Nissan X trail 2008 - No spark after engine overhaul!

no engine or vin told or vin digit told #8digit is engine
for a gas engine, gasoline, petrol
one thing that ends spark is
16years old spark plugs are no good.
if the cmp and ckp sensor are good but are out of time
there will be no spark
why not scan the PCM to see that. it wants to tell you but you do not ask it, whY?

http://www.reliable-store.com/products/nissan-x-trail-t31-2007-2009-factory-service-manual

Please check the link I attach below. I hope you will get the solution of your problem.

2006 Nissan Trail Workshop Repair Service Manual PDF Download


for easy and best solution visit this link

Please check the video I am sharing.

Although I have never heard of a starter "swinging," I think you mean that it cranks the engine but the engine does not actually engage. Next step, check for adequate spark. If there is no spark, check your timing belt first (common problem as vehicles age). After that, check COIL PACK, and PLUG WIRES. Also, read out ODB codes from the engine to determine if there have been any sensor anomalies. Did you have a CHECK ENGINE light before the failure occurred?

Check for Codes ?

Looked at scan tool data?

Check for vacuum leaks?

Check Nissan Bulletins?

Remove battery terminal for more than 1 minute or longer - it will reset automatically. This is what I did to reset the computer BUT if you want to re-program the computer you need to take it to a Nissan dealer. Hope I was of any help!

did you call NISSAN?

please go to this site for info, .aa1car.com/library/no_spark.htm. and click on first link. good-day!

Get the factory repair manual from nissan it will show you all tech specs on rebuilding it.