Question about 1995 Jeep Grand Cherokee

1 Answer

Windows wont roll down

I have a 04 Jeep Chereokee My alarm doesnt work and my driverside door wont lock when I hit the button on my key chain the rest of the doors will lock. My windows wont roll down the lights inside my car stay on if I have the dash board lit up. At first it was my passenger back window that wouldnt roll up changed the switch and then all the windows wouldnt roll down and then they would and now nothing.

Posted by on

  • Richard Scordino May 11, 2010

    Check wires in rubber tunnel between door and body?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I suspecft this is a security programming situation. I have something similar going on with my '95. I have to get an owners manual to find the sequences. I stumbled into this by manually locking the front door and turning on the key with the door open.
re: the dash lights. I find if I have the interior light dimmer all the way to the right it locks out some things but moving it back to the middle puts it back in operational mode. aside from the flashing, non playing stero. At least I can drive it and powerlock the doors IF the doors are closed.

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i stop a atd killswitch in a from turning on when driverside doorlock doesnt work and only have 1 key to car and no alarm clicker either


Most car alarm and stereo installers may be able to help you. I took apart the driver's door lock on one vehicle, removed the tumblers and reassembled it but eventually someone messed with it and I was stuck

Jan 26, 2015 | 1990 Lexus LS 400

1 Answer

The security system wont disengage and let me start car what do i do?


This depends on if its a factory alarm or not,if its factory then try using the key to unlock the door if it doesnt work on the driverside then unlock the passenger side door this is due to a bad door lock switch on the driver door, if its aftermarket you nned to look under the dash and find the wire for the starter coming down the steering column, you will see a yellow wire i belive the wire will be cut in half and connected to two diffrent wires, cut it and connect it back together and it will start you will then need to look further for fuses on alarm wires and remove the fuses as the alarm module is bad, a good way to tell its a factory alarm is the trucks horn is the siren, if this is the case then its probably factory and door switch is bad in the lock so try pass/side lock.hope this is helpful.

Sep 02, 2010 | 1999 Jeep Grand Cherokee

1 Answer

The power door locks is not working except when using the remote


the car has gone into SAFE mode,just lock and hold down button(30 secs),then unlock and hold down button(30secs).try to use remotes only,as the car knows its you.....

Mar 30, 2010 | 2004 Infiniti QX56

1 Answer

2007 Jeep Liberty Doors wont lock, radio doesnt work.


lol find your fuze box chang the burnt fuze

Jun 13, 2009 | 2007 Jeep Liberty Sport

7 Answers

04 Jeep Power Windows


THIS REALLY WORKS****** Saved atleast $600 easy
Ok so when you open your driver door there is a black boot that goes from the body of Jeep to the door (inside the Jam when you open door-its visable) Take this loose...inside there is a wire bundle...there was a black and orange wire in there that were both broken....All we did was strip these and reconnect them w/ connector....Voila..windows all roll up and down..interior lights come on and the locks work and the power mirrors....I AM SO HAPPY THAT THIS WORKED SAVED ME SO MUCH $$$$

Jan 25, 2009 | 2004 Jeep Grand Cherokee

4 Answers

The alarm isnt working... car wont start, buttons wont work!


Just a possibility, but a discharged battery could be the culprit. Do the headlights come on brightly? Will the horn blow normally? A 'dead' battery will usually have enough power to illuminate LED warning lights, while not having enough current to operate the starter/door solenoids, etc. Have somebody test the battery voltage to be sure.

Mar 14, 2017 | Toyota Corolla Cars & Trucks

1 Answer

1994 jeep grand cherokee power window problem


try replacing the master switch it maybe malfunctioning due to wear.or may have shorted out by getting wet or something.since it is the primary control for all windows and power door locks.

Dec 05, 2008 | 1994 Jeep Cherokee

6 Answers

Jeep alarm will not turn off


The ignition security on/off is located at the trunk lock. unlock and lock rear gate and the alarm will turn off. My jeep sat in my drive for a month before a jeep tech told me this. It still triggers the security sometimes when I unlock the passenger door with the key and I go straight to the rear gate lock and it shuts off instantly.

Jun 27, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...