Question about 1995 Toyota Camry
Tell the person at the counter at the auto parts store what kind of car and they will fix you up
Posted on Apr 13, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You aer not clear about your problem, when replacing plugs and wires all the boots need to stay in place, the larger boot goes around the spark plug, making sure the metal is secure around the tip of the plug, the oppisite end fits the distributer cap, making sure the metal at the end of the wire is securely in the hole. You said you have 3 boots, you should boots for each end of each plug wire and a plug wire for each spark plug
Posted on Jan 18, 2009
The upper intake has to be taken off to get to them. Yes it is a pain in the but, not too hard to do, just bothersome to do this to be able to change plugs. Make sure to be careful when loosening the intake as the head is aluminum and you can damage it if you take a gung-ho approach. You will need to replace the gasket but it is only around 12 -15 $ .
Posted on May 08, 2009
In servicing the spark plug . If the owner will be the one to change the spark plug then. the owner should locate the spark plugs . then prepare the equipments that is going to be used to change spark plug .First disconnect the spark plug cable to the spark pug . Then use the equipment to take the spark plug off to the engine. The spark plug should be twisted counter clock wise using the equipment to remove the spark plug.Then replace the spark plug.In returning the spark plug ,using the equipment you have to twist the spark plug clock wise . Then set the distributor shaft turn it according to the proper firing order that will be set to the spark plug if it is 1,3,4,2. Then the distributor shaft mark will be on 1.If 2,3,4,1 then the distributor shaft mark will be on 2. Then connect the spark plug cable , after connecting the owner have to test start the car so that to if it back fires .If it back fires then the owner have to repeat again the setting of the firing order of the spark plug until it will not back fires.If the owner don't have time to do the job in servicing or changing spark plug then the owner have to go to a car mechanic and let them change the spark plug.
Posted on Sep 26, 2009
1992 Toyota Camry Sedan
3.0 liter DOHC V-6 (3VZ-FE)
Cylinder # Front, passenger to drivers side 2-4-6
Cylinder # Back, passenger to drivers side 1-3-5
Distributor 12 O'clock post # 6 cylinder
10 O'clock post #1 cylinder
8 O'clock post #2 cylinder
6 O'clock post #3 cylinder
4 O'clock post #4 cylinder
2 O'clock post #5 cylinder
Good luck and hope this helps.
Posted on Jan 12, 2010
Tips for a great answer:
Apr 01, 2015 | 1998 Toyota Camry
Jan 10, 2013 | 1998 Toyota Camry
May 22, 2011 | 1998 Toyota Camry
Jun 01, 2010 | 1998 Toyota Camry
Apr 14, 2010 | 1998 Toyota Camry
Oct 12, 2009 | 1998 Toyota Corolla
Jan 18, 2009 | 1998 Toyota Camry
64 people viewed this question
Usually answered in minutes!