to turn the key with one continuos motion so that you start the ignition cranking while the gasoline is being actively pumped.
In addition, you should never turn the ignition lights on without turning the key all the way to start the engine. Doing so could cause that bit of gasoline that was pumped to start the engine to just sit there and create problems.
If the lights only stay on when key is in ignition, your central brake lights (or one of the lights) are out. The other lights stay on as a warning that the centrals(or other brake light/s) are needing replaced.
This sounds like an issue with your ignition switch. Basically what is happening here is that you are shutting off your vehicle, but the ignition switch is not working correctly and is allowing certain accessories to stay on.
1. Put the newly cut Master key into the keyway and turn it to the ON (RUN) position. A "security" indicator light on the dashboard will stay on for 10 minutes. 2. Within 1 minute after the indicator light goes off, turn the ignition to "OFF", then return to the ON (RUN) position. The indicator light again will stay on for 10 minutes (Do not remove the key.) 3. Again, within 1 minute after the indicator light goes off, turn the ignition to "OFF", then return to the ON (RUN) position. The indicator light again will stay on for 10 minutes. (Do not remove the key.) 4. When the light goes off the third time, the new key is programmed into the computer and will start the car. Remove the key and then re-insert it into the ignition lock and start the car. All previously stored codes will be erased. To stop the process at any time, simply remove the key and use an existing key to start the car.