Question about 1993 Mitsubishi Galant

1 Answer

93 Galant Sensor

I need help with a 93 Mitsubishi Galant. When we try to start the engine just makes a clicking noise and we were told its the sensor? How do we fix that?

Posted by on

  • mystikaldark Jun 18, 2009

    Would the car turn over? It's turning over but not crankind up...

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

It may even be the solenoid. there is one on the starter, and there may be one mounted on the side firewall

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Running rich


Well you can't bypass the sensor. If the sensor was faulty the check engine light would be on.
If you have replaced the plugs you may have to get a mechanic to check out the computer and other sensors.

Dec 11, 2012 | 1998 Mitsubishi Galant

1 Answer

Engine run won't run my engine is v6a12


can you move it by hand?what noise do you hear when trying to start.
is the gear from the starter full in the motor.are all wires connected.

Jul 26, 2012 | 1992 Mitsubishi Galant

1 Answer

Install crank sensor on a 1999 mitsubishi galant need a diagram of the engine.


Hello! When you request help it is important to include the engine size...The 1995 Galant has two options; A 2.4L (4 cylinder) and a 3.0L (6 cylinder)...The Crankshaft Positioning sensor (CPS) requires removal of the timing belt...Purchasing a manual is a necessity...Guru...Saailer

Nov 01, 2011 | 1999 Mitsubishi Galant

1 Answer

02 Mitsubishi Galant, changed igniton but now wont start


There is no simple answer, there are to many variables. If you have access to a scan tool, pulling the codes should help. Without them its back to old school hunt and peck method. At this point we need to narrow down the problem. You need to test for spark.
  1. Tag and disconnect the spark plug wires from the spark plugs.
  2. Remove the spark plugs and install the spark plug wires to each spark plug.
  3. Ground (do not hold spark plug) the spark plug; check if spark occurs while engine is being cranked.
Crank the engine for no more than 2 seconds at a time to prevent flooding the engine with gasoline.
If you have spark, You will want to make sure you have fuel injector pulse, along with fuel pressure. If you have spark ..simply spray some starting fluid in through the air filter and hold the gas pedal to the floor and crank it over while spraying. If it fires up, you know it is fuel related( fuel pump, regulator, or ECM if no injector pulse) . If you have no spark then look at ignition coil connection and trace through to the distributor( if equipped ). The crank shaft sensor has a tendency to fail on these as well. This should give you a few things to test and check to start you on your way to narrowing it down. If you have no spark then look at ignition coil connection for power and trace through to the distributor( if equipped ). If it is DIS( no distributor). It may be the Crank sensor or the ECU. The crank shaft sensor has a tendency to fail on these as well.
The ECU uses the signal sent from the Crank sensor to trigger the spark and fuel injectors. ( make certain you have checked all fuses)

Jul 01, 2010 | 2002 Mitsubishi Galant

1 Answer

Car wont start single click


This is not the crank sensor if the starter will not engage,and turn the engine,clean the battery terminals real good and shiny,make sure the battery is good,do not assme,if this does not help,replace the starter,this is the most likely problem,the starter is clicking.

Apr 24, 2010 | 2002 Mitsubishi Galant

2 Answers

2000 Mitsubishi Galant won't crank


Start with the old addage, "Give it fuel, Give it fire, and you will get what you desire." Check your fuel rail under the hood, it should have a valve almost like where you add air to a tire. Press the pin, fuel should shoot out of there. If not, its a fuel problem then you just trace it back down the line. Could be a fuel filter? Next, check your spark. See if your getting any to the plugs, if no, start tracing it back. Also, you didn't say if you recently replaced plugs and wires. If there are plug wires, which there should be, make sure they are connected to the right plug. If not your firing order won't be even close, so thats a no start. Check your fuel injection relay under the hood if you have one. Make sure it is working. This relay gives the fuel injectors their power. Basically, check anything that you need to make an engine run but start with the most basic first. Could be a bad MAF Sensor too. Also, don't rule out something crazy like a Crankshaft position sensor. There are ways to back probe all the sensors with a test light just look around online and find out what sensors you have and how to test them.

Nov 24, 2009 | 2000 Mitsubishi Galant

2 Answers

Engine not starting


you need to start with the basics and find if you have fuel, spark. when the no start problem is occuring.

Aug 04, 2009 | 1997 Mitsubishi Galant

3 Answers

Car won't fire when i turn it over.


car want fire 95 dodge adventure

Apr 04, 2009 | 1992 Mitsubishi Galant

Not finding what you are looking for?
1993 Mitsubishi Galant Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...