Question about 2005 Hyundai Tucson

2 Answers

Abs light on constently on 2005 tucson

Hi,

changed my brakes front and rear and since my abs light as been on.

Well comes on atfer maybe 100 to 200 meters of driving when car is started.

Before light comes on the brakes work rather lightlhy.

How can i fix problem.

Posted by on

  • robertp1971 Jun 17, 2009

    thaks for the reply,



    what would it have to do with the battery?



    and is it normal that it only comes on after the drives for +/- 200 meters?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 76,848 Answers

When this light is on a system trouble code will be present in the memory of the ABS electronic control module, the dealer will have to test it for the code, the most likely cause is the wheel speed sensor, but there are four and guessing is very expensive, have the test run.

Posted on Jun 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 499 Answers

Check ur battery

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset brake lite on my 2005 X type jaguar?


which brake warning light is on? the xtype does not have pad wear sensors fitted. so i guess you mean the abs light or the handbrake light.more than likely its the abs light and the common problem is the reluctor rings on one or the other of the rear outer constant velocity joints corroded/ fell off get the fault codes out of the abs module to help.

Aug 22, 2015 | 2005 Jaguar X-Type

2 Answers

Abs light staying on


The ABS light comes on when there is a malfuntion in the ABS system, not when the brakes are low. On a Ford you more than likely have a dirty sensor or pick up ring on the back side of the rotor. And no you do not have to change the rear drum brakes when changing your front pads but they should be inspected.
Usually you will change 2-3 sets of front pads before the rears need to be changed.

Jun 22, 2014 | 2005 Ford F-150 SuperCab

1 Answer

2005 kia optima abs& brake light ON


Try the master cylinder if that's not it try the brake booster, but first bleed all the brake lines starting with the driver rear then move forward if no pedal then proceed to master and booster

Jan 04, 2014 | 2005 Kia Optima

2 Answers

I have a 2005 cavalier: the abs light come on cleaned both front sensors, replaced the left front sensor, light still come on. My obdII scan reader doesn't indicate an error. I borrowed a scanner from a...


Have you checked your brake system for leaks? You may have air in the system that can cause the ABS light to come on. I had a similar problem with my last truck. ABS light came on and found a hole rusted through one of my rear brake lines.

Sep 29, 2013 | 2005 Chevrolet Cavalier

1 Answer

How do you reset ABS sytem for 2005 mazda tribute rear brakes


There is a split valve on the rear brakes ensuring the correct amount of pressure build up compared to the front ones. Check the fluid is pumping through correctly.
There is no need to replace the reluctor rings as you have no ABS error.

Apr 08, 2017 | 2005 Mazda Tribute

1 Answer

Need Help. My 2005 Dodge Ram has the abs and brake light on, and the speedo is not working. I have changed the speed control sensor on the rear diff and the transmisson 2 times, though maybe I got a bad...


The ABS and BRAKE warning lights are on in the cluster because there is an active fault in the ABS module. The speed sensors that you have replaced are not direct inputs to the instrument cluster. Your truck should have one or possibly two front wheel speed sensors and one speed sensor in the rear diff. These are all direct inputs to the ABS module which are then calculated and sent out on the "bus" communication wire which is read by the cluster. It would be much easier to diagnose this problem by knowing what the active codes are in the ABS module.

Jan 23, 2011 | Dodge Ram Cars & Trucks

1 Answer

Hi, I have a 2005 tucson, i applied my handbreak yesterday in my driveway and now it won,t fully release. back wheel is making a noise when i go forward. my question is, do i have to replace it or can i...


YOU NEED TO ADJUST REAR PARKING BRAKE AT THE LEVER.FIRST OF ALL YOU NEED TO BLOCK FRONT WHEELS.THEN RAISE THE REAR OF THE VECHICLE.SUPPORT WITH JACK STANDS.MAKE SURE YOU ARE ON HARD LEVEL SOLID GROUND WHEN USING JACK STANDS.AFTER RAISING THE CAR SET PARKING BRAKE 1 CLICK TOWARD ENGAGEMENT.REMOVE FLOOR CONSOLE.TIGHTEN THE ADJUSTING NUT UNTIL THE PARKING BRAKES DRAG SLIGHTLY WHEN THE REAR WHEELS ARE TURNED.RELEASE THE PARKING BRAKE COMPLETELY.CHECK IG PARKING BRAKES DRAG WHEN REAR WHEELS ARE TURNED.READJUST IT NECESSARY UNTIL THERE IS NO BRAKE DRAG FROM THE PARKING BRAKES.

Apr 20, 2010 | 2005 Hyundai Tucson

1 Answer

I changed the brake pads on a 05 equinox


Did you bump the ABS pickup at the wheel hub when you changed the brakes? Or are the wires maybe nicked? The noise is normal and might go away depending on the brake pad type you replaced with. The ABS problem might be caused by you.

Nov 24, 2009 | 2005 Chevrolet Equinox

1 Answer

2005 impala


All the hubs on the car have the abs sensor built into the hub. The abs system has to be re set to read the sensor . The rear hub bearing if noisy should be replaced. There are wiring harnesses that connect to the abs sensor. The harnesses to each of the abs sensor should be replaced.

Mar 18, 2009 | 2005 Chevrolet Impala

1 Answer

Rear end leak (not brake fluid)


Hi

Check your shocker, sounds like the leak could be from there ?

A FixYa rating would be nice please !

John.



Feb 10, 2009 | 2005 Hyundai Tucson

Not finding what you are looking for?
2005 Hyundai Tucson Logo

445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...