Question about 1998 Ford Escort

1 Answer

How to put it back in timeing ??? - 1998 Ford Escort

Posted by on

  • its420_us May 11, 2010

    Do you mean replace your timing belt?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,144 Answers

Http://www.autozone.com/autozone/ymme/ymmeYear.jsp?_requestid=304737
Go to this web site. Since you were not very specific and not enough info on your vehicle, you can fill in you specific specs and go to the DIY section and look for what you need.
\
Hope this helps you out. and good luck

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge neon timing


u need to put number one piston all the way to the top. u can take out the sparkplug and put a screwdriver in the hole. move the crank till piston reaches the top. then line up the timing marks and reinstall the chain.

Apr 04, 2014 | 1997 Dodge Neon

1 Answer

The timing chain came off the upper sprocket of my Yamaha 660 engine. Can you tell me how to put it back on and how to tighten the chain?


in between the bottom and top timing gears there is a tensioner pulley. to put it back on loosen the tension put the chain back on and then tension it again. to tight will cause the engine to idle high to low will cause it to idle low. also would recommend replacing timing chain and gears wile you're at it.

Oct 27, 2013 | Cars & Trucks

1 Answer

Put water pump on now getting no fire


think you have not put the timing back right and it will need to be re done. hope you used a new belt and adjuster when you put it back together. you need to re line the timing marks on cams and on crank. then put the belt on adjust up making sure the number 1 piston is at the top as well as the timing marks on the cam check this with the crank making, put belt on and adjust up then turn engine one full turn. no spark plugs fitted. back to the timing marks making sure they line up if not re adjust the time until it line back up every time you turn the engine one full turn. then put the spark plugs in etc and start enging.

Oct 15, 2013 | 1992 Oldsmobile Eighty Eight

1 Answer

Need diagram for 1997 toyota camry 2.2 timing marks


Quick fix timing TDCproblem 0. Jack up car on passenger's side, block up for safety. 1. Remove tire #17 lug bolts
2. Remove skirt #10 2 bolts
3. Set crank to TDC "0" #17 bolt on crankshaft. 4. Loosen Power steering pump adjuster bolt #14 remove beltoff pulley. 5. Push PS pump back to fire wall far as possible. 6. Remove both bolts lower dog bone #14 bolts. they are a dog to get off.
6b step one withbraker bar get them loose. 6c Get smaller 1/4" socket wrench to fit on it. #14 1/4 to slip on it in a tight place. 6d Removebolts. Put in lower bone bolts in a cup for i.d.
7. Remove upper dog bolts. Put it upper dog bone cup. 8. Take out dog bone. parts 9. Remove bolts holding in upper timing belt cover. put intiming belt cover cup. 10. Remove upper timing belt cover. Yellow 11. unlock tichner #14 push down on tinchner lock it to makeloose belt. remove thespring with needle nose pliers if it makes it eazy. 12 MOVE CAM TO SEE THE HOLE AND THE ROUND HOLE BEHIND IT,NOT THE OTHER MARK.AS THE BOOK SAYS. THE ROUND HOLE IS ABOUT 5DEG BEFORE THESLIT MARK THAT YOU DON'T WANT TO USE. 13 SLIP THE BELT BACK ON CENTER THE TENCHIN ON THE BELT INBOTH DIRECTIONS FROMTHE CAM SHAFT. ONE TOOTH BACK OF FOWARD RECHECK CAM ANDCRANK MARKS. TIGHTEN IT UP TIME. 14 RELEACE TISHINGNER, TIGHTEN BELT PUSH CAM TO THE LEFT. TO GET TIGHT INBOTH DIRECTIONS TEST FOR PLUCK TONE. 15 START UP CHK TIMING WITH LIGHT. 16 BUT POWER STERING PUMP BACK TIGHT. 17 PUT TIMING COVER BACK ON 18 REINSTALL DOG BONE 19 PUT SKRIT BACK ON 20 PUT TIRE BACK ON. TEST IT ON 3 TRIPS.

Oct 13, 2010 | Toyota Camry Cars & Trucks

1 Answer

How to put the timing belt back into my car a 1994 Murcury Tracer. The timing belt had came off the car and I had to go new timing belt to put back into the car and I have no idea how to put a timing belt...


if you have no idea then this is not something you are going to wanna attempt. It is a very delicate proccess. And if you get it wrong you will ruin your engine. By ruin i mean blow it up. The engine has to be exactly in time or it will ruin your valves

Aug 21, 2010 | 1994 Mercury Tracer

1 Answer

Timing on 1984 nissan pick-up just put back together timings off how to set?


is there any way to put and set timming chain back on after I have droped it and lost the markings

May 15, 2010 | 1984 Isuzu Pickup

1 Answer

I need to find the timing (TDC) marks for my 95 isuzu rodeo. I had to replace the front main seal gasket. I had to pull the harmonic balancer to get to the seal. I put everything back together & now...


There is no way that could happen unless you did not put the woodruff key back into the crankshaft recess and put crank pulley on random!!!

Apr 11, 2010 | 1995 Isuzu Rodeo

1 Answer

How do you put a 1992 isuzu rodeo back in time?


you mean the timing chain broke??? you will need it replaced and when they do that, it will be back in time.

Sep 23, 2009 | 1992 Isuzu Rodeo

1 Answer

I replaced the head gasket on my 91 honda civic now it wont crank over???


did you put the belt back on the camshaft correctly while removing the head off the block changing the head gasket? if you dint than timing is off... STOP everything and check make sure you put everything back in timing... if you did you may have to rotate dizzie back and forth to catch the correct timing while turning your engine, "Caution" all hondas' engine is interference engine which mean if you put the timing incorrect position you will damage your valves. its very important that you put the timing back in the correct position, if not you will damage your head and valves.

Apr 30, 2009 | 1991 Honda Civic

1 Answer

1987 Buick Century 1.5 liter


You have to remove the engine covor. Then you have to remove the lifters off the camshaft. You then have to remove the Timing belt. The top gear on the timing belt has to be removed as well. then you pull the Seal out of the Camshaft. Then the Camshaft should come out. You put your new Camshaft in, then put the new seal on the camshaft. Then you put the gear back on. There is a hash mark inside of the gear, that needs to be top center. You then need to take the first spark plug out and put a screw driver in there. you then need to turn the bottom gear (where the timing belt goes) clockwise until you can feel the first cylinder come all the way up(you feel this with the screw driver). then you put the Timing Belt back on without moving any of the gears at all. The lifters have to be torqued on. They just cannot be put back on. There is a torque specification for those lifters, every vehicle is different. When you get those lifters back on, you put the lid to the engine back on. Then you are done. I hope this was helpful.

Dec 01, 2008 | 1987 Buick Century

Not finding what you are looking for?
1998 Ford Escort Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...