Question about 2006 Ford Crown Victoria

2 Answers

My AM/FM Radio in my 2006 Ford Crown Vic does not receive a signal. I have power, but no signal, I've been told the wire has likely come loose in the trunk area. Where would the wire for the antenna be located?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 2,007 Answers

Your antenna is built into the rear window. You should be able to see the connection in the upper part of the trunk under the back window. If it isn't loose there, I suspect your antenna wire has come loose from the rear of your radio, or else the antenna wire is damaged somewhere in between the radio and the rear window. You'll have to pull it out and inspect it.

Posted on Jun 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

Assuming they were referring to the power antenna (if your car is so equipt), it would be inside the trunck liner along the side where the antenna is. You will see the post of the antenna, the motor and the wiring from the motor.
Greg

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the wiring diagram to my 1987 crown vic turnsigs


If you type in the address bar, "1987 Ford Crown Victoria wiring diagrams" you will get multiple hits. Most of the time a collage of photos and wiring details will appear and you just click on the one that looks best. Just use the search feature

Mar 11, 2015 | 1987 Ford Crown Victoria

1 Answer

Radio on 97 crown vic wont stop scanning real fast


Who told you to use WD40? WD40 is a lubricant, it leaves a residue. And it can short out your radio. It could be the scan button is shorted or if it doesn't pick up stations, a problem with the antenna or receiver.

Mar 01, 2015 | 1997 Ford Crown Victoria

1 Answer

I have a 96 crown vic ,, is it normal for the car to cut out or off bc the battery cables are a little loose?


check the wires that go to you cap the wires that go thur the houseing could have a bare wire makeing contact on the dis houseing

Aug 30, 2012 | 1996 Ford Crown Victoria

2 Answers

1985 ford crown vic ltd 352 200k miles been running good burns NO oil.\r\ndriving at night engine shuts down. I turn lights off, wiggle turn signal switch and it starts again. Once I was making a right...


I dont see if the turn signal light has to do any thing with the engine shutting off, make sure the IAC idle air control valve is working, air filter is good, fuel filter is good and IF your vehicle has a power steering pressure switch then that could be causing it but with 1985 Crown Vic I dout it.

Feb 27, 2011 | 1991 Ford LTD Crown Victoria

1 Answer

Radio does not work in 1993 crown vic, want to put in a replaceme


Go to your local auto parts store where you can purchase a Ford audio removal tool. It looks like a wire shaped "U" that is inserted in the holes on face of audio system ..Follow the directions for use , you will find it a pretty easy task with the correct tool..

Dec 07, 2008 | 1993 Ford Crown Victoria

1 Answer

1997 Crown Vic blows radio fuses


The quickest way to find a short circuit is by putting a bulb in place of the fuse. Anytime the time the bulb lights there is a load. And if the load is a shorted wire the brightness of the bulb will give you a hint. So while you're at it, finding a 'short' is a quicky...keep your eyes on the bulb. gotcha!

Sep 24, 2008 | 1998 Ford Crown Victoria

1 Answer

1997 Crown Vic blows radio fuses


Try checking all the grounds for the radio, over time they can weeken. If that doesn't work, put in a new ground wire with a heavier gauge, that should fix it. It sounds like a ground problem.

Good luck, Daniel

Jul 09, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
2006 Ford Crown Victoria Logo

Related Topics:

656 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...